Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: Red
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
This version of our BLE tags comes completely sealed cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words this tag is dust-tight — nothing gets in and it is fully protected against close-range high-pressure high-temperature spray downs. Perfect for industrial telemetry systems or to track all kinds of heavy equipment and materials at a construction site.Like the indoor version this tag also supports iBeacon Eddystone and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5 °C precision can be very useful in cold supply chain logistics.TG-BT5-OUT features an improved 550 mAh battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces and it can handle a temperature range of -20 °C to 85 °C.
Original part number NIC-GX1 Product name Gembird 1-GIGABIT PCI-Express Fast Ethernet Card, Realtek chipset Producer Gembird Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector RJ45 Type of bus connector PCI-E 1x Wake On Lan function no data Operating system Microsoft WindowsMac OSUNIXLinux Supported protocols and standards IEEE 802.3ab - 1000BaseTIEEE 802.3u - 100BaseTXIEEE 802.1Q-in-Q - VLAN TagIEEE 802.1p - PriorityIEEE 802.3x - Flow Control Chipset Realtec Additional information Single STP RJ45 port for either1000 Mbps, 100 Mbps or 10 Mbps network speedsSupports speed auto-negotiation, pair swap/polarity/skew correctioncrossover detectionAutomatic IRQ and I/O address setupSupports Full Duplex flow control (IEEE 802.3x), power saving, Wake-on-LANremote wake-up, PCI Message Signaled Interrupt (MSI)Chipset: RTL8111CDimensions: 120 x 80 x 20 mm, x1 slotNet weight: 32 g
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: Metal
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
WE4000 Network Adapter AX5400 Wi-Fi 6/6E Bluetooth 5.2 PCIe Tri-Band 2402Mbps + 2402Mbps + 574Mbps Speed Bluetooth 5.2/4.2/4.0 Magnetic antenna base with 1.5 m RF cable Intel Wi-Fi 6E chipset AX210 802.11ax/ac/a/b/g/n
Neljast konksuga testriotsikust koosnev komplekt (kaks punast ja kaks halli). Ühildub VPS100, VPS101, VPS121 ja kõigi VPS200 seeria sondidega
