SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
• Directional and Omnidirectional Antennas: Freely switch between modes via software for optimal signal control • Plug & Play Auto-Sensing Antennas: Automatically detects antenna changes and switches between internal and external antennas as needed • 4-Stream Dual-Band Wi-Fi 7: Up to 5.0 Gbps • 1× 2.5G PoE Port: Flexible PoE deployment reduces costs by delivering power and data over a single Ethernet cable • Outdoor-Ready Durability: Features an IP66-rated weatherproof enclosure and 6kV lightning protection • Quick and Easy Setup: Features wall/pole mounting with Omada SDN for one-click setup • Advanced Features: Centralized management, mesh, and seamless roaming
8-Port GbE PoE Web Managed SwitchThe GS1200 Series Web Managed Gigabit Switch provides simple control for better management. Unlike other advanced but complex managed switches, this series of switch is suitable for most users and provides an affordable solution with essential features including VLAN, QoS, IGMP snooping, link aggregation, and port mirroring. These functions can be completed in just a few simple clicks through an easy, friendly, and intuitive Web GUI.There are five models for GS1200 series, coming with non-PoE (GS1200-5v3/8v3) to connect to devices including PCs, NAS, and print servers, PoE capable (GS1200-5HPv3/8HPv3) to provide power to IP CAM, wall mounted AP and PoE standard devices, and fiber uplink (GS1200-10v3) for easily deployment in hallways to connect network devices on the same floor and link them back to the core network.
Hüperskaala pilviliides Ubiquiti Dream Machine Beast (UDM-Beast) on hüperskaala-klassi pilviliides, mis on loodud nõudlike ettevõtete ja suuremahuliste võrgukeskkonna jaoks. Ühendades ühes rack-monteeritavas süsteemis täiustatud marsruutimise, turvalisuse ja täieliku UniFi rakenduste toe, pakub see võimsat tsentraliseeritud võrguhaldust keerukate rakenduste jaoks. UDM-Beast toetab kogu UniFi rakenduste komplekti, sealhulgas Network, Protect, Access, Talk ja Connect, võimaldades ettevõtetel hallata mitmeid infrastruktuuriteenuseid ühelt platvormilt. Kõrge tihedusega keskkondadele loodud gateway toetab üle 7500 samaaegselt ühendatud kasutaja ja suudab hallata üle 750 UniFi seadme. Samuti toetab see kuni 200 UniFi Access Hubi ja suuremahulisi videoseadistusi, toetades kuni 100 HD-kaamerat, 60 2K-kaamerat või 40 4K-kaamerat. Süsteemil on kuni kaheksa WAN-porti paindliku ühenduvuse ja liikluse jaotamise jaoks, sealhulgas vaikimisi WAN-portid 25G SFP28 ja 10 GbE RJ45 ühenduvusega. Laiaulatuslik portide konfiguratsioon hõlmab kaheksat 10 GbE RJ45 porti, kahte 10G SFP+ porti, kahte 25G SFP28 porti ja kahte 1 GbE RJ45 porti, mis toetavad kiiret võrgu koondamist ja skaleeritavat infrastruktuuri laiendamist. Kompaktse 1U rack-mount vormiga (mõõtmetega 442,4 x 43,7 x 325 mm) Dream Machine Beast pakub ettevõttetasemel võrgujõudlust, säilitades samal ajal tõhusa rack-integratsiooni professionaalsetes IT-keskkondades. Täiustatud ohukaitse Ubiquiti Dream Machine Beast pakub ettevõttetasemel võrguturvet ja täiustatud SD-WAN-funktsionaalsust kaasaegse äriinfrastruktuuri jaoks. Süsteem on loodud toetama suure jõudlusega turvalist võrgustikku ning pakub kuni 25 Gbps IDS/IPS läbilaskevõimet, võimaldades liikluse põhjalikku kontrolli ja ohtude ennetamist võrgu kiirust ohustamata. Integreeritud seisundipõhine tulemüür, rakendustundlik 7. kihi tulemüür ja DPI-liikluse tuvastamise funktsioonid aitavad administraatoritel võrguaktiivsust täpselt jälgida ja juhtida. Täiustatud tsoonipõhine tulemüüri filtreerimine võimaldab liikluse haldamist piirkondade, domeenide ja rakenduste alusel, samas kui sisseehitatud sisu filtreerimine ja reklaamide blokeerimine pakuvad täiendavat kontrolli võrgu kasutamise ja veebiturvalisuse üle. Süsteem sisaldab üle 55 000 IDS/IPS-allkirja koos CyberSecure toega, aidates kaitsta võrke arenevate küberohtude eest. Ärikatkematuse ja töökindluse tagamiseks toetab Dream Machine Beast Shadow Mode (VRRP) värava varundust ja alalisvoolu varutoite funktsioone. Integreeritud SD-WAN-platvorm töötab ilma täiendavate litsentsikuludeta ja toetab mitmeid VPN-tehnoloogiaid, sealhulgas Site Magic, IPsec, WireGuard, OpenVPN ja L2TP. Sellised funktsioonid nagu Identity Endpoint One-Click VPN ja Teleport Zero-Configuration VPN lihtsustavad kaugjuurdepääsu kasutuselevõttu nii kasutajate kui ka administraatorite jaoks. Multi-WAN koormuse tasakaalustamine, poliitikapõhine WAN- ja VPN-marsruutimine, dünaamiline marsruutimine OSPF ja BGP abil ning täiustatud NAT-funktsioonid parandavad veelgi võrgu paindlikkust ja skaleeritavust. Koos muudavad need võimekused UDM-Beastist võimsa lahenduse organisatsioonidele, kes vajavad turvalist, suure jõudlusega võrku ja lihtsustatud tsentraliseeritud haldamist. Ettevõtte riistvaraplatvorm Ubiquiti Dream Machine Beast põhineb võimsal ettevõttetasemel riistvaral, mis on loodud nõudlike võrgukeskkonna ja pideva töö jaoks. Süsteemi südameks on 2,1 GHz kiirusel töötav kaheksatuumaline ARM v9 protsessor, mida toetab 16 GB süsteemimälu, tagades kiire rakenduste käitlemise ja tõhusa mitme teenuse samaaegse töötamise. Süsteem sisaldab ka integreeritud 128 GB SSD-ketast, mis parandab rakenduste reageerimiskiirust ja üldist kasutajakogemust. Videovalve salvestusruumi laiendamiseks on väravas kaks 3,5-tollist NVR HDD pesa, mis võimaldavad suuremahulisi UniFi Protecti rakendusi otse platvormil. Seade toetab täiustatud võrguteenuseid, sealhulgas integreeritud RADIUS-serveri funktsionaalsust, RADIUS over TLS (RadSec), kohandatavat DHCP-serveri konfiguratsiooni, IPv6 ISP-tuge, IGMP-proksit, multisaate-DNS-i, täiustatud QoS-i ja täielikku liiklusvoo nähtavust. UniFi LTE Backupi täiendavad varundusvõimalused ja internetiühenduse kvaliteedi aruandlus aitavad parandada võrgu töökindlust ja töötundide arvu. Professionaalseteks rack-paigaldusteks loodud UDM-Beast on varustatud CNC-töödeldud alumiiniumist ja SGCC-terasest korpusega ning 1,3-tollise puutetundliku LCM-ekraaniga kohalikuks haldamiseks ja seireks. Etherneti ja Bluetoothi haldusvõimalused lihtsustavad seadistamist ja haldamist, samas kui spetsiaalsed LED-indikaatorid pakuvad selget ülevaadet Etherneti, SFP+, SFP28, RPS ja HDD tegevuse riistvara seisundist. Süsteemi maksimaalne võimsustarbimine on 100 W, kasutades sisemist 150 W AC/DC toiteallikat, ning see toetab töötemperatuure vahemikus 0 kuni 40 °C. NDAA-vastavus koos CE-, FCC- ja IC-sertifikaatidega toetab veelgi ettevõtete ja valitsusasutuste kasutuselevõtu nõudeid.
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
Original part number CS22U-A7 Product name ATEN CS22U 2-Port USB KVM Switch, Remote port selector, 0.9m cables Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 2048 x 1536 pixels Active port selection pushbutton Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.8m for PC with USB, USB, D-Sub-15 conectors - 2pcs Width 82 mm Height 25 mm Depth 77 mm Net weight 310 g Additional information integrated cablesNo power supply neededsupport for multifunction keybords and mousessupport for Win, MAC, Linux and Sun Datasheet Datasheet More info More info
airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
5-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc 5 10/100Mbps RJ45 ports With four PoE ports, transfers data and power on one single cable Working with IEEE 802.3af compliant PDs, expands home and office network Supports PoE Power up to 15.4W for each PoE port Supports PoE Power up to 58W for all PoE ports Requires no configuration and installation
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e FTP (shielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , Conductor stranding pikkus: 305 m värv: hall
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
DIN LATT Sisseehitatud, integreeritud DIN-kinnitus KOMPAKTNE 102 x 25 x 81,5 mm GIGABIT ETHERNET 4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s 7-57 V Lai valik toetatud toitepingeid KESTVUS Vastupidav alumiiniumist korpus -40 °C KUNI 75 °C Lai töötemperatuurivahemik TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus. Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid. TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega. 10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime. 2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
Archer C6 V4 AC1200 Wireless MU-MIMO Gigabit Router - AC1200 Dual-Band Wi-Fi – 867 Mbps at 5 GHz and 400 Mbps at 2.4 GHz band - MU-MIMO Technology – Simultaneously transfers data to multiple devices for 2× faster performance - Boosted Coverage – Four external antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals - Access Point Mode –Supports AP Mode to transform your wired connection into the wireless network - Easy Setup – Set up your Wi-Fi in minutes with TP-Link Tether app. Archer C6 V4 Wireless Router, Available bandwidth 1200 Mbps Data transmission speed 867 Mbps, Wi-Fi 5 1 WAN, 4x10/100/1000M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Omni-Directional, Number of antennas 4 Wireless Frequency Range 2.4 and 5 GHz, Included Accessories Power Adapter;RJ45 Ethernet Cable;Quick Installation Guide Power supply requirements 12 V - 1 A, Dimensions 215 × 117 × 32 mm
JetStream 16-Port 10GE SFP+ L2+ Managed Switch 16× Full 10GE SFP+ Slots: Lightning-fast full 10 Gbps SFP+ slots provide high-bandwidth aggregation connectivity and non-blocking 320 Gbps switching capacity. Learn More about TP-Link 10G/Multi-Gigabit Switching Solutions Abundant L2 and L2+ Features: Supports a complete lineup of L2 and L2+ features including Static Routing, enterprise-level QoS, IGMP Snooping, and more. Robust Security Strategies: Helps protect LAN area investment with integrated IP-MAC-Port Binding, ACL, Port Security, 802.1X Authentication, and more. Dual Redundant Power Supplies: Two power supplies backing each other up make it an ideal choice for reliable networking architecture. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
Wi-Fi Access Point 6 AX1800 PoE DAP-X2810 Wi-Fi 6 AX1800, up to 1.8Gbps Dual-band, 2x2 MIMO, airtime fairness and bandwidth control functions Free software and Nuclias Connect app Convenient installation with PoE Configurable captive portal D-Link Lifetime Limited warranty Scalable and easy to manage corporate WiFi network 6. The DAP-X2810 with Wi-Fi 6 networking provides businesses of all sizes with fast connections, significantly increased capacity and interference-free coverage, all combined with centralised management via Nuclias Connect. Easy management of your corporate network The DAP-X2810 works with Nuclias Connect, a software-based management platform (with optional hardware controller). This enables you to manage and control your business network from anywhere via the Internet, providing easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation - Wi-Fi 6 Greater network performance and lower latency, with almost four times the capacity of previous Wi-Fi standards Secure performance WPA3 encryption provides security with high throughput with dual-band 2x2 MU-MIMO technology, bandwidth control and airtime fairness to intelligently manage users. Flexible deployment with PoE Support for Power over Ethernet (802.3at) simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. No licence required Work as a standalone access point or as part of a centralised, scalable multi-device deployment according to the needs of the business. More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options for delegated access across the network. Deployment, configuration, upgrading and expansion is possible from multiple locations using an intuitive dashboard. Captive portal Captive Portal, the industry standard for authentication, streamlines access management with the ability to add brand information. Free software and application Quickly configure, manage and monitor access points locally via a free management tool or remotely via the Nucliast Connect app. Next-generation WiFi 6 performance with huge speed improvements Combined Wi-Fi 6 802.11ax connection speeds of up to 1,800 Mbps provide the DAP-X2810 with lightning-fast transfer rates, enabling large amounts of data and efficient video streaming, even in high-density environments Next-generation Wi-Fi 6 connections deliver higher network performance and lower latency, and nearly four times the capacity of previous Wi-Fi standards. Optimised Wi-Fi for convenient connections The DAP-X2810 supports 2x2 MU-MIMO bandwidth control and beamforming functions, which are designed to reduce network congestion. In addition, load-balancing technology and Airtime Fairness manage access point loads to optimise resource utilisation. This ensures that each device connected to the network connects at peak performance without overloading the entire network. Multiple modes of operation The DAP-X2810 can be configured to suit your network needs and optimise network performance. Access point Wireless distribution system (WDS) with access point WDS/bridge (without AP broadcast) Wireless client Easy and hassle-free installation anywhere. The DAP-X2810 can be placed on a desk, ceiling or wall mounted. The PoE function makes installation quicker and easier as there is no need to lay additional power cables. This is ideal for extensive deployments in locations where power sockets are not readily available. Corporate network management with advanced control mechanisms Nuclias Connect enables you to manage and control your network from anywhere. It provides insight into network performance and user activity through traffic analysis and status reports, available in a browser or free app. Detailed data from network traffic analysis, which can be displayed for the entire network down to the single access point level, can be used to create business value. Comprehensive on-site network management Nuclias Connect, compared to traditional hardware-based unified management systems, offers a great deal of flexibility. Easy configuration, remote access and an intuitive dashboard provide administrators with management efficiency and convenience, while functionality and automated network tools such as airtime fairness, throttling location and load balancing improve the user experience. Scale up your WiFi network as your business grows Nuclias Connect enables unlimited scalability, allowing you to adapt the size of your network to suit your business requirements. Expanding or setting up a network in a new location is quick and easy. Management and configuration is done via the cloud, and access points and surveillance cameras are automatically detected and ready for deployment right out of the box. Greater brand awareness with captive portal Guest web visitors are not only able to connect using an email address, Facebook or Google account. Captive portal enables increased brand awareness, the placement of advertisements and promotions, and the collection of user information to gain a better understanding of customer behaviour.
The ASUS ZenWiFi BT8 is a versatile networking solution designed to deliver high-speed Internet with its advanced Wi-Fi system capabilities. Equipped with seven internal antennas, this device ensures optimal coverage and minimizes dead zones in your home or office. With support for both wired and wireless connections, it integrates into various environments while providing robust performance with speeds up to 10 Gigabit Ethernet and 2.5 Gigabit Ethernet.Featuring security protocols such as WPA3-Personal and AES encryption, the ASUS ZenWiFi BT8 prioritizes your online safety. Enhanced with functionalities like VPN support and parental control, this router offers a comprehensive and secure browsing experience. The device can be managed effortlessly through the ASUS Router App, enabling users to monitor their Internet usage, configure settings, and apply traffic monitoring and bandwidth management effectively.
6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
EC25-EU&KNe | LAN \ WAN ports 1 | PoE ports 1 | Memory (RAM) 256MB | Flash memory capacity 512MB | Included Accessories K-91 Fastening set5 V 0.8 A power adapter | Operating temperature range -40°C to 70°C
ZTE G51F 5G ODU MC7510 Router Expand your connection with a strong signal and wide coverage. Ultra-fast 5G-A network with Sub-6 GHz NSA&SA dual-mode low-band 4MIMO design up to 3.6 Gbps Dual-band Wi-Fi 7 Ultra-wide 110-degree coverage 13 dBi AI ultra-high-gain antenna Algorithm 5.0 2.5G POE adapter Compact design, easy installation Extremely compact design IP65 protection against water and dust Quick installation on a window, wall, pole, or desk Ultra-thin power cable with 1.0 mm window entry
Teltonika Altos is a 5G Wi-Fi 7 router, engineered to deliver ultra-fast and future-ready mobile broadband for modern homes, small offices, and other Fixed Wireless Access (FWA) deployments. It provides reliable high-speed 5G connectivity where traditional fibre is unavailable or too costly. Running on the feature-rich Teltonika RutOS and fully managed by the Remote Management System (RMS), Altos balances next-generation speed and enterprise-grade security in an intuitive setup.
