The LANCOM GS-4530XP is a switch designed to meet the demands of modern networking environments. With a throughput of 324 Gbps and a total of 30 ports, including 12 10/100/1000 (PoE+) and 12 100/1000/2.5G (PoE+), it offers connectivity options. Its stackable form factor and internal power supply with power redundancy ensure reliability and flexibility for various network configurations. Featuring support for Layer 3 switching and management protocols such as SNMP 1, SNMP 2c, and SNMP 3, this switch allows for efficient remote management. The integration of Quality of Service (QoS), Voice VLAN, and multiple Spanning Tree Protocols (STP, RSTP, MSTP) enhances performance by ensuring smooth traffic handling. Additionally, the 4MB packet buffer further supports high traffic loads, making LANCOM GS-4530XP a capable solution for businesses looking to optimize their network infrastructure.
The 8-port Gigabit L2+ Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports are integrated that can be configured for specific requirements using various interfaces. The installation height is one rack unit.
The 8-port Gigabit PoE Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports with PoE+ support and a total output of 80 watts are integrated, which you can use to operate devices such as wireless access points, IP cameras or VoIP telephones. The switch can be configured for specific requirements using various interfaces. The installation height is one rack unit.
The DIGITUS Fast Ethernet switch is designed to meet the demands of modern network environments, offering a blend of power, protection, and performance. With a PoE budget of 185 W, it can power multiple devices directly through network cables, simplifying installations and reducing clutter. The switch features 16 PoE ports for Fast Ethernet connectivity, along with Gigabit and SFP uplink options, providing flexibility for connecting a variety of devices. Robust electrical surge protection is ensured with 4 KV and 6 KV ESD protectors, safeguarding your network against unexpected electrical spikes. Advanced networking features like VLAN support, MAC address auto-learning, and PD-Alive function enhance network efficiency, security, and device management. Built to last, this switch boasts a MTBF of 50,000 hours and complies with numerous EU directives and standards, ensuring a reliable and compliant solution for your networking needs.
The LANCOM GS-3652X switch is designed to meet the demands of modern networks, offering a blend of performance, security, and manageability. With a total of 52 ports, including PoE+ and 2.5G PoE+ options, it provides flexible connectivity for a variety of devices. The switch's impressive throughput of 212 Gbps and switching capacity of 130 million packets per second ensure that data flows smoothly across the network, making it an ideal solution for environments requiring high-speed data transfer and reliable operation. Security is a top priority, with features like RADIUS and TACACS+ authentication, MD5 and SSL encryption, and advanced VLAN support ensuring a secure network environment. The LANCOM GS-3652X's rack-mountable design, complete with a mounting kit, allows for easy integration into any standard rack, making it a versatile choice for any business looking to enhance its network infrastructure.
Metro Ethernet Switches DGS-1210/ME SeriesFlexible Hardware Design Available in multiple configurations: Combinations of 1000BASE-T and SFP Designed for standard 1U rack-mounting Rear panel RPS connector for an additional external power supply Layer 2 Features 16K MAC address table IEEE 802.1D STP, 802.1w RSTP, and 802.1s MSTP Loopback detection Supports IEEE 802.3ad Link Aggregation Port-based Q-in-Q VLAN Trunking Security and Authentication Port security SSH/SSL IP-MAC-Port Binding (IMPB) Access Control List (ACL) and IEEE 802.1X Guest VLAN Reliability and Maintenance Surge protection on all Gigabit Ethernet ports ITU-T G.8032 ERPS sub-50 ms protection and recovery Dying Gasp for quick trouble shooting during power failures or system shut downs The DGS-1210/ME Series Metro Ethernet Switches are a range of switches designed for Metro Ethernet applications. They feature a variety of port configurations, including 10/100/1000BASE-T RJ-45 ports and 1G SFP ports for increased network bandwidth. Surge protection, advanced Layer 2 functions, and a suite of security and management tools make the DGS-1210/ME Series Metro Ethernet Switches ideal for Metro Ethernet applications.Efficient and ResilientFor mission critical environments, the DGS-1210/ME Series Metro Ethernet Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability.This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.Security & AuthenticationThe DGS-1210/ME Series supports IEEE 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control to the network. The IP- MAC-Port Binding (IMPB) feature allows administrators to associate a source IP address with a designated MAC address and also offers the flexibility to define the port number to enhance user access control.The built-in D-Link Safeguard Engine protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.Management CapabilitiesA user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the devices capabilities and identity to the local network, allowing administrators to better manage their network topology. Each portalso supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads. Traffic & Bandwidth ControlIntegrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth. Multicast ApplicationsThe DGS-1210/ME Series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone. Additionally, ISM VLAN profiles allow users to bind or replace the predefined multicast registration information to subscriber ports quickly and easily.
LevelOne POW-2432. Total effekt: 75 W, Vekselstrømsindgangsspænding: 90 - 264 V, Vekselstrømsindgangsfrekvens: 47 - 63 Hz. Gennemsnitstid mellem fejl (MTBF): 486200 t, Sikkerhed: EN 55032 (CISPR32) Class A EN 61000-3-2,-3,EACTPTC020,CNS13438 Class A EN 61000-4-2,3,4,5,6,8,11..., Oprindelsesland: Kina. Produktfarve: Blå, Sølv. Bredde: 32 mm, Dybde: 102 mm, Højde: 125,2 mm. Pakkebredde: 53 mm, Pakkedybde: 132 mm, Pakkehøjde: 147 mm
JetStream 8-Port Gigabit L2 Managed Switch with 2 SFP Slots TP-LINK JetStream gigabit L2 managed switch TL-SG3210 provides 8 10/100/1000Mbps ports. The switch provides high performance, enterprise-level QoS, advanced security strategies and rich layer 2 management features. Moreover, the switch also comes equipped with 2 gigabit SFP slots, expanding your network flexibly. TL-SG3210 is the cost-effective network solution for the ideal small and medium business. TL-SG3210 has robust security and management features. The IP-MAC-Port-VID Binding and Access Control List(ACL) functions protect against broadcast storms, ARP and Denial-of-Service(DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP and RMON, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive Layer 2 Switch and gigabit capability, TP-LINK JetStream L2 managed Switch TL-SG3210 provides you the ideal access-edge solution.
Welcome to the forefront of networking: the future-proof CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit port we’ve seen so far. With 16x 100 Gigabit QSFP28 ports, 4x 25 Gigabit SFP28 ports, and an extra pair of 10 Gigabit Ethernet ports, this switch can bring a lot of value to complicated enterprise networks, data centers, multimedia studios, and other setups where you would typically use several devices. Now – a single CRS520 can do the trick! Avid CCR users might recognize the powerful quad-core ARM CPU running at 2 GHz, and ask – why would a switch need all that power? Two reasons: 1) CRS520 is more than a switch. You can run OSPF/BGP, out-of-band/management VPNs, ACLs, Jumbo frames and even L3HW Offloaded routing; 2) Future-proofing: as our friends at Marvell keep expanding the capabilities of their spectacular switch-chips, our in-house software team is busy exploring ways to add even more Hardware Offloaded features. You can expect software updates that will take the CRS520 to the next level! And all that without any paywalls or subscriptions. Two hot-swap power supplies and four hot-swap fans for cooling are included. This switch can also be powered by the PW48V-12V150W Hot Swap -48V DC telecom power supply, available separately.
UTP cat.6 network cable Vention IBEHG 1,5 m (grey)The cable will find its use at home, work, hotel, etc. It provides a fast and stable Internet connection of 1000 Mbps without interference, so you can freely play games without delays, watch movies or work. In addition, the use of copper and gold-plated connectors affects the efficiency of the product, and the PVC finish provides protection against wear, splashing and stretching.ManufacturerVentionModelIBEHGColorgreyLength1,5 m InterfaceRJ45 to RJ45Transmission speed1000 Mbps
UTP cat.6 network cable Vention IBEHF 1 m (grey)The cable will find its use at home, work, hotel, etc. It provides a fast and stable Internet connection of 1000 Mbps without interference, so you can freely play games without delays, watch movies or work. In addition, the use of copper and gold-plated connectors affects the efficiency of the product, and the PVC finish provides protection against wear, splashing and stretching.ManufacturerVentionModelIBEHFColorgreyLength1 m InterfaceRJ45 to RJ45Transmission speed1000 Mbps
Hama Cat 6A võrgukaabel pakub ülikiiret andmeedastust kiirusega kuni 10 Gbit/s. Kaabel on S/FTP varjestatud, mis tagab usaldusväärse ja stabiilse ühenduse ka kõige nõudlikumates võrgukeskkondades. See kaabel on ideaalne valik kiire ja turvalise võrguühenduse loomiseks. • Cat 6A standard, kiirus kuni 10 Gbit/s • S/FTP varjestus maksimaalse häirekaitse jaoks • Usaldusväärne ja stabiilne võrguühendus • Kvaliteetne ja vastupidav disain
GS1010PE 10-Port Gigabit PoE+ Switch Total PoE budget up to 120 watts Up to 30 watts of PoE power from a single port 8 10/100/1000Mbps PoE+ ports 2 10/100/1000Mbps uplinks Complies with IEEE802.3af/at standards IEEE 802.3x flow control
FS1010P 8-Port 10/100M PoE+ Switch with 2 Uplink Ports Supports IEEE802.3at and IEEE802.3af Total PoE output power 120W, up to 32W for one PoE port Support IEEE802.3x full duplex and half duplex flow control Support VLAN and CCTV functions Panel LEDs to monitor operating status and assist in fault analysis Perfect security mechanism
Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.
Tõhustatud turvalisus Ajax CombiProtect on juhtmevaba kaks ühes turvaseade mis pakub teie kodu või ettevõtte jaoks igakülgset kaitset. CombiProtect kasutab nii ülitundlikku PIR (passiivne infrapuna) andurit liikumise tuvastamiseks kui ka täiustatud akustilist andurit mis tunneb ära puruneva klaasi heli. Selline kahekordne lähenemine vähendab valehäireid tagades samas kiire reageerimise tegelikele sissetungikatsetele. Kogemused usaldusväärse toimimise kohta isegi kõikuvate temperatuuride korral. CombiProtectil on sisseehitatud temperatuurikompensatsioon mis tagab täpse tuvastamise sõltumata keskkonnast. Saamatu turvahaldus CombiProtect on mõeldud kiireks ja lihtsaks paigaldamiseks. Tänu juhtmevabale konstruktsioonile ja eelpaigaldatud akule on selle seadistamiseks ja Ajax-keskusega ühendamiseks vaja minimaalset tehnilist asjatundlikkust. Kasutage intuitiivset Ajaxi mobiilirakendust et jälgida CombiProtecti seisundit eemalt saada koheseid teateid sündmuste kohta ja konfigureerida seadeid et optimeerida jõudlust teie konkreetsetele vajadustele. Seade töötab kuni 5 aastat ühe CR123A patareiga mis vähendab hooldust ja suurendab mugavust. Usaldusväärne kaitse Ajax CombiProtect on varustatud võltsimiskaitsega mis hoiatab teid kui keegi üritab seda paigaldatud kohast eemaldada. Detektor kasutab turvalist Jewelleri raadiosidet mis tagab suurema ulatuse ja usaldusväärse andmeedastuse isegi suurtes hoonetes või keerulistes keskkondades. Ajax CombiProtect ühendab täiustatud tehnoloogia ja kasutajasõbralikud funktsioonid ning pakub usaldusväärset ja mugavat lahendust teie vara kaitsmiseks sissetungikatsete eest. Tähelepanu! See toode on mõeldud rahvusvahelistele turgudele ja ei ühildu USA / CA eeskirjadega.
Das geschirmte CAT 6A Keystone Modul-Set DN-93615 von DIGITUS überzeugt durch zukunftsorientierte Standards und High-End Qualität für Ihr Netzwerk. Die kompakte Bauform erlaubt eine Reiheninstallation in 483 mm (19“) 1HE Panel. Die werkzeugfreie Installation erfolgt über LSA-Leisten, farbcodiert nach EIA/TIA 568 A&B. Durch seine kompakte Bauform passt das Modul außerdem in designkompatible modulare Anschlussdosen.
TP-LINK 10-Port Gigabit Desktop Switch with 8-Port PoE+ - 9× gigabit RJ45 ports, and 1× gigabit combo SFP/RJ45 Port - 8× PoE+ ports transfer data and power via a single cable with a total power budget of 123 W* - Compliance with IEEE 802.3af/at PoE+, the switch supports PoE Power up to 30 W for each PoE port - Up to 250 m data and power transmission range under Extend Mode** - Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive applications - Isolation Mode allows one-click client traffic separation for higher security and performance - Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery. - Plug and play with no configuration required - Fanless design reduces power consumption and works silently in its location
Flat UTP Cat 6 Network Cable Vention IBJBI 3mEnjoy fast internet in almost any situation. The Vention UTP Cat 6 network cable provides transmission speeds of up to 1000 Mbps, making it perfect for various applications. You can use it successfully while watching movies, working, or playing games, and it is compatible with many popular devices such as laptops, computers, routers, printers, smart boxes, televisions, and more. Furthermore, the cable is very easy to transport.Well-Designed ConstructionThe Vention cable stands out with its flat design and a thickness of only 1.6 mm, making installation much easier. You can easily route it under doors or behind your desk – it will fit even in very narrow spaces. It is also characterized by high flexibility and durability – it is protected from damage by a wear-resistant PVC coating. In addition, copper wires and gold-plated connectors made of phosphor bronze ensure fast transmission. It is worth noting the special lock that keeps the cable securely in place after connection, so you don't have to worry about it coming loose or falling out. BrandVentionModelIBJBIInterfaceRJ45Transmission SpeedUp to 1000 MbpsAWG32AWGMaterialPVCCable Length3m
The Ubiquiti UniFi camera mount is a solution for securing outdoor surveillance cameras at a corner location. Constructed with durable stainless steel and polycarbonate, this mount withstands the elements, ensuring reliable performance. Its weatherproof design provides peace of mind, allowing for dependable use in various outdoor conditions.Designed for easy installation, this corner mountable product enhances the stability of your camera and maximizes the viewing angle, making it a practical choice for effective monitoring. Whether used in residential, commercial, or industrial settings, this mount is engineered to meet the demands of any environment while maintaining a sleek appearance that complements your outdoor setup.
Freewell Variable ND 82mm Magnetic Filter SetFreewell's Variable ND 82mm Magnetic Filter Set is the most versatile VND system on the market today, providing access to a range of features to achieve the desired effects in any conditions. With it, you can easily reduce light (VND2-5, VND6-9), eliminate glare (CPL) or achieve a foggy image effect (VNDXMIST2-5, VNDXMIST6-9, GLOW MIST). The high-resolution optical glass with 18-layer multiple coating guarantees a pristine image, and the solid magnetic construction ensures stability and reliability. In addition, the hard alloy and extended range of 2 to 9 degrees gives you full control over the amount of incoming light. You'll also find a magnetic quick-change mechanism and a protective case included.A range of featuresFreewell filters offer as many as 7 main features and stand out for their wide application possibilities. The set includes the VND2-5 and SND6-9 filters, which allow precise control over the amount of light entering the camera. The VND6-9XMIST filter, on the other hand, combines variable light attenuation with a fog effect for incredible artistic possibilities. The CPL filter eliminates glare and enhances colors, while the GLOW MIST filter gives your shots a soft look. But it doesn't stop there - you'll also have at your disposal the VND2-5XMIST filter, which combines variable light attenuation with a fog effect, and ND32/CPL, which reduces light and provides crisp colors. As an added bonus, it's compatible with the Freewell magnetic system, which means you can expand it with additional filters and create a hybrid system that will further expand your creative possibilities. Experiment and achieve the effects you've always dreamed of!20 types of functionsThe Variable ND 82mm Magnetic Filter Set will open up a multitude of possibilities and creative solutions, giving you unlimited control over light and effects. It offers up to 20 different functions. You will gain ND filter with different light attenuation, CPL that eliminates glare or MISTXND with fog effect. For example - ND 9 fstop filter reduces the amount of light by 9 degrees, which allows for longer exposure time or more controlled exposure. The CPL filter helps eliminate glare and improves color saturation. The kit also includes filter combinations, including ND32/CPL.Robust and magnetic designThe design of the filters is based on a solid frame made of aluminum using CNC technology, which guarantees durability and reliability. The accessories are equipped with a magnetic quick-change mechanism. It allows you to change the filter efficiently and conveniently, even when you are working individually. This is especially useful in dynamic situations. Now the entire set of filters is available in one system, and you can freely switch between them while recording. You no longer have to interrupt your work or waste valuable time on complicated filter installation and removal. Freewell's solution gives you complete control and freedom during creation.Included:VND2-5/CPL filterVND6-9/ND32-CPL filterVND base filterMISTXVND base filterMagnetic ring for mounting the filters on the lensProtective lens capMicrofiber clothProtective caseProducentFreewellModelFW-82-MAGVNDFilter thread size58 mm (2-5) / 62 mm(2-5) / 67 mm (2-5) / 72 mm (2-5) / 77 mm (2-5) / 82 mm (2-5) / 95 mm (2-5)Outer diameter (base ring + VND base ring + filters with a range of 2 to 5 degrees)75 mm / 79.05 mm / 84 mm / 89 mm / 93.03 mm / 95 mm / 110.5 mmThickness9.66 mm / 9.75 mm / 9.68 mm / 9.62 mm / 9.65 mm / 9.62 mm / 9.98 mmWeight (base ring + VND base ring + filters with a range of 2 to 5 degrees)56 g / 60 g / 66 g / 73 g / 77 g / 77 g / 104 gWeight (base ring + VND base ring + filters with a range of 2 to 5 degrees + cap)82 g / 88 g / 98 g / 108 g / 115 g / 116 g / 156 g
Intel Ethernet 800 series network adapters improve application efficiency and network performance with innovative and versatile capabilities. With two 25GbE SFP28 ports and key performance optimizations, the E810-XXVDA2 for OCP 3.0 supports solutions across Cloud, Enterprise, and Communications.The OCP NIC 3.0 specification defines a standardized design for a new generation of network adapters. Simple and straightforward form factors, clear manageability requirements, and improved serviceability help simplify deployment for current and emerging capabilities.Performance optimizations and port density for Cloud and Storage deployments. Application Device Queues (ADQ) provides dedicated traffic queues to reduce latency and increase application throughput Dynamic Device Personalization enables protocol- specific traffic acceleration to improve packet processing efficiency and reduce CPU overhead iWARP and RoCEv2 support provides high-speed, low-latency, high-throughput connectivity for storage targets and initiators.Accelerated packet processing for Communications workloads. Enhanced Data Plane Development Kit (DPDK) support increases packet processing speeds. Dynamic Device Personalization enables protocol- specific traffic acceleration and reduces CPU overhead for emerging high-bandwidth workloads. IEEE 1588 PTP v2 support enables precise clock synchronization across 5G.Flexible configurations. Intel Ethernet Optics, and specification-compliant Active Optical Cables and Direct Attach Cables, can support multiple configurations.
