The TL-SF1008P 8-port 10/100M Desktop PoE Switch provides the seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities.With four PoE ports, transfers data and power on one single cableWorking with IEEE 802.3af compliant PDs, expands home and office networkRequires no configuration and installation
Cloud Router Switch, SFP ports quantity 4, Managed, 8, Dual Power Suply: 28V 3.4V included. (Optional additional power adapter 48-57V if POE+ is required) W
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Avasta uue ajastu WiFi AX1800 Dual-Band Wi-Fi 6 sobiliku ruuteriga Archer AX23 Gigabit LAN portide ja 4 antenniga ruuter pakub ülikiiret ja usaldusväärset ühendust.
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-30W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-30W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
The Ubiquiti UniFi U6 Mesh Pro is a wireless access point that brings together speed, efficiency, and flexibility required for modern networking needs. With Wi-Fi 6 technology, it delivers high-speed Internet access across both the 2.4 GHz and 5 GHz bands, ensuring optimal performance for a wide range of online activities. Its capability to support a vast number of connected devices and provide extensive coverage makes it an ideal choice for both residential and commercial settings.Designed to perform in any environment, the U6 Mesh Pro features a ruggedized, weatherproof build that can operate under extreme temperatures and humidity levels. This, combined with advanced security features, including the WPA3 encryption, ensures a safe and reliable network experience. Whether you're looking to enhance your home network or deploy a robust solution for your business, the Ubiquiti UniFi U6 Mesh Pro offers the performance, security, and durability to meet your needs.
Unparalleled Tri-Band Speed — Boost your overall speeds up to 5760 Mbps (6 GHz) + 2880 Mbps (5 GHz) + 688 Mbps (2.4 GHz)Wi-Fi 7 Standard — Unleash the full potential of the 6 GHz band to double the bandwidth of the last generation.Wider Signal Coverage — Two multi-directional antennas with a magnetized base are designed for optimal signal reception.Reliable Bluetooth 5.4 – Security and reliability improvement over the last-gen high-speed Bluetooth 5.3Improved Security – The latest security enhancement, WPA3, provides enhanced protection for personal password safety.Fast Installation with USB Drive — Plug in the resource USB drive provided with Archer TBE550E to quickly drive without network. Enjoy the simple and friendly adapter installation.Multicolor Wi-Fi Status Lighting — Equipped with vibrant LED lighting effects, the base provides an intuitive indication of network status, enhancing both functionality and aesthetics.
The Ubiquiti UniFi U7 Pro XG offers connectivity options with wireless technologies, supporting multiple standards including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be (Wi-Fi 7). With the capacity to accommodate up to 300+ wireless clients and 6 BSSIDs per radio, this access point is designed to handle high-demand environments. The device operates in temperatures ranging from -30°C to 40°C, and can function effectively in humidity levels of 5 to 95%, ensuring reliable performance in various settings. The design allows for flexible mounting on walls or ceilings, making it adaptable to any workspace. Equipped with features such as MU-MIMO technology, band steering, and Fast Roaming, it streamlines user experience while enabling seamless connectivity. The aluminum alloy and UV stabilized polycarbonate enclosures enhance durability, while built-in security protocols like TLS encryption and RADIUS authentication provide data protection, making the Ubiquiti UniFi U7 Pro XG a choice for those seeking reliable network solutions.
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. IEEE 802.3af compliant Adjustable output power Plug-and-Play installation
The NanoSwitch N-SW is an outdoor 4-port Gigabit switch with PoE passthrough.Power Strip Simplicity for 24V Devices Simply providing 24V 2-pair input makes NanoSwitch an outdoor 4-port unmanaged switch with "always on" 24V 2-pair output on three ports.PoE Passthrough PoE In - RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch. PoE Out - RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output. Designed for Outdoor Durability The NanoSwitch features an outdoor weatherproof form factor.Operating Temperature: -30 to 70° C (-22 to 158° F)
Wireless Router, 3-pack, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz, Included Accessories 3 Power Adapters;1 RJ45 Ethernet Cable, Dimensions 190.5 x 90.7 x 90.7 mm
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
PLUG-N-PLAY Plug-n-Play, ei vaja lisakonfiguratsiooni MOUNTING Sisseehitatud DIN-kandur ja pinnapealse paigalduse võimalused 9-30V Lai valik toetatud toitepingeid TÖÖSTUSLIK DISAIN Anodeeritud alumiiniumist korpus ja paneelid -40 °C KUNI 75 °C Lai töötemperatuurivahemik ETHERNET 5 x Ethernet-porti kiirusega kuni 100 Mbit/s TSW010 pakub kõige taskukohasemat võimalust laiendada võrguühendust mitme Ethernet-seadmega. Viis 10/100 Ethernet-porti tagavad stabiilse ja usaldusväärse ühenduvuse, mis on piisav enamiku tööstuslike rakenduste jaoks, kus ei ole vaja suurt läbilaskevõimet. Lai valik toetatud toitepingeid (9-30 V) ja vastupidav konstruktsioon muudavad selle sobivaks professionaalseteks lahendusteks. Kompaktne suurus ja integreeritud DIN-kandur võimaldavad lihtsat paigaldamist erinevates tööstuskeskkondades. Translated with www.DeepL.com/Translator (free version)
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
