See Delocki USB 2.0 jada RS-232 muundur pakub RS-232 ühendust mõõteseadmete, POS-süsteemide, printerite, modemite, IoT-seadmete jne jaoks. Galvaaniline isolatsioon takistab andmeedastusvigade tekkimist ebaühtlase maanduspotentsiaali, maandussilmuste või pingepiikide korral. Muundur sobib DIN-riba paigaldamiseks. Galvaaniline isolatsioon Galvaaniline isoleerimine (5 KV) toimub optiliste isolaatoritega. Spetsifikatsioon - Liitmik: USB 2.0 B (emane): 1 x Mini USB 2.0 B (emane) Seade: 1 x D-Sub 9-pin jada RS-232 isane - Kiibistik: FTDI - Andmeedastuskiirus kuni 1 Mb/s - LED-indikaatorid staatuse TX / RX jaoks - 5 kV optiline isolatsioon - ± 15 kV ESD-kaitse kõikidele signaalipinidele - Energiatarbimine: 70 mA / 350 mW - Toitevarustus USB kaudu (bus-toitega) - Töötemperatuur: - 30° ~ 75° C - Säilitustemperatuur: - 40° ~ 85° C - Suhteline õhuniiskus: 5 ~ 95 % (ei kondenseeru) - Korpus: plastist - Mõõtmed (LxSxK): ca. 93 x 42 x 22 mm Süsteeminõuded - Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/10/10-64/11, Mac OS 10.5, Linuxi tuum 2.6 - PC või sülearvuti, millel on üks vaba USB-port Paketi sisu - Konverter - USB 2.0 kaabel, pikkus: ca. 1 m - Paigalduskomplekt DIN-riba jaoks - Draiverite CD - Kasutusjuhend
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. Spetsifikatsioon Ühendus: 1 x SMA-pistik Sagedusvahemik: 698 MHz - 960 MHz 1710 MHz - 2170 MHz 2500 MHz - 2700 MHz ZigBee, LoRa, DECT, Z-Wave, NB-IoT, Bluetooth, GSM, UMTS, LTE, ISM, WLAN. Antenni võimendus: 3 - 5 dBi Impedants: 50 Ohm VSWR: 1,5 Polarisatsioon: lineaarne, vertikaalne Töötemperatuur: -20 °C ~ 70 °C Korpuse materjal: plastik Värv: must Kaitseklass: IPX5 Kaabel: koaksiaalkaabel Kaabli tüüp: RG-174 A/U Kaabli värvus: must Kaabli sumbuvus: 1,5 dB @ 1,5 GHz meetri kohta Kaabli läbimõõt: ca 2,7 mm Kaabli pikkus koos pistikuga: ca 3 m Mõõtmed (LxD): ca. 120,0 x 50,0 mm Süsteeminõuded Vaba SMA-pistikuga seade Pakendi sisu Antenni
This converter by Delock enables the connection of a device with USB Type-C™ male to a USB Type-A female port. Specification • Connector: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A male (host) 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female (device) • Chipset: Etron EJ179V • Maximum output current: 1.5 A • Cable diameter: ca. 5 mm • Data transfer rate up to 10 Gbps • Colour: black • Length without connector: ca. 15 cm System requirements • PC or laptop with a free USB Type-A port Package content • USB-C™ converter
See Delocki USB 2.0 kaabel paistab silma oma nurga all oleva USB mini-B pistiku poolest ja sobib mobiilsete seadmete, nt mobiiltelefonide/nutitelefonide, digikaamerate jne. ühendamiseks vabasse USB-A porti. Nurga all olev pistik tagab stabiilse hoidmise mini USB-ämbripordi sees ja seda saab kasutada eriti raskesti ligipääsetavate portide puhul. Spetsifikatsioon - Liitmik: USB-A isane > USB mini-B isane 90° nurga all. - Kaabli gabariit: 28 AWG - 2 x ferriitsüdamik - Kullatud pistikupesa - Kaabli pikkus: ca 0,5 m Süsteeminõuded - PC või sülearvuti, millel on vaba USB-port Pakendi sisu - USB-kaabel
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
The certified LogiLink Cat.6A patch cable is ideal for data transfers up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
