Technicolor DGA4330 on kiirete internetiühenduste ruuter, mida iseloomustab hästi leviv ja kiire 5 GHz WiFi. Ruuter on kiire internetiühenduse (100 Mbit/s ja enam) kasutajale mõeldud seade. Ruuteri kasutab 2,4 GHz ka 5 GHz sagedust. Ruuter sobib kõikidele Telia pakutavatele püsiühendustehnoloogiatele, välja arvatud 4G ühendus. Lisaks kiirele ühendusele, on ruuter soovitatav ka juhul, kui elate kortermajas ning teie ümber on palju teisi WiFi võrke, mis sagedusel 2,4 GHz kipuvad häirima üksteise toimimist. NB! Ruuter on konfigureeritud ainult Telia püsiühenduse kasutamiseks ega sobi muude teenuste või teiste operaatorite teenuste kasutamiseks!
5G Ülikõrge mobiilside kiirus kuni 3,3 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks DUAL SIM Katkematu side koos automaatse tõrke vältimisega WI-FI 5 Kahe sagedusalaga andmeside läbilaskevõime kuni 150 kliendile samaaegselt TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega RUTX50 on teie tulevikukindel, mitut võrku hõlmav tööstuslik ruuter, mis pakub 5G-mobiilsidet kiirete ja andmemahukate rakenduste jaoks. 5G dual SIM mobiilside koos 5 Gigabit Ethernet-pordi ja kahesagedusliku Wi-Fi ühendusega võimaldab usaldusväärset üliväikese latentsusega andmeedastust. 5G-tehnoloogia võimsus koos paljude liideste ja tööstuslike riistvarafunktsioonidega tagab kohandatavuse tulevaste uuenduste ja laienduste jaoks. RUTX50 on varustatud RutOSiga, mis pakub täiustatud turvafunktsioone ja spetsiaalseid tööstusprotokolle mitmesuguste professionaalsete rakenduste stsenaariumide jaoks ning ühildub meie kaugjuhtimissüsteemiga (RMS), mis võimaldab optimeeritud kaugjuhtimise ja suure seadmepargi jälgimise võimalusi.
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1 x RJ45 2-ühenduse tüüp: 1x male USB C-type värv: Space Gray Lisaandmed: 1x USB-C 3.1 ühenduspesa, for connecting to a laptop, tablet või PC, 1x Ethernet GLAN RJ-45 port toetab 10 / 100 / 1000 Mbps speeds, toetab Wake-on-LAN, Jumbo frame Kuni 9k bytes, detection of kaabel crossover, tugi IEEE 802.3az (Energy Efficient Ethernet, IPv4/IPv6 pack Checksum Offload Engine (COE) to punaneuce CPU loading, kiibistik Realtek RTL8153, Powered through USB bus, no power adapter is needed, OS Lisainfo: i-tec USB-C Metal Gigabit Ethernet Adapter
Router 802.11ax, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 4, Mesh Support No, MU-MiMO Yes, 3G/4G via optional USB adapter, Antenna type External, 1xUSB 3.1 Gen1
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 4x10/100M, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Number of antennas 2, Wireless Frequency Range 2.412~2.472 GHz, Windows 10, Windows 8, Windows 7, MacOS, Windows 98, Windows 2000, Windows NT, Windows XP, Windows Vista, Power supply requirements 5VDC / 0.6A, Dimensions 115 x 106.7 x 24.3 mm
Boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly Compatible with 802.11 b/g/n and 802.11ac WiFi devices Dual band speeds up to 750Mbps Miniature size and wall-mounted design make it easy to deploy and move flexibly Ethernet port allows the Extender to function as a wireless adapter to connect wired devices
The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-24-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
2.4GHz, 16.3x8x3cm, 8dBi antenna, AirOS, POE-RJ-45 Connector.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 8dBi dual-polarity gain at 2GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
5-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc 5 10/100Mbps RJ45 ports With four PoE ports, transfers data and power on one single cable Working with IEEE 802.3af compliant PDs, expands home and office network Supports PoE Power up to 15.4W for each PoE port Supports PoE Power up to 58W for all PoE ports Requires no configuration and installation
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.
The TUC-ETG is a high-speed USB network adapter that allows you to easily connect to a gigabit network from a USB Type-C enabled desktop, MacBook®, or notebook PC. Compliant with a USB Type-C port and backwards compatible with USB 3.0, 2.0 and 1.1 speeds, you can share files and printers and gain access to broadband Internet.USB Type-C Easily connect to a gigabit network from a USB Type-C enabled desktop, MacBook®, or notebook PC.Compatibility Compatible with Windows® and Mac®operating systems.Gigabit Speeds Experience Full Duplex 2 Gbps Ethernet speeds with this compact USB Type-C to Gigabit adapter. Easy Setup Simple installation in minutesFlexible Connector Attached flexible 12.7 cm (5 in.) USB cable accommodates most installation scenariosUSB Powered No bulky power brick—compact adapter powered by USB port