Interchangeable Isolation™ Antennas for PrismStation™ With a range of different beam widths, the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the PrismStation AC and IsoStation radios, these antennas deliver superb co‐location performance without sacrificing gain. Modular Design The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation AC or IsoStation radio, the system gets maximum gain out of the smallest footprint. Asymmetrical horn antennas 60° version have naturally attenuated side lobes and extremely low back radiation. They offer the best front-to-back ratio in the industry and the lowest side lobe radiation. Asymmetrical horn antennas are ideal for cluster sector installations with high co-location requirements. Features: Compatible Radios IsoStation/PrismStationHPOL Beamwidth 60°VPOL Beamwidth 60°Elevation Beamwidth 30°Electrical Downtilt 0°Cross-Pol Isolation 17 dBMax. VSWR 2:1Wind Loading (with PrismStation) 56 N @ 200 km/h (12.59 lbf @ 125 mph)Wind Survivability 200 km/h(125 mph)
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000 is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-UserMIMO (MU-MIMO). The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time. In addition, the ePMP 3000 continues interference mitigation techniques with support of the beam steering antenna for uplink, dynamic filtering for neighboring channel interference, and the robust software from the ePMP product line. The ePMP 3000 AP system consists of the ePMP 3000 AP, a 4X4 sector antenna, optional beam steering antenna and a 25 dBi and 16 dBi subscriber modules. The ePMP 3000 system boasts high packet per second performance, peak throughput of 1.2 Gbps and supporting subscriber modules with 600 Mbps of peak throughput.• Frequency Reuse: Supports GPS synchronization and SM Transmit power control to allow for frequency re- use.• Unmatched Performance and Scalability: With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active subscriber modules can be served without performance degradation.• Industry-Leading Interference Tolerance: The intelligent filtering capability on the receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the transmit side serves to reduce off-channel noise for better radio co-location.• Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the sector capacity by serving two MIMO users at the same time.
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
The UF-SM-PATCH-APC-APC features an SC/APC connector on one end of the cable and a SC/APC connector on the other end to help you build out your GPON network.Features: SC/APC to SC/APC SM G.657A1 fiber Simplex 2.0mm jacket PVC 1.5m length
Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment. Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance. Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs. Transport Networking PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation. Fiber-optic Networking for ISPs, Enterprises, and Homes With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.
Delock PCI Expressi kaart laiendab teie arvutit kahe välise USB 3.0 pordiga. Saate ühendada USB 3.0 seadmeid nagu nt. dokkimisjaamad, kaardilugejad, välised kõvakettad, hubid jne.
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 3 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
This spiral hose by Delock can be used to bundle exposed cables and protects them from dirt or damage. Simple mounting The delivery content includes a pulling tool, which allows easy threading of the cables. Reusable The cables can be easily added or removed. Multifunctional application The spiral hose can be used in the office or at home, to ensure an orderly and clearly cable installation. Note The spiral hose should be loosened beforehand by first pulling the pulling tool through the hose without cable. The pulling tool can then be pulled through the spiral hose with the cables more easily. Specification • Length: ca. 2.5 m • Diameter: ca. 30 mm • Reusable • Material: PE • Colour: black Package content • Spiral hose • Pull-in tool
Seda Delocki plaadihoidjat saab kasutada 72 mm laiuste trükkplaatide hoidmiseks, et paigaldada neid 15 mm või 35 mm DIN-ribale. Plaadihoidikut saab individuaalselt lühendada eri pikkustega. Pärast lühendamist saab kaks otsakorki uuesti peale panna. Plaadihoidja (72 mm) DIN-riba jaoks Märkus Delock pakub soovi korral täiendavaid otsakuid. Artikli number: 66064. Spetsifikatsioon Sobib 72 mm laiustele tahvlitele Keskkonnatemperatuur: -10 °C ~ 70 °C DIN-riba paigaldamine: 15 mm ja 35 mm 4 x paigaldusavad Paigaldusavade läbimõõt: 3,5 mm Kruviaugu samm: ca. 70 mm Materjal: plastik Värv: roheline Süsteeminõuded 15 mm või 35 mm DIN-kandaal Pakendi sisu 1 x tahvlihoidja 4 x kruvi 2 x otsakork
