SAVIO CL-43 Wifi 802.11/n USB 150Mbps adapter The adapter acts as an external network card - allowing you to get Wi-Fi on computers that do not have a built-in Wi-Fi card. Main features: Compatibility with standards: IEEE 802.11b, IEEE802.11g, IEEE802.11n Intelligent Energy Saver B49 Chip: Realtek RTL8188CU Supports 64/128-bit WEP, WPA, WPA2 and WPS Power consumption: < 1.5 W Interface: USB Support for operating systems: Windows 2000, XP, Vista, Windows 7, Linux Software CD included Packaging: blister pack
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: roheline
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
See Delocki M.2 dokkimisjaam võimaldab paigaldada kaks M.2 PCIe NVMe SSD-d ja seda saab ühendada USB kaudu arvutiga või sülearvutiga. Kaasasolev USB-kaabel võimaldab ühendamist vabasse USB-C™-porti. M.2 PCIe SSD kloonimise funktsioon Kloonimisfunktsioon võimaldab kopeerida ühe SSD sisu teisele ilma arvutit kasutamata. Ideaalne testimisvahend Mälu ühendatakse lihtsalt vastupidavasse korpusesse ja seda saab kohe kasutada. Ei ole vaja kruvisid, tööriistu ega lisaseadmeid, mis tähendab, et SSD-d saab kiiresti vahetada. Spetsifikatsioon - Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane 2 x 67-pinniline M.2 võtme M pesa 1 x USB Type-C™ female (toiteallikas) - Kiibistik: Asmedia ASM2362 - Toetab M.2-mooduleid M- või B+M-klahviga PCIe (NVMe) baasil - Toetab NVM Express (NVMe) - Andmeedastuskiirus kuni 10 Gbps - Toetab UASP - LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta - Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti - Mõõtmed (LxSxK): ca. 72 x 79 x 18 mm - Hot Plug, Plug & Play Toiteallika spetsifikatsioon - Seina toiteallikas - Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 0,6 A - Väljund: 5,0 V / 3,0 A Süsteeminõuded - Android 10.0 või uuem - Chrome OS 83.0 või uuem - Linuxi 5.4 või uuem - Mac OS 10.15.6 või uuem - Windows 8.1/8.1-64/10/10-64 - Vaba USB Type-C™ pordiga või vaba Thunderbolt™ 3 pordiga seade Paketi sisu - M.2 dokkimisjaam - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 45 cm - Kaabel USB-C™ isane USB Type-A isane, pikkus ca. 80 cm (toiteallikas) - Väline toiteallikas - Kasutusjuhend
See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
wAP LR2 kit Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
Hot-swap power supply for the CCR2004 — so you can replace the power supply without having to turn off or even restart the router. Zero downtime!CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point the other one will take over. Then you can use this kit to replace the old power supply — and you don’t even have to restart the router!
Simplify your technology transition with Intel Ethernet X710-T2L and X710-T4L network adapters. Auto-negotiation of port speeds provides maximum flexibility in dual- and quad-port 10GBASE-T configurations. These low-power power supplies also support Energy Efficient Ethernet technology to effectively reduce power consumption during periods of low data activity. The X710-T2L and X710-T4L are part of the Intel Ethernet 700 series, the foundation of server connectivity; enabling broad interoperability, critical performance optimizations and increased flexibility for network solutions across communications, cloud and enterprise IT. Interoperability across multiple speeds and media types ensures broad compatibility supported by extensive testing and validation. Intelligent offload optimization and accelerators to unlock network performance on Intel Xeon-based servers. Agility kernel drivers and Data Plane Development Kit (DPDK) for scalable packet processing. The Intel Ethernet 700 Series delivers network performance across a wide range of network port speeds with intelligent offload, advanced packet processing, and high-quality open source drivers.
RUT206 on kompaktne tööstuslik ruuter, mis toetab RS232 ja RS485 jadaliideseid ning aktiivseid ja passiivseid PoE-sisendeid. Tänu vastupidavale konstruktsioonile, 2-poolusele toitesisendile ja microSD-pesa kaudu laiendatavale andmesalvestusele on see ideaalne valik mitmesuguste asjade interneti- ja M2M-rakenduste jaoks. See 4G Cat 4 ruuter on varustatud avatud lähtekoodiga RutOS-tarkvaraga ja toetab selliseid peamisi tööstuslikke protokolle nagu Modbus, DNP3 ja DLMS.ÜHENDUS4G Cat 4, 3G, 2GJADALIIDESEDRS232 ja RS485 jadakommunikatsiooniks2-POOLNE TOITESISENDLihtne ja sobib tööstuslike rakenduste jaoksPoEAktiivsed ja passiivsed PoE sisendid
Kas liidese töökindlus ja kättesaadavus mõjutab teie infrastruktuuri? HPE võrguedastusvariandid on mõeldud võrguühenduse jõudluse parandamiseks suure ribalaiusega ja madala latentsusega ühenduste jaoks arvutussõlmede, salvestussõlmede ja kommutaatorisõlmede vahel. Suurema süsteemi jõudluse tagamiseks pakuvad HPE võrguedastusvariandid ühilduvust HPE salvestuslahenduste ja võrguadapteritega.
The HPE Networking Instant On SG1004 is designed to elevate network performance with its robust features. This gateway device supports wired connectivity through four Gigabit Ethernet ports, ensuring swift data transfer rates and reliable network access. With a focus on security, this model offers a secure networking solution suitable for various environments, making it an ideal choice for small to medium-sized networks looking to enhance their infrastructure. With its straightforward setup and efficient management, the SG1004 allows users to establish a strong network foundation effortlessly. The device's simple interface and secure options cater to the needs of businesses seeking to streamline operations while maintaining a reliable connection. Experience seamless networking that meets your requirements.
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
Tootja: Gembird Tootegrupp: tööriist/tester tööriista tüüp: Crimp tool for RJ45 (8P8C) plugs, Crimp tool for RJ12 (6P6C) plugs, Crimp tool for RJ11 (4P4C) plugs Lisaandmed: universaalne modular Crimping tool, sobib all 8P8C, 6P6C ja 6P4C modular plugs, Materials laius: 184 mm kõrgus: 70 mm sügavus: 15 mm Netokaal: 280 g
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).
