SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
5-Port GbE PoE Web Managed SwitchThe GS1200 Series Web Managed Gigabit Switch provides simple control for better management. Unlike other advanced but complex managed switches, this series of switch is suitable for most users and provides an affordable solution with essential features including VLAN, QoS, IGMP snooping, link aggregation, and port mirroring. These functions can be completed in just a few simple clicks through an easy, friendly, and intuitive Web GUI.There are five models for GS1200 series, coming with non-PoE (GS1200-5v3/8v3) to connect to devices including PCs, NAS, and print servers, PoE capable (GS1200-5HPv3/8HPv3) to provide power to IP CAM, wall mounted AP and PoE standard devices, and fiber uplink (GS1200-10v3) for easily deployment in hallways to connect network devices on the same floor and link them back to the core network.
Wi-Fi 5 ACCESS POINT Equipped with dual-band technology, fast roaming, and an RJ45 port with PoE-in functionality, the Teltonika Networks TAP200 is a Wi-Fi 5 wireless access point designed to enhance Wi-Fi coverage in medium-density spaces where high network performance is essential. The TAP200 features an integrated mounting bracket for quick and easy installation, and a sleek design to seamlessly blend into retail, enterprise, or any other environment.Wi-Fi 5 Wave-2 802.11 b/g/n/ac Dual Band Wi-Fi RJ45 & POE-IN Supporting speeds of up to 1000 Mbps and PoE-in functionality RESILIENT & EASY TO INSTALL UV-stabilised housing for lasting colour with a mounting bracket for quick setup RMS MANAGEMENT Free RMS Management access for 24 months
The Ubiquiti UniFi Cloud Gateway Industrial (UCG-Industrial) is a security and cloud gateway specifically developed for industrial applications. Its robust construction and reliable performance make it ideal for demanding environments where stability, centralized management and resiliency are required. As a central network instance, the UCG-Industrial takes over important functions such as routing, firewall protection and network management within a UniFi environment. At the same time, it serves as a powerful management platform for access points, switches and other UniFi devices and supports the creation of a clear, scalable network structure. Gateway type Color black Manufacturer no. UCG Industrial Wall mounting design Area of application: business Network RJ-45 connections Fiber optic connections Connections speed WAN / Internet RJ-45 WAN connections WLAN standards Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 7 - (2.4 GHz, 5 GHz) WLAN transfer rate 688 MBit/s (WLAN 2.4 GHz), 4300 MBit/s (WLAN 5 GHz) WiFi coverage up to Hardware CPU Quad-core ARM® Cortex®-A73 2.2 GHz Hardware RAM 3GB Firewall IPS throughput 5000 MBit/s Power supply Power supply connection, power consumption operation: 28 W, PoE total budget: 270 W Feature Managed UniFi Devices: 50 - Cameras up to: 15x HD, 8x 2K, 5x 4K - WAN: 1x 10G SFP+, 1x 10 GbE RJ45, 1x 2.5 GbE RJ45 || Stateful Firewall, Application-Aware Layer 7 Firewall, DPI & Traffic Identification, Zone-Based Firewall Advanced Filtering (Regions, Domains, Apps), Content Filtering, Intrusion Prevention (IPS/IDS), Ad Blocking Further information MAC Address Table: 4000 Note Mobile App: UniFi iOS™: Version 10.32.0+, UniFi Android™: Version 10.35.0+ Dimensions Width: 307.9 mm x Height: 203.5 mm x Depth/Length: 43.7 mm Weight 2.4kg
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 2x10/100M, 64, 128-bit WEP, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Antenna Gain 5 dB, Number of antennas 2, Wireless Frequency Range 2.412~2.472GHz, Windows 10, Windows 8, Windows 7, Linux, MacOS, Windows XP, Windows Vista, Activity, Link, Power, Included Accessories Power Adapter, RJ-45 Ethernet Cable, Quick Installation Guide, Power supply requirements 5VDC / 0.6A, Dimensions 154 x 114 x 36mm
Schneller WLAN-Repeater, bis zu 2x 2.400 MBit/s (5 GHz) und 1x 1.200 Mbit/s (2,4 GHz), Mesh-fähig, 802.11a/g/n/ac/ax, 1x 2,5-GBit-LAN und 1x Gbit-LAN, WPA2 und WPS
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
BAT120 on esimene tööstuslik UPS (katkematu toiteallikas) Teltonika Networks'i tootevalikus. BAT120 on varustatud kahe 4-poolse alalisvoolupordiga toite sisse- ja väljundi jaoks. Sisendpinge ulatub 9V kuni 30V ja väljund 12VDC, kui see töötab akupealt. Kuigi kaasaegne tehnoloogia võimaldab meil teha imelisi asju, on see siiski tundlikum kui paljud arvavad. Seadmed sõltuvad stabiilsest ja pidevast energiavarustusest, et õigesti toimida. Kuna paljud süsteemid võivad elektrivoolu kõikumise tõttu katkeda, pakub Teltonika Networks teile võimalust pakkuda stabiilset energiat ühilduvatele* seadmetele meie uusima lisandiga. Ühilduvate seadmete hulka kuuluvad: RUT2xx, RUT9xx, RUT3xx, RUTXxx, TRB1xx, TRB2xx, TSW110 ja TCR100. Teltonika Networks toob turule BAT120, katkematu toiteallika lisaseadme! See uus täiendus meie tooteportfelli pakub ühilduvatele toodetele püsivat elektrivoolu, tagades teie IoT-lahenduse pideva ühenduvuse. Teltonika Networks'i tooted taaskäivituvad pinge kõikumise korral. See turvafunktsioon võib aga häirida pidevat andmevoolu, kui vajate pidevat ühenduvust ilma vähimagi katkestuseta. Kui tekib ootamatu elektrikatkestus, võib BAT120 toita ühendatud Teltonika Networks'i seadmeid kuni 6 tundi, vältides ühenduse katkemist ja pakkudes piisavalt aega esmase elektrivõrgu taastamiseks. Seda võimaldavad kaks 18650 Li-Ion akut. Samuti saate seadistada meie ühilduvaid seadmeid saatma SMS-i või e-posti hoiatuse, kui tekib voolukatkestus, mis võimaldab teil häirega kursis olla ja selle võimalikult kiiresti kõrvaldada. Kasvavad linnad toovad rohkem tehnoloogiat ühte kohta, eriti arengumaades. Elektrivõrgu laienemine ei suuda nõudlusega sammu pidada. Elektrijaamu, mis toodavad energiat taastuvatest allikatest, nagu tuul ja päike, ei saa pidevalt optimaalselt ära kasutada, tekitades ebaühtlase elektrivoolu. Ka elektrijaama ja lõpptarbija vaheline kaugus on stabiilse energiavarustuse seisukohalt oluline. Lõpuks kahjustab elektrivõrgu ebaseaduslik ühendamine oluliselt selle üldist stabiilsust, mistõttu tuleb seda pidevalt jälgida, kuid see ei ole selliste tegevuste eest täiesti ohutu.
RB5009UPr+S+OUT An outdoor version of our best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure.
OC400 Omada Hardware Controller Centralized Management: for up to 1,000 Omada access points, 200 Omada switches, and 100 Omada routers.* 2× 10GE SFP+ Slots, 4× GE RJ45 Ports, and 2× USB 3.0 Ports. Redundant power supplies offer a reliable networking architecture. Free cloud access with the Omada app or Web UI from anywhere, anytime. On-premises manages to locally monitor and manage devices. The easy-to-use dashboard and real-time network topology make network monitoring easy. Batch and multi-site management benefit network maintenance.
Välitingimustes kasutataval OTD140 ruuteril on spetsiaalne ja vastupidav IP55 plastmassist korpus ning integreeritud paigaldusklamber, mis muudab selle 4G välijuhtimismooduli kergesti kasutatavaks ja vastupidavaks välitingimustes. Lisaks sellele on see välitingimustes kasutatav ruuter varustatud LTE Cat 4 ühenduvuse, ühilduvuse RMSiga kaugjuhtimise võimaluste jaoks ja kahe PoE-in/out Ethernet-portiga.IP55 PIONEERIP55 vastupidavus välitingimustes kasutamiseksÜHENDUS4G LTE (Cat 4), 3G, 2GAUTO FAILOVERKaks SIM-kaarti automaatse ümberlülitusega ja muud ümberlülitamisstsenaariumidPOE-IN/OUT1 x PoE-in ja 1 x PoE-out portStandard toode sisaldab:OTD140 ruuterKinnitusQSG (Kiirjuhend)Pakendikarp
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-30W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-30W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
Discover the reliability and performance of the Ubiquiti UniFi network cable, a vital component for any modern network setup. This CAT 6 patch cable features male RJ-45 connectors on both ends, ensuring a secure and efficient connection between your devices. With compliance to TIA/EIA-568-B.2 standards, it delivers dependable network performance. Additionally, its VW-1 (UL1581) certification attests to its safety and durability, making it an ideal choice for indoor environments. Whether for home or office use, this network cable is designed to meet the demands of your networking needs, providing a stable and high-speed data transmission solution.
Introducing the NETGEAR GS308EPP PoE+ Gigabit Ethernet Plus Switch with 8 ports PoE+ and a total PoE budget of 124W to power PoE applications such as VoIP phones, IP cameras for surveillance, wireless access points and more.GS308EP includes basic and advanced network management features to help optimize the performance of business networks. Management is also flexible via the easy-to-use web browser-based management GUI. Basic management features include VLANs, QoS, and IGMP Snooping, and advanced management features include advanced per port PoE control and uninterrupted PoE.Use VLANs to separate traffic for better speed and improved bandwidth, QoS to prioritize traffic for better delivery quality and IGMP snooping for optimized multicast performance at Layer 2 which is especially useful for bandwidth-intensive IP multicast applications such as IPTV. Advanced per port PoE controls manage the power of the PoE connected devices by enabling and disabling PoE power per port, PoE prioritization, PoE power limit per port and more. Lastly, unique to NETGEAR, it has uninterrupted PoE. Keep PoE power on even when the switch is updating firmware or performing a software reboot.
