unshielded LAN/network cable to connect network components with 2 RJ45 connectors UV- and water resistant double outer jacket (PE) with gold plated PINs with strain relief and latch protection suitable for 10/100/1000 Mbit-networks pair-sequence acc. to EIA/TIA 568B
Deko XE75 Pro AXE5400 tri-band 6E mesh Wi-Fi system Wi-Fi 6E for the whole house - cover an area of up to 2,900 meters with seamless next-generation Wi-Fi and make dead zones and buffering a thing of the past All-new 6 GHz band - Experience the latest Wi-Fi frequency, eliminating interference from all older devices. The 6 GHz band also provides powerful dedicated backhaul that further improves the Wi-Fi performance of non-6E devices True tri-band speed - all three Wi-Fi bands work together to unleash a total network speed of up to 5,400 Mbps for 200 devices Artificial intelligence-driven mesh - connects your home under a single name and password, while ensuring the best connections as you move from room to room TP-Link HomeShield - keeps your home network secure with state-of-the-art network and IoT protection features Easier than ever to set up - the Deco app guides you through setup step-by-step Universal compatibility - backwards compatible with all generations of Wi-Fi and works with any Internet Service Provider (ISP) and modem
Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club! There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. Obviously, there is an Ethernet port for management purposes as well. We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network. With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
In addition to four 10G SFP+ uplink, it comes with two additional 10G Multi-Gigabit (1G/2.5G/5G/10G) RJ-45 ports for more flexible connectivity. PoE models XGS2220-54FP provide additional power over Ethernet capability. This Series is built with smart fan designed to automatically adjust speeds based on the device temperature, offering near silence while the Switch is in operation.
"Cisco Catalyst 1300-24XS kommutaator on osa Cisco Catalyst 1300-24XS täielikult hallatavate kommutaatorite tootesarjast, mis pakub usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudele. Need lülitid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebipõhise armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
Patchcord cat.6 UTP 2M 10-pack fluke passed white Conductor thickness: 26AWG (7 x 0.16mm) Outer diameter: 5.4mm +/- 0.2mm Material: conductors-CCA, sheath-PVC Maximum operating frequency: up to 250 MHz Maximum data transmission speed: up to 10 Gb/s Compatible with ANSI/TIA/EIA-568-B standards Product complies with the requirements of IS0/IEC 11801 class D
Die NETGEAR Gigabit Unmanaged Switch-Serie unterstützt Unternehmen dabei, das Netzwerk kostengünstig auf Gigabit-Geschwindigkeiten und höhere Portzahlen auszuweiten. Der GS524 ergänzt die Serie und bietet 24 Gigabit Ports. Der GS524 ist energieeffizient, auf lange Lebensdauer ausgelegt und wird intensiv getestet, um die Zuverlässigkeit zu bieten, die das Unternehmen benötigt. Priorisierung des 802.1p-Datenverkehrs und Jumbo Frame Support gestatten die nahtlose Integration in komplexere Netzwerke.
Specification: ICT category: 5e Shielding type: U/UTP (no shielding) Length: 3 m Conductor thickness: 26AWG (7 x 0.15mm) Outer diameter: 4.8mm +/- 0.2mm Material of construction: Conductors: CCA Sheath: PVC Colour: Blue RAL5012 Maximum operating frequency: Up to 100MHz Maximum data transmission speed: up to 1 Gbps Compatible with ANSI/TIA/EIA-568-B standards Product complies with the requirements of IS0/IEC 11801 class D
The Ubiquiti UniFi UACC-CABLE-PATCH-EL-15M-W offers an efficient solution for enhancing your network connectivity while ensuring a seamless experience. Featuring a CAT 6 rating, this network cable supports 2.5 Gigabit Ethernet, making it ideal for high-speed data transmission. The cable is designed with Etherlighting technology, ensuring reliable performance in indoor environments. The translucent connector boots provide visibility during installations. PoE++ readiness allows powering devices through the network cable, reducing cable clutter and simplifying setups.
FS1010P 8-Port 10/100M PoE+ Switch with 2 Uplink Ports Supports IEEE802.3at and IEEE802.3af Total PoE output power 120W, up to 32W for one PoE port Support IEEE802.3x full duplex and half duplex flow control Support VLAN and CCTV functions Panel LEDs to monitor operating status and assist in fault analysis Perfect security mechanism
This particular patch panel is designed to use in main and secondary distribution points of fast telecommunications systems. It is a passive part of structured cabling used for termination and organization of twisted-pair cables within 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 7. Use of IDC/LSA connectors, provides fast and easy installation. Cable management panel attached to this product, ensures easy assembly. Stiffened shelf with handles allows easy organization of cables and stability of assembly.
CloudKey+ on võimas haldusseade, millel on kaheksatuumaline Arm® Cortex®-A53 protsessor, 3 GB RAM ja 32 GB eMMC mälu. See sisaldab 1 TB kasutaja poolt uuendatavat 2.5" SATA SSD-d videote salvestamiseks. Pilkupüüdva anodeeritud alumiiniumkorpusega seade toetab PoE-d ja Quick Charge 2.0/3.0 toiteadaptereid. 1.42-tolline halltoonides OLED-ekraan kuvab süsteemi olekut. Toetab kuni 24 HD-kaamerat, tagades tõhusa videohalduse UniFi Protect süsteemides.
Industrial LTE Cat 4 Gateway Board TRB140 is equipped with a single Ethernet port Digital Inputs/Outputs and micro-USB port. TRB140 compact design makes this Gateway perfect for an application where a sole gadget must be granted reliable Internet connectivity. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control Firewall Open VPN IPsec RMS and FOTA support.
The Gembird Cablexpert NCAC-2U5E-01 surface mount box provides a reliable solution for networking installations. This box features two RJ-45 female connectors, optimized to accommodate unshielded twisted pair (UTP) technology, making it suitable for CAT 5e applications. With a keystone type design and multiple termination options, including 110 type, LSA (Krone), and IDC, flexibility and ease of installation are ensured. The package includes screws and adhesive tape, making setup straightforward and efficient.
Effortlessly split a single high-power PoE port into multiple standard PoE connections with the compact and durable GPeRx4. Expand, extend, and power your network with ease!
"Cudy TR1200 on tipptasemel kahesageduslik Wi-Fi leviala laiendaja, mis kõrvaldab tõhusalt surnud tsoonid ja suurendab traadita võrgu leviala, tagades usaldusväärse ühenduse kogu kodus või kontoris. Tänapäeva nutikodu jaoks loodud TR1200 toetab kiirust kuni 1200 Mbit/s, võimaldades sujuvat voogedastust, mängimist ja allalaadimist mitmest seadmest samaaegselt. See töötab nii 2,4 GHz kui ka 5 GHz sagedusalas, mis tagab stabiilse ühenduse jaoks vajaliku paindlikkuse ja häirevähenduse. Tänu oma elegantsele ja kompaktsele disainile ühendatakse TR1200 otse mis tahes tavalisse pistikupessa, mis muudab selle diskreetseks täienduseks igas ruumis. Seade on varustatud intelligentsete signaali märgutuledega, mis aitavad seadet optimaalselt paigutada parima leviala saavutamiseks. Lisaks on lihtne seadistamisprotsess kasutajasõbralik, sest isegi minimaalsete tehniliste teadmistega inimesed saavad seadme paigaldada ja käivitada mõne minutiga, kasutades selleks veebilehitseja kasutajaliidest või mobiilirakendust. Lisaturvalisuse tagamiseks toetab TR1200 WPA/WPA2-protokolle, et kaitsta teie võrku volitamata juurdepääsu eest ning tagada, et teie andmed jäävad privaatseks ja turvaliseks. Stiilse disaini, lihtsa seadistamise ja võimsate võimalustega Cudy TR1200 on kohustuslik uuendus kõigile, kes soovivad tõhusalt laiendada oma Wi-Fi-võrgu ulatust.
TP-LINK Gigabit Smart Switch TL-SG2210P is equipped with 8 Gigabit RJ45 ports and 2 SFP slots, all RJ45 ports support the PoE standard with total PoE power budget of 53 W and useful PoE power management features. The switch provides high performance, enterprise-level QoS, useful security strategies and rich Layer 2 management features.TP-LINK's Gigabit Smart Switch TL-SG2210P is especially designed for the small and medium business networks that require efficient network management. TL-SG2210P comes with a comprehensive set of features, such as link aggregation group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service (QoS L2 to L4), storm control and IGMP snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What's more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
The HDBaseT HDMI KVM extender kit enables the transmission of uncompressed, high-definition audio/video signals over long distances over a CAT6A network cable (or higher specification network cable). The maximum transmission range is 150 m. Thanks to PoC technology, only one module needs to be connected to the power supply via an external power supply. The receiver module is equipped with two USB ports (1.1) for connecting a mouse and keyboard, which allows convenient control of the signal source on the output screen/display. Bi-directional infrared (IR) signal transmission is also part of the scope of this solution. HDBaseT 1.0 support over CAT6A/7/8 cable up to 100m Transmission range - Full HD (1080p / 60 Hz): 150 m (max.) Transmission range - UHD (4K / 60 Hz): 120 m (max.) 4K 2K/60Hz support (4:4:4) Video throughput: 18 Gbps EDID support (2 modes) - 1: copy - receiver with HDMI output / 2: standard - 1080p, 2 channels Two-way infrared (IR) signal transmission It is possible to connect a mouse and keyboard to the receiver module (2x USB 1.1) for convenient control of the signal source from the output display PoC (Power over Cable) only one module requires an external power supply Metal housing Suitable for wall mounting
