QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design
AX3000 Wall Plate WiFi 6 Access Point Blazing-Fast AX3000 WiFi 6 Speeds:: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† Higher Network Efficiency: Deliver data to more devices at the same time with less lag.‡ Complete In-Room WiFi Coverage: Guaranteed strong signals and corner-to-corner WiFi coverage. Gigabit Port: Connect wired devices with one downlink gigabit port. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Secure Guest Network: Implement multiple authentication options (SMS/Facebook Wi-Fi/ Voucher) packed with high-quality wireless security technologies.§ Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU standard junction box, and 802.3af/at PoE support. AX3000 Wall Plate WiFi 6 Access Point Blazing-Fast AX3000 WiFi 6 Speeds:: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† Higher Network Efficiency: Deliver data to more devices at the same time with less lag.‡ Complete In-Room WiFi Coverage: Guaranteed strong signals and corner-to-corner WiFi coverage. Gigabit Port: Connect wired devices with one downlink gigabit port. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Secure Guest Network: Implement multiple authentication options (SMS/Facebook Wi-Fi/ Voucher) packed with high-quality wireless security technologies.§ Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU standard junction box, and 802.3af/at PoE support.
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
RUTM09 on traadita 4G LTE ruuter, mis on välja töötatud suure mobiilsidekiirusega rakenduste jaoks. See on varustatud Cat 6 ja kahe SIM-kaardi võimekusega, mis võimaldab seadmel toetada kuni 300 Mbit/s kiirust ja selliseid funktsioone nagu operaatorite koondamine ja tõrkeülesanne. Lisaks on RUTM09-l neli Gigabit RJ45 porti ja GNSS, mis võimaldab GPS-positsioneerimist täpse asukoha tuvastamiseks. Need omadused teevad RUTM09-st erakordse valiku, et tagada katkestusteta võrguühendus mobiilsete või jälgimist vajavate rakenduste jaoks.ÜHENDUSKaks SIM-kaarti, 4G LTE (Cat 6) kiirusega kuni 300 Mbit/s.TULEMUSLIKKUSELE SUUNATUDVarustatud katkestusteta, suure andmeside läbilaskevõimega viperuse ja operaatoragregeerimisega. INTERFACES4 x Gigabit RJ45 porti, USB ja kuni 128 tag/port-põhist VLANiGNSSAsukohateenused ja ajasünkroniseerimine andmete täpseks lugemiseksSTANDARDPAKETT*Marsruuter RUTM0918 W TOITEALLIKAS2x mobiilsed antennid (pöörlevad, SMA-poolsed)1x GNSS-antenn (kleepuv, SMA isane, 3 m pikkune kaabel)Ethernet-kaabel (1,5 m)SIM-adapteri komplektQSG (kiirkäsiraamat)Pakendikarp
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
RB4011 seeria – hämmastavalt võimsad ruuterid kümne Gigabit pordi, SFP+ 10Gbps liidese ja IPsec riistvarakiirendusega suurepärase hinna eest! RB4011 kasutab neljatuumalist Cortex A15 protsessorit, sama mis meie kandjaklassi RB1100AHx4 üksus. Seade on varustatud 1 GB muutmäluga, suudab pakkuda PoE väljundit pordis nr 10 ning komplektis on kompaktne ja professionaalse välimusega mattmustas metallist korpus. RB4011iGS+5HacQ2HnD-IN (WiFi mudel) on kaheribaline neljaahelaline seade, mille toetatud andmeedastuskiirus on kuni 1733 Mbps sagedusel 5 GHz. Pärandseadmete jaoks on seadmel ka miniPCI-e pessa paigaldatud kaheahelaline 2 GHz traadita kaart.
The Ubiquiti UniFi CAT 6 Network Cable is designed to provide reliable connectivity indoors with its build quality. This patch cable features molded connectors that enhance durability, ensuring consistent performance with every use. Equipped with Etherlighting technology, this cable supports 2.5 Gigabit Ethernet speeds, making it suitable for applications that require high data transfer rates. The translucent connector boots add a touch to the cable design while maintaining functionality. With PoE++ readiness, this cable is suitable for powering devices over the network without the need for additional power sources.
MT110 4G LTE Mobile Wi-Fi - More Connections: Share with friends internet access for up to 10 devices simultaneously - Long usage: 2200 mAh battery for 10 hours - 4G Network: Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions, and enjoy download speeds of up to 150 Mbps - 150 Mbps WiFi: Fast WiFi speeds up to 150 Mbps to share your network - SIM Card Plug and Play: Go anywhere and connect everywhere easily - Easy App Control: Management with the MERCUSYS App
Archer TBE400E BE6500 Wi-Fi 7 Bluetooth 5.4 PCIe Adapter Unparalleled Tri-Band Speed - Boost your overall speeds up to 2882 Mbps (6 GHz) + 2882 Mbps (5 GHz) + 688 Mbps (2.4 GHz) WiFi 7 Standard - Unleash the full potential of the 6 GHz band to double the bandwidth of the last generation Reliable Bluetooth 5.4 - Security and reliability improvement than last-gen high-speed Bluetooth 5.3 Wider Signal Coverage - Two powerful signal-boosting high-gain antennas greatly extend existing Wi-Fi coverage, offering a fast, smooth online experience from farther away Cutting Edge WPA3 - Protect your network with the latest WPA3 security protocol so your information transmitted via the wireless adapter is secure from hackers Minimized Lag for your PC - OFDMA and MU-MIMO technology reduces lag so you can enjoy real-time gaming or an immersive VR experience on even busy networks Low-Profile Brackets - Both a standard and low-profile bracket for mini tower computer cases are provided Supported Operating System - Windows 11(64-bit) only WiFi 7, WiFi Like Never BeforeWiFi 7 has arrived with jam-dropping performance - offering accelerated throughput, lower latency, stronger anti-jamming and higher efficiency. Join the league of pros and experiance the sheer performance of the next generation WiFi. Superior WiFi ReceptionArcher TBE400E takes your PCs Wi-Fi reception to the next level with the revolutionary combination of OFDMA and MU-MIMO. This ensures the efficiency of your PCs Wi-Fi connection by allowing more devices to communicate with your router simultaneously, rather than waiting in turn for data. Reliable Bluetooth 5.4Building on its predecessors high-speed and wide-range capabilities, Bluetooth 5.4 offers improved reliability and security. Enjoy seamless interoperability with game controllers, headphones, keyboards, and more. High-Gain Antennas for Broader CoverageTwo powerful signal-boosting high-gain antennas greatly extend existing Wi-Fi coverage, offering a fast, smooth online experience from farther away. Advanced SecurityThe latest Wi-Fi security protocol, WPA3, brings new capabilities to improve cybersecurity. More secure encryption in Wi-Fi password safety and enhanced protection against brute-force attacks combine to safeguard your home Wi-Fi. Easy SetupSimple software installation via the intuitive Utility disk Low-Profile BracketIn addition to the standard bracket, a low-profile bracket is also provided for mini tower computer cases Operating SystemSupports Windows 11 (64-bit)
Router LT400 Outdoor LTE FDD/TDD Cat 4 N300 Wi-Fi 1 x 10/100Mbps WAN/LAN Nano SIM Slot 24V Passive PoE 2 x Internal WiFi Antennas + 2 x Detachable 4G Antennas VPN & DDNS IP65 WaterProof Turn Everywhere 4G into N300 Wi-FiWith 4G Cat.4 standards, LT400 Outdoor communicates with a 4G tower with speeds of up to 150 Mbps download and 50 Mbps upload. It features a N300 Wi-Fi, providing reliable network for web browsing,video streaming, surveilance, and POS services.Boosted Wi-Fi Coverage with BeamformingTested Wi-Fi coverage performance in four dierent scenarios, achieved by Beamforming technology and two built-in antennas. If your space is too large for one Cudy 4G Outdoor Router to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.Insert a SIM, Enjoy Wi-FiInstall Wi-Fi anywhere is as easy as plugging a SIM card and booting it up with the PoE adapter. One PoE Adapter is included in the box.Pull Network to 100 m AwayPlug your Ethernet cable into the PoE adapter/switch to get up to 100 m of wired network reach. The extra cable is not included in the box.Install an AP for Indoor Wi-FiConnect an AP to the PoE adapter to equip your cafe, home, or oce with a better Wi-Fi signal. AP needs to bepurchased separately.Install Extension AntennasThe default 4G antennas are as sensitive as a standard phone's antennas. You can still replace them with customized ones via the SMA connectors.
Input connector4-way open wireOutput connector4-pin, 3 mm pitchCable4 x 0.5 mm² (20 AWG)Total Length1500 mmRoHS✓Maximum Voltage300 VMax UL-listed Voltage300 VMax DC Current Per Contact4.5 ATemperature Range-20 °C to 80 °CCable Material Isolation Voltage kV1.5 kV
The UniFi Access Reader Lite has been designed for convenient use and secure access. The PoE-powered reader is easy to install and supports the latest NFC security standards, including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secure with an NFC card or with mobile app.
Zyxel GS-108B v5 ? 8-Port Gigabit Switch 8-port Gigabit switch with plug & play deployment QoS ports ensure stable traffic prioritization Fanless design for silent operation Durable metal housing with wall-mount option Energy-saving operation with IEEE 802.3az support Fast and easy networking for small businesses The Zyxel GS-108B v5 is an 8-port unmanaged Gigabit switch that seamlessly connects workstations, IP phones, storage, and other network devices. With plug & play functionality, it requires no configuration?just connect your devices and enjoy instant networking. QoS ports for prioritized and smooth data flow Four QoS ports (ports 5?8) on the GS-108B v5 are designed to handle critical traffic. Ports 5 and 6 offer medium priority, while ports 7 and 8 provide high-priority performance for demanding applications such as voice over IP. Silent and reliable build The passively cooled, fanless design ensures completely silent operation, making it perfect for noise-sensitive environments. Its sturdy metal housing improves heat dissipation and durability. The switch supports both desktop and wall-mounted installation. Smart energy efficiency built in Supporting IEEE 802.3az Energy Efficient Ethernet, the GS-108B v5 adjusts power consumption based on traffic levels. This enables significant energy savings without compromising network performance. 8 x 10/100/1000 Mbps RJ-45 ports QoS ports: 2 x medium (ports 5?6), 2 x high (ports 7?8) Switching capacity: 16 Gbps Forwarding rate: 11.5 Mpps MAC address table: 4K Packet buffer: 192 KB Jumbo frame support: up to 9 KB Fanless, passively cooled design Power consumption: max. 4.82 W Metal housing, desktop or wall-mountable Compliant with IEEE 802.3az Energy Efficient Ethernet Dimensions: 126 x 51.8 x 24 mm Weight: 0.176 kg
