DIN LATT Sisseehitatud, integreeritud DIN-kinnitus KOMPAKTNE 102 x 25 x 81,5 mm GIGABIT ETHERNET 4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s 7-57 V Lai valik toetatud toitepingeid KESTVUS Vastupidav alumiiniumist korpus -40 °C KUNI 75 °C Lai töötemperatuurivahemik TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus. Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid. TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega. 10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime. 2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
With a passive twin-ax cable assembly of 1 meter and two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks.
JetStream 52-Port Gigabit L2+ Managed Switch with 48-Port PoE+ - 384 W PoE Budget: 48× 802.3at/af-compliant PoE+ ports with a total power supply of 384 W*. - Full Gigabit Ports: 48× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Static Routing: Helps route internal traffic for more efficient use of network resources. - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. - Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
wAP LTE kit is a tiny weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on the tightest budget possible. It features an Ethernet port with passive PoE-in, but there are more ways to power this affordable access point: there’s also a standard DC jack and an automotive plug. The new revision features a new LTE modem that offers improved connectivity, the addition of the popular B28 band, and a massive price drop! wAP LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP attracts less attention and blends into any environment.
Cutting-edge 4G network – share internet access with up to 64 Wi-Fi devices and enjoy download speeds of up to 150 Mbps AC1200 Wi-Fi – creates simultaneous dual band Wi-Fi networks, with maximum speeds of up to 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band Plug a SIM card and play – no configurations needed, compatibility for SIM cards in 100+ countries are assured by years of field tests Two detachable advanced LTE antennas – enjoy stable and efficient connections to every device thanks to the two external antennas Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access if you can't get a 4G connection
Router LT400 Outdoor LTE FDD/TDD Cat 4 N300 Wi-Fi 1 x 10/100Mbps WAN/LAN Nano SIM Slot 24V Passive PoE 2 x Internal WiFi Antennas + 2 x Detachable 4G Antennas VPN & DDNS IP65 WaterProof Turn Everywhere 4G into N300 Wi-FiWith 4G Cat.4 standards, LT400 Outdoor communicates with a 4G tower with speeds of up to 150 Mbps download and 50 Mbps upload. It features a N300 Wi-Fi, providing reliable network for web browsing,video streaming, surveilance, and POS services.Boosted Wi-Fi Coverage with BeamformingTested Wi-Fi coverage performance in four dierent scenarios, achieved by Beamforming technology and two built-in antennas. If your space is too large for one Cudy 4G Outdoor Router to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.Insert a SIM, Enjoy Wi-FiInstall Wi-Fi anywhere is as easy as plugging a SIM card and booting it up with the PoE adapter. One PoE Adapter is included in the box.Pull Network to 100 m AwayPlug your Ethernet cable into the PoE adapter/switch to get up to 100 m of wired network reach. The extra cable is not included in the box.Install an AP for Indoor Wi-FiConnect an AP to the PoE adapter to equip your cafe, home, or oce with a better Wi-Fi signal. AP needs to bepurchased separately.Install Extension AntennasThe default 4G antennas are as sensitive as a standard phone's antennas. You can still replace them with customized ones via the SMA connectors.
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
Teltonika OTD144 Outdoor Wi-Fi Router Teltonika OTD144 Outdoor Wi-Fi Router is a functional outdoor router designed to provide stable wireless and wired network access in harsh environmental conditions. The device combines LTE Cat 4 mobile connectivity with a Wi-Fi access point, enabling efficient distribution of the internet signal in open spaces and industrial facilities. The product is a suitable solution for video surveillance systems, urban infrastructure and telemetry data collection points, ensuring continuous data transmission in places without traditional cable connections. Hardware design, PoE power standards and IP55 resistance The router’s design is based on components enclosed in a sealed plastic housing with an IP55 protection rating, which guarantees resistance to weather conditions such as rain, dust and changing temperatures. The Teltonika OTD144 model has been equipped with two Ethernet ports, one of which supports PoE-in (power input), and the other PoE-out (power output). This technical solution allows data and power to be transmitted via a single structured cable, as well as direct power supply to another peripheral device, for example an external IP camera. Reliable mobile transmission thanks to Dual SIM Auto Failover Efficient network continuity is provided by the built-in LTE Cat 4 modem working with the Dual SIM system. The Auto Failover function allows two SIM cards from different mobile operators to be installed, protecting the infrastructure against sudden loss of connectivity in the event of a main network failure or a drop in radio signal strength. The router automatically switches traffic to the backup SIM card, which is very useful in unattended field installations where constant data transmission access is critical. Management via the RutOS operating system and integration with RMS The device operates under the control of the stable RutOS operating system, based on the OpenWRT Linux distribution, which provides extensive network configuration options and optimal data packet management. This software supports the creation of secure VPN tunnels, advanced firewall rules and Hotspot functions. Full compatibility with the Remote Management System (RMS) cloud platform enables administrators to remotely monitor signal parameters, change settings and carry out hardware diagnostics without the need to be physically present at the installation site. Simple field installation and advanced security features The Teltonika OTD144 router features an integrated mounting bracket, which simplifies and shortens the installation process on masts or building walls. The security of transmitted information in the wireless structure is protected by current Wi-Fi encryption standards. The device allows logical separation of user traffic by creating isolated subnets, which increases data protection and makes it easier to deploy secure public access points in urban spaces. Technical data Parameter Value Brand Teltonika Model OTD144 Device type Outdoor mobile router (Outdoor Router) Mobile technology LTE Cat 4 (up to 150 Mb/s) SIM card support Dual SIM with Auto Failover function Wireless connectivity Wi-Fi (with Hotspot function) Wired interfaces 2 x Ethernet RJ45 (1 x PoE-in, 1 x PoE-out) Operating system RutOS (based on OpenWRT Linux) Security Firewall, VPN (OpenVPN, IPsec), Wi-Fi encryption Enclosure protection rating IP55 (weather resistance) Remote management Compatible with Teltonika Remote Management System (RMS) Key advantages IP55 weather resistance: The robust housing structure protects the components from rain, dust and external factors. Dual SIM technology: The Auto Failover mechanism automatically switches the connection to the backup card in the event of a network failure. PoE power and distribution: PoE-in support simplifies cabling, while the PoE-out port allows additional peripheral devices to be powered. RutOS software: The operating system provides advanced routing, Firewall configuration and VPN security features. Integrated bracket: The factory mounting design makes it easier to install the equipment securely in the intended location. The product is a proposal for Installers of outdoor IP surveillance systems looking for a stable router with the ability to power cameras via PoE-out. Administrators of urban and industrial networks who need an efficient Wi-Fi access point for use in open spaces. Companies carrying out telemetry and industrial automation projects that require a stable LTE connection in harsh environmental conditions.
Excellent N speed brings best experience for video streaming and internet calls Dual external antennas deliver performance enhancement One button to easily setup a highly secured wireless link 1.5 meters USB extension cable enables convenient hardware connection Supports Windows 2000 / XP / Vista / 7
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE.
Tested according to Link Performance Class E, for up to 250 MHz UL certified Housing of steel sheet Shielded RJ45 female sockets, 8P8C 1U Cable installation via LSA strips, colour-coded as per EIA/TIA 568B Fixing option for cable ties, central ground connection.Portide hulk24Pistmik(ud)RJ45Toetatud kaablitüübidCat6Toote värvHallPüstikmontaažJahPüstiku mahutavus1UKaabliühendusLSA
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.HARDWAREMobile4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMACPUQuad Core ARM Cortex A7 717 MHz CPUMemory256 MBytes Flash, 256 MBytes DDR3 RAMEthernet4 x 1 Gbit Ethernet ports: 1 x WAN (configurable as LAN), 3 x LANWiFiDual-Band 802.11ac Wave 2 (WiFi 5) with MU-MIMO support and data transmission rates up to 867 Mbps.Power supply9 - 50 VDC, 4 pin DC connectorConnectors1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA, 1 x GPS SMASIM2 x external SIM holdersStatus LEDs1 x Power, 2 x SIM, 3 x Mobile network type, 5 x Signal Strength, 2 x WiFi band status, 1 x WiFi status, 8 x Ethernet status, 4 x WAN type LEDsOperating temperature-40 °C to 75 °CHousingFull aluminium with grounding terminalDimensions115 mm x 95 mm x 44 mmWeight456 gSOFTWAREOperating systemRutOS (OpenWrt based Linux OS)SIM switch2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection failMultiple PDNPossibility to use different PDNs for multiple network access and servicesNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, TelnetNetworking featuresNAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsUnique networking featuresVLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto FailoverConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionAutheticationPre-shared key, digital certificates, X.509 certificatesKeep settingsUpdate FW without losing current configurationMonitoring & ManagementWEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMSSupported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment provided