Ubiquiti PoE POE-24-12W, 24VDC @ 0.5A, Fast Ethernet Accessory Name POE 24V - 12W Package Type Retail Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pieces in pack 1 Packs in Box 1
Original part number U3METALGLAN Product name i-tec USB 3.0 Metal Gigabit Ethernet Adapter 1x USB 3.0 to RJ-45 LED Producer iTec Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type 1x female USB 3.0 A-type Plug 2 type 1 x RJ45 Other information Other information Colour Space Gray Additional information 1x USB 3.0 connector, for connecting to a laptop, tablet or PC1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speedsSupports Wake-on-LAN, Jumbo frame up to 9k bytes, detection of cable crossoverSupport IEEE 802.3az (Energy Efficient Ethernet)IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loadingChipset Realtek RTL8153Powered through USB bus, no power adapter is neededOS: Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS, Linux, Android More info i-tec USB 3.0 adapter metal Gigabit Ethernet
Plug and Play Compatibility Use the Ubiquiti PAK-620 Precision Alignment Kit with any of these dish antennas: airFiber® AF-5G30-S45, PowerBeam™ PBE-5AC-620, PowerBeam PBE-M5-620, and RocketDish™ RD-5G30-LW. Optimal Link Deployment Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance.
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
Built to Fight Noise With Prism Active RF Filter The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronization) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Using airMAX ac technology, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). It also offers the following features:All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the PrismStation 5AC for your specific installation requirements:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mounting30°60°90°Management Wi-Fi Radio The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Enhanced Co-Location Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.Improved Noise Immunity PrismStationTM AC blocks or spatially filters out noise,so noise immunity is improved.This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Hight MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The PrismStationTM AC also gets maximum gain out of the smallest footprint. Beam Performance Perfected The PrismStationTM can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Now with airOS®8 Sporting an all-new design for improved usability, airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX® ac products
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
Delocki adapter laiendab arvutit või sülearvutit ühe võrguliidese võrra USB Type-A liidese kaudu.SpetsifikatsioonÜhendused:1 x USB 5 Gbps Type-A isend1 x Gigabit LAN RJ45 pesaKiibistik: ASIX AX88179Andmeedastuskiirus:Ethernet kuni 10 Mbit/s (pool/täielik dupleks)Fast Ethernet kuni 100 Mbit/s (pool-/täielik dupleks)Gigabit Ethernet kuni 1000 Mbit/s (pool-/täielik dupleks)Ühildub järgmiste seadmetega:IEEE 802.3: 10BASE-TIEEE 802.3u: 100BASE-TXIEEE 802.3ab: 1000BASE-TToetab Auto MDI-X (standard- või crossover võrgukaabli automaatne tuvastamine)Toetab Wake On LAN (WOL)Toetab IEEE 802.3az (energiatõhus Ethernet)Toetab täisdupleksset tööd IEEE 802.3x voolujuhtimisega ja pooldupleksset tööd tagasilöögiga.Ühildub allapoole USB 2.0-gaLED-indikaator linki ja aktiivsuse kohtaUSB-vahendi toiteallikasKaabli pikkus ilma pistikuteta: ca 50 cmMõõtmed (LxSxK): ca. 68 x 30 x 18 mmSüsteeminõudedLinuxi tuum 3.13 või uuemMac OS 10.7 või uuemWindows 7/7-64/8.1/8.1-64/10/10-64PC või sülearvuti, millel on vaba USB A-tüüpi portPaketi sisuUSB 3.0 Gigabit LAN adapterJuhi CDKasutusjuhend
SAVIO CL-63 Wifi 802.11/n USB adapter/card 150Mbps with antenna, blister 1- 14 transmit/receive channels Maximum transmission power 20dBm LED indicator
Industrial LTE Cat 4 Gateway Board TRB140 is equipped with a single Ethernet port, Digital Inputs/Outputs and micro-USB port. TRB140 compact design makes this Gateway perfect for an application where a sole gadget must be granted reliable Internet connectivity. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.MobileLTE(Cat4)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTEEthernet1 x 10/100/1000 MbpsInput/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketConfiguration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)Remote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight35 g
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 plug Wiring type: FTP-shielded 4 twisted-pair kaabel Lisaandmed: This splitter enables you to double a fixed võrguseade connection, without the need, 8P8C LAN FTP port combiner/splitter adapter värv: Aluminum kõrgus: 25 mm laius: 68 mm pikkus: 200 mm
Throughput: 48 Forwarding rate: 1488 Packet buffer: 3.5 MAC address table size: 16000 Jumbo frame size: 9 Number of VLAN groups: 0 Power consumption: 15.7 Mean time between failures (MTBF): 336072 Weight: 0.76
