The Ubiquiti UniFi U7 Pro is a formidable solution in the realm of network devices, offering reliable wireless performance and security. This wireless access point leverages Wi-Fi 6 technology to deliver high-speed Internet access across 2.4 GHz, 5 GHz, and 6 GHz bands, accommodating a broad spectrum of wireless clients. With the capacity to support over 300 devices and 8 BSSIDs, it is perfectly suited for environments with high-density wireless demands.Security is a priority for the Ubiquiti UniFi U7 Pro, featuring robust encryption protocols such as WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to protect against unauthorized access and ensure safe data transmission. Its durable metal housing and ability to operate in extreme temperatures from -30°C to 60°C make it a reliable choice for any setting, from offices to outdoor spaces. Additionally, the device's support for advanced network management features like 2x2 MIMO technology, Advanced QoS, and VLAN support, further enhances its appeal by offering efficient network optimization and user experience.
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
Specifications Output Voltage 54V Output Rating 1.5A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
Omada | Type Wireless Access Point | Data transmission speed 3000 Mbps | IEEE 802.11a/b/g | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax | 1x10/100/1000M | Wireless Frequency Range 2.4 GHz and 5 GHz | Included Accessories EAP653 UR Ceiling/Wall Mounting Kit Installation GuideNote: DC adapter is not included in the package, and is sold separately. | Power supply requirements 12V DC / 1.5 A (Power Adapter IS NOT included) ; 48V Passive PoE | Colour White | Dimensions 160 160 33.6 mm
The TP-Link Omada EAP673 V1 is a wireless access point designed to meet the demands of modern businesses and high-density environments. Offering Wi-Fi performance with Wi-Fi 6 technology, this device supports a data transfer rate of up to 5378 Mbps, ensuring smooth and efficient operation. It can handle over 250 concurrent clients, making it perfect for large gatherings or busy workplaces.Security is a top priority for any network, and the EAP673 V1 excels in this area. It features the WPA3 encryption standards, along with multiple authentication methods, to protect sensitive data from unauthorized access. Additionally, its cloud-managed capability allows for effortless setup, management, and updates, ensuring your network remains robust and secure.Designed for versatility, the TP-Link Omada EAP673 V1 is suitable for wall or ceiling mounting, allowing for optimal placement and coverage. Its robust design is complemented by features such as MU-MIMO technology, beamforming, and seamless roaming, which together provide a superior wireless experience. Whether you're upgrading your office network or setting up a new one, the EAP673 V1 is a powerful and reliable choice.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
The Ubiquiti UniFi U7 Pro is a formidable solution in the realm of network devices, offering reliable wireless performance and security. This wireless access point leverages Wi-Fi 6 technology to deliver high-speed Internet access across 2.4 GHz, 5 GHz, and 6 GHz bands, accommodating a broad spectrum of wireless clients. With the capacity to support over 300 devices and 8 BSSIDs, it is perfectly suited for environments with high-density wireless demands.Security is a priority for the Ubiquiti UniFi U7 Pro, featuring robust encryption protocols such as WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to protect against unauthorized access and ensure safe data transmission. Its durable metal housing and ability to operate in extreme temperatures from -30°C to 60°C make it a reliable choice for any setting, from offices to outdoor spaces. Additionally, the device's support for advanced network management features like 2x2 MIMO technology, Advanced QoS, and VLAN support, further enhances its appeal by offering efficient network optimization and user experience.
The Ubiquiti UniFi U7 Pro XG offers connectivity options with wireless technologies, supporting multiple standards including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be (Wi-Fi 7). With the capacity to accommodate up to 300+ wireless clients and 6 BSSIDs per radio, this access point is designed to handle high-demand environments. The device operates in temperatures ranging from -30°C to 40°C, and can function effectively in humidity levels of 5 to 95%, ensuring reliable performance in various settings. The design allows for flexible mounting on walls or ceilings, making it adaptable to any workspace. Equipped with features such as MU-MIMO technology, band steering, and Fast Roaming, it streamlines user experience while enabling seamless connectivity. The aluminum alloy and UV stabilized polycarbonate enclosures enhance durability, while built-in security protocols like TLS encryption and RADIUS authentication provide data protection, making the Ubiquiti UniFi U7 Pro XG a choice for those seeking reliable network solutions.
Kuni 3,6 Gbps kiirus Dual-Band WiFi • 2 × 1 Gt porti (WAN/LAN automaatne tuvastus) • Katab kuni 600 m² pindala • Lihtne kasutuselevõtt • Kolme mesh-ruuteri süsteem
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
The TL-SF1008P 8-port 10/100M Desktop PoE Switch provides the seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities.With four PoE ports, transfers data and power on one single cableWorking with IEEE 802.3af compliant PDs, expands home and office networkRequires no configuration and installation
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.HARDWAREMobile4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMACPUQuad Core ARM Cortex A7 717 MHz CPUMemory256 MBytes Flash, 256 MBytes DDR3 RAMEthernet4 x 1 Gbit Ethernet ports: 1 x WAN (configurable as LAN), 3 x LANWiFiDual-Band 802.11ac Wave 2 (WiFi 5) with MU-MIMO support and data transmission rates up to 867 Mbps.Power supply9 - 50 VDC, 4 pin DC connectorConnectors1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA, 1 x GPS SMASIM2 x external SIM holdersStatus LEDs1 x Power, 2 x SIM, 3 x Mobile network type, 5 x Signal Strength, 2 x WiFi band status, 1 x WiFi status, 8 x Ethernet status, 4 x WAN type LEDsOperating temperature-40 °C to 75 °CHousingFull aluminium with grounding terminalDimensions115 mm x 95 mm x 44 mmWeight456 gSOFTWAREOperating systemRutOS (OpenWrt based Linux OS)SIM switch2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection failMultiple PDNPossibility to use different PDNs for multiple network access and servicesNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, TelnetNetworking featuresNAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsUnique networking featuresVLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto FailoverConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionAutheticationPre-shared key, digital certificates, X.509 certificatesKeep settingsUpdate FW without losing current configurationMonitoring & ManagementWEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMSSupported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment provided
Wireless Router, 3-pack, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz, Included Accessories 3 Power Adapters;1 RJ45 Ethernet Cable, Dimensions 190.5 x 90.7 x 90.7 mm
