Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
Features and Benefits Multi mode, single mode with SC or ST fiber connector Link Fault Pass-Through (LFP) (media converters should work as a pair) -10 to 60°C operating temperature range DIP Switch to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21 industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
ASUS USB-BT400 - network adapter. External Interface (Bus) Type USB 2.0 Dimensions (WxDxH) 1.947 cm x 1.6 cm x 0.81 cm Weight 2.2 g Data Link Protocol Bluetooth 4.0 Data Transfer Rate 3 Mbps Frequency Band 2.4 GHz
The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM - 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.
SXT G is a low cost, high speed 5GHz outdoor wireless device, with a Gigabit port, to fully utilize the capacity of 802.11n. SXT G can be used for point to point links or as a CPE for point to multipoint installations. Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.
Superior ProcessingUbiquiti Networks introduces our proprietary INVICTUS™ core communications processing engine. The speed, power, and efficiency of this integrated circuit enhances the performance of airFiber AF5/AF5U.Efficient Use of 5 GHz BandairFiber AF5/AF5U features 1 MHz center channel resolution with market-leading Power Envelope Tracking technology. airFiber AF5/AF5U accurately and continuously controls transmit power relative to the band edge. The power level automatically tracks to optimize performance near band edges, allowing you to choose the part of the band with the least interference. Long-Range LinksNewly developed for airFiber AF5/AF5U, the patent-pending xRT feature uses an innovative, adaptive multi-channel coding scheme to enhance radio transceiver performance, thereby maximizing your link budget and spectrum utilization – while still maintaining regulatory compliance. This results in links that can span distances from 10 m up to 100+ km.Quick and Easy InstallationThe unique sliding-clamp design of airFiber AF5/AF5U allows mounting hardware to be pre-assembled prior to installation – no more dropped screws at the top of the tower. As an added convenience, the drop-in cradle mount design allows the installer to attach mounting hardware to the pole without having to support the weight of the airFiber radio during installation.Radio Alignment DisplayIntroduced on airFiber AF5/AF5U, the Radio Alignment Display (RAD) makes aiming quicker and easier. The dual, calibrated signal strength indicators display the actual signal strength on the local and remote airFiber radios in real time. The comprehensive array of radio status indicators display the following:• GPS synchronization status• Master/slave mode• RF link status• RF overload warning• Current modulation mode• Link activity and speed for wired management and data ports
AirMax Omni is a Carrier Class omnidirectional antenna that was designed to seamlessly integrate with Rocket M radios (sold separately).Rocket M combines the “brains” in one robust unit, pair Rocket M with AirMax Omni to create powerful 360 omnidirectional coverage. This seamless integration gives network architects unparalleled flexibility and convenience.Rocket Mount Included. AirMax Omni antennas all come with a universal Rocket M mount for easy installation.RF Cables Included. Rugged, weatherproof RF cables are included with AirMax Omni antennas.
Hi-gain 16dBi 2X2 MIMO performance for long distance 900MHz applications. Designed to be seamlessly paired with Rocket M900 hardware.Set contains 2pcs Yagi antennas.
Outdoor versionLonger 48V cable runs capable because of increased efficiency of power delivery (less current)Additional +/-15kV of ethernet isolation and ESD/Surge protection to deviceWorks seamlessly with Cisco Catalyst and other 802.3af Switches for remote power control
3GHz, AirOS, POE-RJ-45 Connector, Standard 802.11n.The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP AirMax base-station applications.Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
The RB400L is low cost series. The RB411L has one miniPCI slot and one Ethernet port. Use this device in an outdoor case for a CPE device, or a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. It’s powered by an Atheros 300MHz CPU and has 32MB of RAM and a Level3 RouterOS license. Differences between RB411 and RB411L can be seen in the file "RB400L differences" which you can download in the left side menu.
RouterBOARD 411 with 300MHz Atheros CPU, 32MB RAM, 1 LAN, 1 MiniPCI, 1 MiniPCIe, 1 USB slot, RouterOS L4.The RB411U is a versatile yet very small device. It includes all - a miniPCI slot, a USB 2.0 port and a miniPCI-E slot for connecting a 3G card. A SIM card slot for 3G is also present on the RB411U.RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time.One small device - with all the power of RouterOS. At a very special price. SpecificationsCPU Atheros AR7130 300MHz embedded processorMemory 32MB SDRAM onboard memory chipBoot loader RouterBOOTData storage 64MB onboard NAND memory chipEthernet ports One 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/XMiniPCI slot One MiniPCI Type IIIA/IIIB slotOne MiniPCIe slot for 3G modem (onboard SIM connector)Wireless not built in, possible by adding a miniPCI cardExpansion USB 2.0 with 5V 1A supplyExtras Reset switch, Beeper, Input voltage monitorSerial port One DB9 RS232C asynchronous serial portLEDs Power, NAND activity, 5 user LEDsPower options Power over Ethernet: 10..28V DC (except power over datalines).Power jack: 10..28V DCPower Consumption 3-12WTemperature Operational: -20°C to +70°C (-4°F to 158°F)Humidity Operational: 70% relative humidity (non-condensing)Currently supported OS RouterOS 3.x, Level4 license included
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat6 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 100pcs.
High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.
Scotch Super 33+ on T1-klassi elektriteip. Mõeldud juhtmete ja kaablite elektriühenduste isoleerimiseks kuni 600V ja max 105°C. Omadused: • Väga hea mehaaniline vastupidavus, samuti niiskusele, kemikaalidele. UV-kindel. • Väga head elektrilised omadused Tehnilised andmed: (ASTM D1000): • Värv: must • Materjal: PVC • Paksus: 0,18 mm • Murdumiskindlus: 250 % 22 °C, 100 % -18°C • Kleepuvus: 794 g/25 mm, teras • Temperatuurivahemik: • Paigaldamine: min -18°C (CSA) • Pidevalt: max105°C (CSA), 80°C (UL510) • Tulekindlus: isesumbuv (UL510) • Läbilöögipinge: 8750 V • Sertifikaadid: UL 510, CSA, FI Paigaldamine. Scotch Super 33+ paigaldatakse samamoodi kui vinüülteipe üldiselt. Mähkige vähemalt kaks kihti 50% kattuvusega. Venitage veidi teipi enne mähkimist, et teip jääks tihedalt vastu isoleeritavat pinda. Viimast kihti mitte venitada, see väldib teibi lahtikerimist. Valige sobiv teibi tüüp vastavalt ümbritsevale temperatuurile. Tavatingimustes võib kasutada ka odavamat T2 klassi elektriteipi Scotch 710 või T3 klassi Temflex 1500. Raskemates tingimustes kasutage paksemat Scotch Super 88 elektriteipi.
Main Features Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector Provides 1 x 100 Mbps multi-mode/single-mode SC type fiber port Provides internal jumper for Link Fault Pass-through (LFP) setting Supports full/half duplex flow control Supports store and forward transmission Supports auto-negotiation Supports MDI/MDI-X auto crossover Supports redundant +12-48 VDC power input Provides flexible mounting: DIN-rail & Panel Mounting Supports wide Operating Temperature from -40 ~ 75° C Datasheet
Enable the power management of 8 devices through an RS232 terminal connection. The S8 Slave is power distribution and control unit that can be used either as a slave to the M8 or connected to the AdderLink IP (and other Adder KVM switches*) to provide total remote control of connected servers and their associated power supplies. Power can then be recycled across a number of ports and selected securely from an integrated On-Screen-Display menu. Controlled power outlets can be extended up to 32 by cascading up to four slave models using one RS232 connection (total load 80 A / 230 V). Two separate power inputs improve security and increase total current load (20 A or 230 V) Built-in serial interface allows easy control using simple ASC11 commands (can be used by any server or KVM switch to individually control the 8 power outlets Sequenced power start ups and shut downs outlet by outlet reduces inrush currents Front panel LEDs provide quick status checks Number of controlled outlets can be extended by cascading
