Võrguseadmed

Product kirjeldus: Lanberg patch kaabel - 5 m - sinine, RAL 5012 Type: Patch kaabel - CAT 6 tehnoloogia: Foiled unshielded twisted pair (F/UTP) Shielding Material: Aluminium foil Features: Molded, snagless, stranded, drain wire, Copper-Clad Aluminium (CCA) conductors, HDPE conductor insulation pikkus: 5 m ühenduspesa: RJ-45 - male ühenduspesa (Second End): RJ-45 - male värv: Blue, RAL 5012

High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.

Selle standardsete mõõtmetega keystone moodulit saab seda kasutada hõlpsaks snap-in paigaldamiseks nt. . Keystone'i kattepaneelides, esiplaatides või pindpaigalduskarpides. Spetsifikatsioon • Pistik: USB 3.0 A emane > USB 3.0 A emane • Keystone'i portidele 19,2 x 14,9 mm • Pin-paigutus: 5 SSRX - 6 6 SSRX + 5 8 SSTX - 9 9 SSTX + 8 • Mõõdud (PxLxK): 35,2 x 17,3 x 22,3 mm Pakendi sisu • Keystone moodul

See Delocki USB-kaabel võimaldab USB 3.0 ühenduse pikendamist ja on varustatud väärika metallkorpusega ning kullatud pistikutega.     Märkus Aktiivsete USB-seadmete, nt väliste kõvakettakappide kasutamiseks on vaja ühendatud seadme jaoks täiendavat toiteallikat.     Spetsifikatsioon - Ühendused:   1 x USB 3.0 Type-A isane >   1 x USB 3.0 Type-A emane - Kaabli gabariit:   28 AWG andmeliin   24 AWG toiteliin - Paindumiskaitse liitekohal - Kaabli läbimõõt: ca 5,5 mm - Vaskjuht - Kontaktid kullatud - Ühendused kullatud punase metallkorpusega - Kaabel topeltvarjestatud - Andmeedastuskiirus kuni:   SuperSpeed 5 Gbps,   Hi-Speed 480 Mbit/s,   Full-Speed 12 Mbit/s,   Madala kiirusega 1,5 Mbit/s - Värv:   Kaabel: must   pistikud: punane - Pikkus koos pistikutega: ca. 3 m     Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port     Pakendi sisu - USB 3.0 pikenduskaabel

Patchcord, EconLine, CP2036U

Patchcord, EconLine, CP2057U

Patchcord, CP1093U

Dual Band Outdoor

8x8 Scalable airFiber NxN MIMO Multiplexer, AF-MPX8

Features:-Foil and braid shielded CAT 5e patch cable. -Spot length on boot. -Boot with kink protection and strain relief. -Connection 1:1. -4x 2 AWG 26/7. -Twisted pair.-3P CAT 5e certified.Kaabli pikkus1 mToote värvMust

Lindy 47325

CAT 6 U-UTP Patchkabel, Cu, LSZH, AWG 26/7, Länge 3 m, Farbe Weiß

10G SFP+ Transceiver, Up to 10km, Transmitting and Receiving wavelength: 1550nm, Dual LC connector DDM

10G SFP+ Transceiver, Up to 10km, Transmitting and Receiving wavelength: 1590nm, Dual LC connector DDM

The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles). Fiber Applications Long distance fiber networking for industrial, manufacturing, and corporate / education campus applications. Fiber Mode / Distance  Single-Mode transceiver spans distances up to 10km (6.2 miles) and supports up to 1.25Gbps. Compatibility  Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors.   Hot-Pluggable SFP  Hot-pluggable SFP transceiver compatible with a MSA compliant SFP slot Fiber Wavelength  Compatible with single-mode 1310nm transmissions Fiber Distance  Supports networking for distances up to 10km (6.2 miles) Fiber Interface  LC-type duplex connector Operating Temperature  Rated for an operating temperature range of -40°– 85 °C (-40° – 185 °F)

Symmetrical Horn CC Antennas Gen2 offer unique RF performance in a compact package. Scalar horn antennas have symmetrical main beam with identical beam width in Vertical and Horizontal plane. Exceptionally small side lobes ensure remarkable interference suppression. HG3-CC Gen2 Antennas are ideal for coverage of areas with clients close to the installation site, where null zone issues exist. High density AP clusters and radio co-location is made possible due to unique radiation patterns and compact size.Symmetrical Horn CC Antennas Gen2 feature multiple improvements of RF performance and design, namely, optically lighter body and significantly improved bracket. Radome is made of more resistant material, and all of HG3-CC Gen2 antennas use only two radome sizes. HG3-CC Gen2 antenna is equipped with N-female connectors.30° Symmetrical Beam Antenna HG3-CC-S30Frequency Range: 5180 - 6400 MHzGain: 18.4 dBiAzimuth Beam Width -6 dB: H 30° / V 30°Elevation Beam Width -6 dB: H 30° / V 30°Mechanical Tilt: ± 25°Pole Mounting Diameter: 30 - 90 mmUnique Beam PerformanceSymmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors, used with wide range of Radios. For example, mimosaTM, Cambium NetworksTM PMP450, LigoWaveTM, and many others. Users of UBNTTM Rocket M5 Titanium, MikroTikTM connectorized radios (NetBoxTM, BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas.

4 x Gigabit PoE+ ports 1x Gigabit port 31W PoE power budget Easy-to-use web-based management interface Supports static link aggregation, RSTP, VLAN, QoS, and IGMP Snooping Voice VLAN for VoIP applications Bandwidth control per port 10Gbps switching capacity IEEE 802.1p QoS with queue scheduling support Compact fanless design Wall mountable metal housing

Sbox USB-1031U, USB->Micro USB, 1m

Sbox USB-MICRO-90R, USB->Micro USB 90 M/M, 1.5 m

Kaabel Sbox USB-TYPEC-15G, USB->Type-C M/M, 1.5m

Cable length: 305

Broadcom NetXtreme N225P 2 x 25G OCP 3.0 sisemine fiiber 25000 Mbit/s

Edimax switch GS-5216PLC network , 16 ports