The quickMOUNT pro LHG is a advanced wall or pole mount adapter for Mikrotik LHG antennas.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT prois possible to perfectly set antenna alignment using integrated graduated scale.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 FTP (shielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
Deploy the UniFi XG AP in very high-density environments requiring maximum wireless performance. The UniFi XG AP features simultaneous dual-band 4x4 MU-MIMO technology and convenient 802.3bt PoE compatibility.10G and 1G Ethernet Connectivity Designed to be a 10G Ethernet backhaul the primary port carries both data and PoE while the secondary Gigabit Ethernet port is for bridging and also supports PoE input.Features: 10 Gigabit Ethernet Support4x4 MU-MIMO Quad-Radio: (3) client 1 SecurityDual 5 GHz 802.11ac Wave 2 Radios3.466 Gbps Combined Radio Rate in 5 GHz800 Mbps Radio Rate in 2.4 GHzDedicated Security Radio with Persistent Threat Management1 500 Client Association Limit
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
SpecificationsOutput Voltage 24 VOutput Rating 1A (18W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
Introducing Universal Arm Bracket (UB-AM) by Ubiquiti. Designed for wall or poles, UB-AM provides a versatile and robust solution for mounting all of your devices. Now Shipping.
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
In-Wall 802.11ac Wave 2 Wi-Fi Access PointThe sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology. For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi IW HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi IW HD AP can support more than triple the number of users than a typical Wave 1 AP.Superior Processing PowerThe UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE) StandardThe UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch.Quick and Simple InstallationThe UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Product kirjeldus: HPE Aruba AP-515 (RW) - radio access point seadme tüüp: Radio access point Form Factor: In-ceiling - sisene Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, IEEE 802.11ax Frequency Band: 2.4 GHz, 5 GHz Performance: Maximum data rate (2.4 GHz): 575 Mbps Maximum data rate (5 GHz): 4.8 Gbps Aggregate bandwidth: 5.4 Gbps maht: Wireless clients per Wi-Fi radio: 256 OFDMA units: 16 BSSIDs per radio: 16 OS Required: ArubaOS, InstantOS Power Over Ethernet (PoE) Supported: PoE mõõtmed (WxDxH): 20 cm x 20 cm x 4.6 cm kaal: 810 g Manufacturer Warranty: Limited eluaegne garantii
Model: X5000R Antenna gain: 5 Security: IP address / port filtering MAC address filtering URL Filtering Management, monitoring, configuration: Internet settings Wireless settings Parental control Network settings for guests Smart QoS Power supply: 12V DC / 1A Dimensions: 241 x 147 x 48.5 mm Other features: Networking Internet configuration LAN network configuration DDNS IPTV IPv6
