TSW200 switch TSW200 is an industrial unmanaged switch from Teltonika Networks. It is equipped with 2 SFP ports for long-range fiber optic communication and 8 Gigabit Ethernet ports that support IEEE802.3af and IEE802.3at Power-over-Ethernet standards. Classified as Power Supply Equipment (PSE), it centralizes power, providing up to 30 watts per port. It has 10/100/1000 Mbps Ethernet ports, providing a cost-effective, high-bandwidth solution for industrial Ethernet. This rugged industrial switch is ideal for high-bandwidth professional applications where you need to provide both a reliable data connection and power.
The new DIGITUS® Category 6 Class E, U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.Kaabli pikkus10 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Konnektori suguMeessoost/meessoostKaabli kateU/UTP (UTP)Kaabli klassEKaabli värvHallMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7Kasutamistemperatuur (T-T)-20 - 60 °CPakendi tüüpPlastkott
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C), RJ45 plug Wiring type: FTP/STP - shielded 4 twisted-pair kaabel, CAT5 Lisaandmed: bag of 100tk kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
16-Port Managed Gigabit Ethernet PoE+ Switch with 2 SFP Slots Compliant with IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 374W, Endspan, 19" rack The most important thing It enables power supply and data transmission of up to 16 PoE network devices It saves time and money by using existing network cables for power and data transmission Powered Device Monitor (PDM) restarts any connected PoE device that is not responding or sending network traffic information.
Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
TPA-C5xTwistPort Adaptor for Mimosa C5x What is TwistPortTM Adaptor TwistPort Adaptor TPA-C5x adapts Mimosa® C5x radios to RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and easy. Making Mimosa® C5x radios compatible with TwistPort allows for using the radio with any TwistPort antenna ever made and enable superior performance noise immunity and network scalability. Dual Slant or H+VTPA-C5x allows to choose between Dual Slant polarization setup or H+V polarization setup. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency with very well managed VSWR across the spectrum.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
