Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
Perfect Managed Switches with Advanced L2/L4 Switching and Security PLANET GS-4210-24T4S and GS-4210-24T4SR are the ideal Gigabit Switches which provide cost-effective advantage to local area networks and are widely accepted in the SMB office network. They offer intelligent L2/L4 data packet switching and management functions, friendly web user interface and stable operation. Besides the popular IPv6/IPv4 management and abundant L2/L4 switching functions, the GS-4210-24T4S and GS-4210-24T4SR come with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T4S and GS-4210-24T4SR are equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 4 additional 100/1000BASE-X SFP interfaces with built-in AC or AC+DC redundant power system. They offer a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-24T4S(R) supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-24T4S(R) supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Redundant AC/DC Power Supply to Ensure Continuous Operation The GS-4210-24T4SR is particularly equipped with one 100~240V AC power supply unit and one 36~72V DC power supply unit to provide an enhanced reliable and scalable redundant power supply, the continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 36~72V DC power supply, the GS-4210-24T4SR is able to act as a telecom-level device that can be located in the electronic room. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24T4S and GS-4210-24T4SR help the SMBs to step in the IPv6 era with the lowest investment as their network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-24T4S and GS-4210-24T4SR can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24T4S and GS-4210-24T4SR allow the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-24T4S and GS-4210-24T4SR are loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. They guarantee the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-24T4S and GS-4210-24T4SR offer comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. They can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Their protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Friendly and Secure Management For efficient management, the GS-4210-24T4S and GS-4210-24T4SR are equipped with web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T4S and GS-4210-24T4SR offer an easy-to-use, platform-independent management and configuration facility. For text-based management, the switches can be accessed via Telnet and the console port. By supporting the standard SNMP, the switches can be managed via any standard management software Moreover, the GS-4210-24T4S and GS-4210-24T4SR offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The GS-4210-24T4S and GS-4210-24T4SR provide 4 extra Gigabit SFP interfaces supporting 100BASE-FX/1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T4S and GS-4210-24T4SR successfully reduce substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T4S and GS-4210-24T4SR are able to operate stably and quietly in any environment without affecting their performance. Department/Edge Security and QoS Switch The GS-4210-24T4S and GS-4210-24T4SR connect up to 24 high-speed workstations in the Ethernet environment, in which their four SFP mini-GBIC interfaces provide an uplink to a department backbone. Moreover, the Switches provide 56Gbps switch fabric and high bandwidth for backbone connection. The GS-4210-24T4S and GS-4210-24T4SR improve the network efficiency and safeguard the network clients with their powerful features: IPv6/IPv4 management Layer 2 to Layer 4 security QoS 802.1x port-based and MAC-based network access authentication security Multicast IGMP snooping The advanced functionality of the GS-4210-24T4S and GS-4210-24T4SR eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-24T4S and GS-4210-24T4SR one of the best and most cost-effective switch solutions for SMBs. High-performance Backbone/Server Farm Switch Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 56Gbps non-blocking switch fabric, the GS-4210-24T4S and GS-4210-24T4SR can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The GS-4210-24T4S and GS-4210-24T4SR can offer the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules with the two SFP ports. FTTX/MAN Application The GS-4210-24T4S and GS-4210-24T4SR apply the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMP v3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With two dual-speed SFP slots built in, the deployment distance of the GS-4210-24T4S and GS-4210-24T4SR can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the GS-4210-24T4S and GS-4210-24T4SR can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. Physical Port 24-Port 10/100/1000BASE-T Gigabit RJ45 copper 4 100/1000BASE-X mini-GBIC/SFP slots RJ45 console interface for switch basic management and setup Reset button for system factory default Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Nailonpunutisega - Kullatud pistikud ja metallist korpus - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: antratsiit - Pikkus koos pistikutega: ca 3 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
MF4 4G LTE Mobile WiFi Share your 4G connection with download speeds up to 150Mbps and upload speeds up to 50Mbps Support for FDD and TDD bands Supports up to 11 devices simultaneously (10 wireless + 1 wired) The 2000 mAh battery lasts for 8 hours
TSW200 switch TSW200 is an industrial unmanaged switch from Teltonika Networks. It is equipped with 2 SFP ports for long-range fiber optic communication and 8 Gigabit Ethernet ports that support IEEE802.3af and IEE802.3at Power-over-Ethernet standards. Classified as Power Supply Equipment (PSE), it centralizes power, providing up to 30 watts per port. It has 10/100/1000 Mbps Ethernet ports, providing a cost-effective, high-bandwidth solution for industrial Ethernet. This rugged industrial switch is ideal for high-bandwidth professional applications where you need to provide both a reliable data connection and power.
Hama Cat 6A võrgukaabel pakub ülikiiret andmeedastust kiirusega kuni 10 Gbit/s. Kaabel on S/FTP varjestatud, mis tagab usaldusväärse ja stabiilse ühenduse ka kõige nõudlikumates võrgukeskkondades. See kaabel on ideaalne valik kiire ja turvalise võrguühenduse loomiseks. • Cat 6A standard, kiirus kuni 10 Gbit/s • S/FTP varjestus maksimaalse häirekaitse jaoks • Usaldusväärne ja stabiilne võrguühendus • Kvaliteetne ja vastupidav disain
HP W1420X TH-142XN must toonerikassett on spetsiaalselt HP laserprinteritele mõeldud esmaklassiline printimislahendus. See toonerikassett pakub silmapaistvat musta teksti ja graafikat ning teravaid ja professionaalseid tulemusi igal leheküljel, mistõttu sobib see ideaalselt nii koju kui ka kontorisse. See on 100% uus, tagades teile püsiva jõudluse ja usaldusväärsuse esimesest kuni viimase printimiseni. Kassett on valmistatud nii, et see vastab originaalvarustuse spetsifikatsioonidele või ületab neid, andes teile sama lehekülje tootlikkuse ja trükikvaliteedi soodsama hinnaga. Ükskõik, kas trükite aruandeid, dokumente või loomingulisi projekte, see tooner tagab teravad ja selged väljatrükid, mis säilitavad kvaliteedi pikema aja jooksul. Lihtsalt paigaldatav kassett on loodud nii, et see sobitub sujuvalt teie printerisse, vähendades seisakuid ja edendades katkematut tootlikkust. Tänu keskkonnasõbralikule disainile aitab see vähendada teie süsinikujalajälge, toetades säästvaid printimistavasid. Nautige sujuvat, vaevata printimist ja elavat tulemust iga kord HP W1420X TH-142XN musta toonerikassetiga, mis on mõeldud kasutajatele, kes nõuavad parimat jõudlust ja väärtust.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
TPA-C5xTwistPort Adaptor for Mimosa C5x What is TwistPortTM Adaptor TwistPort Adaptor TPA-C5x adapts Mimosa® C5x radios to RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and easy. Making Mimosa® C5x radios compatible with TwistPort allows for using the radio with any TwistPort antenna ever made and enable superior performance noise immunity and network scalability. Dual Slant or H+VTPA-C5x allows to choose between Dual Slant polarization setup or H+V polarization setup. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency with very well managed VSWR across the spectrum.
See Delocki adapter võimaldab teil ühendada tavalised kõrvaklapid, millel on kaks 3,5 mm stereopesa meesliitmikku, millel on standardne 3-pin viikude määramine, oma nutitelefoni või tahvelarvuti, millel on 3,5 mm 4-pin stereopesa emasport. Lihtsalt ühendage oma peakomplekti pistikupesa adapteri värvikooditud emasportidega. Spetsifikatsioon - Liitmik: 1 x stereopesa 3,5 mm 4-pin isasliitmik > 2 x stereopesa 3,5 mm 3-pin emasliitmik - Stereopesa emas: roosa: mikrofon / roheline: heli - Pinnide määramine 4-pin stereopesa isane OMTP-standardiga (ülemine > varrukas) Vasakpoolne heli - Parempoolne heli - AUX - GND - Värv: must - Kaabli pikkus: ca 10 cm (koos pistikutega) Süsteeminõuded - Vaba 4-pini stereopesa Pakendi sisu - Adapter
Hama Cat 6A võrgukaabel pakub ülikiiret andmeedastust kiirusega kuni 10 Gbit/s. Kaabel on S/FTP varjestatud, mis tagab usaldusväärse ja stabiilse ühenduse ka kõige nõudlikumates võrgukeskkondades. See kaabel on ideaalne valik kiire ja turvalise võrguühenduse loomiseks. • Cat 6A standard, kiirus kuni 10 Gbit/s • S/FTP varjestus maksimaalse häirekaitse jaoks • Usaldusväärne ja stabiilne võrguühendus • Kvaliteetne ja vastupidav disain
Extends keyboard, mouse, and monitor distances up to: 150m (490ft.) at 1280 x 1024 resolution and 100m (328ft.) at 1600 x 1200 resolution Controls multiple servers remotely when used with a KVM switch Displays high quality resolution up to 1600 x 1200 pixels Provides local and remote console ports to access one computer Connect the local console (transmitter) to the remote console (receiver) with an Ethernet cable Cat. 5, Cat. 5E or Cat. 6 Ethernet cable compliant Fine-tune resolution on the remote consoles viewing monitor, with Gain (resolution adjustment) and Equalization (contrast correction) PS/2 and USB interface support for loca console (transmitter) USB interface support for remote console (receiver) Data and power LED indicators Supports Windows, Mac, and Linux operating systems No driver or software installation required 2-year limited warranty
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 48 Type of ühenduspesa: 48 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
