Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
Product kirjeldus: Club3D - dokkimisjaam - USB-C 3.2 Gen 1 / Thunderbolt 3 - HDMI - GigE Product Type: dokkimisjaam Docking liides: USB-C 3.2 Gen 1 / Thunderbolt 3 Video liidesed: HDMI mõõtmed (WxDxH): 11.5 cm x 5.9 cm x 1.42 cm kaal: 116 g võrguseadeing: Gigabit Ethernet
RUT140 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil tagab see sujuva ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstusprotokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga tõhusaks kaug- ja kohapealseks haldamiseks.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4 TOITEPINGE1 x 3-poolne tööstuslikuks kasutamiseks kohandatud toitepistikupesaLIHTNE PAIGALDAMINELihtne paigaldus integreeritud DIN-riba klambrigaRMSKaugjuhtimine, juurdepääs ja VPN-teenused
The TP-Link Omada SG3210X-M2 V1 is a versatile and powerful switch designed to meet the demands of modern networks. With its 8 2.5GBase-T ports and 2 10GBase-X SFP+ ports, it offers ample connectivity for devices requiring high-speed data transfer. Security is a priority, featuring robust protocols such as RADIUS, SSH, and TACACS+, along with 802.1x authentication and ACL support to protect against unauthorized access and attacks.Advanced network management capabilities allow for comprehensive control and monitoring, ensuring efficient traffic management and easy troubleshooting. The switch's fanless design ensures silent operation, making it an ideal choice for any office or data center. Additionally, its energy-efficient features not only reduce operational costs but also contribute to a greener environment. Whether for a small business or a large enterprise, the TP-Link Omada SG3210X-M2 V1 is engineered to provide reliable, secure, and high-performance networking solutions.
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5e, Shielded Lisaandmed: Set of 100 tk of shielded RJ-45 [8P8C] Cat.5E võrguseade plugs, intended mainly, for FTP LAN kaablid. värv: Metal
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: Metal
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two screws.
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
