- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support
Features- Extends the distance to your USB device(s) up to 12 meters (36’)- USB specification version 2.0 / 1.1 compliant- Plug and play. No additional driver required- Up to 5 extender cables can be chained for a distance of up to 60 meters- Lockable mechanical design for secure connection- Bus powered. No power adapter required- Multiplatform support – Windows, MacPackage Contents- 1x 1-Port USB 2.0 Extender CableKaabli pikkus12 mUSB versioon2.0Pistmik 1USB APistmik 2USB ASuguSisestatav konnektor/sisekonnektorToote värvValgeMaterjalPlastAndmeedastuskiirus (maksimaalne)480 Mbit/sKaal560 gUSB-pistmiku tüüpUSB Type-AKaasnevate toodete arv1 tkPortide hulk1
Original part number ISO-BEAM-620 Product name Ubiquiti IsoBeam ISO-BEAM-620 - Isolator Radome for 620 mm Dish Reflector Producer Ubiquiti Networks Class of product
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Using airMAX M5 technology, the IsoStation M5 supports up to 100+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation M5 comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation M5 for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Long Distance High Power PoE and Gigabit Data Extension SolutionHigh Power PoE for Security and Public Service ApplicationsIntelligent LED Indicator for Real-time PoE UsageConvenient and Reliable Power SystemHigh Power Budget for PoE ExtensionEnvironmentally Hardened Design
Original part number NP0004 Product name LOGILINK - Patch panel UTP CAT6 24-ports black Producer LogiLink Class of product Complete outlet Type of connector RJ45 Number of ports 24 Wiring type twisted-pair cable Category 6 Usage indoor Additional information metal coverSuitable for mounting in 19 "Standards: CAT 6 8P8C, ROHSCable installation via LSA plugsUp to 250 MHzDimensions: 500x2x1 mm
Using airMAX ac technology, the PBE-5AC-GEN2 supports up to 450+ Mbps real TCP/IP throughput. It launches with PtP functionality, and a client mode feature will be added with a future firmware upgrade. Management Wi-Fi Radio The PowerBeam® AC5 Gen2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam® AC5 Gen2 offers a more robust mount with a convenient lifting loop or handle.Integrated Radio Design Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.Plug and Play Installation The PowerBeam® AC5 Gen2 requires no tools for assembly; only a single wrench is required for pole-mounting.
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 48 Type of ühenduspesa: 48 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
Original part number DN-82020-1 Product name DIGITUS Fast Ethernet Media Converter, SC / RJ45 Producer DIGITUS Class of product Media converter Network protocol and connector type 1 FastEthernet 100BaseTX - RJ45 Network protocol and connector type 2 FastEthernet 100BaseFX - SC Wiring type multimode fibre-optic cable62.5/125 (OM1)multimode fibre-optic cable 50/125 (OM2)UTP - unschielded twisted pair cable, 4 pairsFTP/STP - shielded 4 twisted-pair cable Height 25 mm Width 70 mm Length 93 mm Net weight 0.4 kg Additional information Distance up to 2kmAuto MDI/MDI-XAuto-negotiation of full- and half-duplexCan be mounted in 19" rackin bundle: external AC adapter
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
Tootja: Gembird Tootegrupp: tööriist/tester tööriista tüüp: Crimp tool for RJ45 (8P8C) plugs, Crimp tool for RJ12 (6P6C) plugs, Crimp tool for RJ11 (4P4C) plugs Lisaandmed: universaalne modular Crimping tool, sobib all 8P8C, 6P6C ja 6P4C modular plugs, Materials laius: 184 mm kõrgus: 70 mm sügavus: 15 mm Netokaal: 280 g
Goobay CAT-kaablid edastavad signaale tippkvaliteediga ja suure kiirusega, tagades alati stabiilse ühenduse. Meie ühenduskaablite ja pistikutega seotud tootevalikusse kuuluvad kvaliteetsed sisejuhid, tugev kaablikest ja täpselt sobivad pistikupesad. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Lihtsalt. Kõik. Mida te vajate!Eelnevalt juhtmestatud, varjestamata LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseks.Kvaliteetne vasestatud alumiiniumjuhtmestik (CCA) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.RJ45-pistiku lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärse internetiühenduse.Painutuskaitse ja tugev PVC-mantel kaitsevad Ethernet-kaablit tõhusalt purunemise eest.CAT 6 võrgukaabel sobib Gigabit Ethernetile kiirusega kuni 10/100/1000 Mbit/s.Võrgupesa: paaride järjestus vastavalt EIA/TIA 568B-le.
10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
