Archer C6 V4 AC1200 Wireless MU-MIMO Gigabit Router - AC1200 Dual-Band Wi-Fi – 867 Mbps at 5 GHz and 400 Mbps at 2.4 GHz band - MU-MIMO Technology – Simultaneously transfers data to multiple devices for 2× faster performance - Boosted Coverage – Four external antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals - Access Point Mode –Supports AP Mode to transform your wired connection into the wireless network - Easy Setup – Set up your Wi-Fi in minutes with TP-Link Tether app. Archer C6 V4 Wireless Router, Available bandwidth 1200 Mbps Data transmission speed 867 Mbps, Wi-Fi 5 1 WAN, 4x10/100/1000M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Omni-Directional, Number of antennas 4 Wireless Frequency Range 2.4 and 5 GHz, Included Accessories Power Adapter;RJ45 Ethernet Cable;Quick Installation Guide Power supply requirements 12 V - 1 A, Dimensions 215 × 117 × 32 mm
Välitingimustes kasutataval OTD140 ruuteril on spetsiaalne ja vastupidav IP55 plastmassist korpus ning integreeritud paigaldusklamber, mis muudab selle 4G välijuhtimismooduli kergesti kasutatavaks ja vastupidavaks välitingimustes. Lisaks sellele on see välitingimustes kasutatav ruuter varustatud LTE Cat 4 ühenduvuse, ühilduvuse RMSiga kaugjuhtimise võimaluste jaoks ja kahe PoE-in/out Ethernet-portiga.IP55 PIONEERIP55 vastupidavus välitingimustes kasutamiseksÜHENDUS4G LTE (Cat 4), 3G, 2GAUTO FAILOVERKaks SIM-kaarti automaatse ümberlülitusega ja muud ümberlülitamisstsenaariumidPOE-IN/OUT1 x PoE-in ja 1 x PoE-out portStandard toode sisaldab:OTD140 ruuterKinnitusQSG (Kiirjuhend)Pakendikarp
RUTM11 on Teltonika tööstuslik LTE-ruuter, mis on mõeldud rakenduste jaoks, mis nõuavad suurt andmeedastust ja töökindlat võrguühendust, mis ei talu suuri viivitusi ja katkestusi. RUTM11 on varustatud nelja Gigabit RJ45 pordiga, kahesagedusliku Wi-Fi ja kahe SIM-kaardi võimekusega, mis võimaldab mitut varusstsenaariumi. Sellel ruuteril on LTE Cat 6, mis võimaldab saavutada kuni 300 Mbit/s mobiilside kiirust, mida saab suurendada operaatorite koondamise abil. ÜHENDUS Dual SIM, 4G LTE (Cat 6) kiirusega kuni 300Mbps INTERFACES 4 x Gigabit RJ45 porti, USB ja kuni 128 tag/port-põhist VLANi. GNSS Asukohateenused ja ajasünkroniseerimine andmete täpseks lugemiseks WI-FI 5 Kahe sagedusalaga Wi-Fi koos võrgusilma ja kiire rändluse funktsioonidega STANDARDPAKETT*Ruuter RUTM1118 W TOITEALLIKAS2x mobiilsed antennid (pöörlevad, SMA isendiga)2x Wi-Fi antennid (pööratavad, RP-SMA isased)1x GNSS antenn (kleepuv, SMA isane, 3 m pikkune kaabel)Ethernet-kaabel (1,5 m)SIM-adapteri komplektQSG (kiirkäsiraamat)Pakendikarp
Type Adapter | Data transmission speed 2402 Mbps | Wi-Fi 6 | USB 3.0 | Antenna Type Omni-Directional | Wireless Transmit Power 15 dBm | Wireless Frequency Range 2.4 GHz and 5GHz
The Aruba CX 6000 Switch Series is modern family of entry level access switches ideal for branch offices, midsize businesses, and small enterprises. Designed for reliable, simple, and security-enhanced access, the Aruba CX 6000 series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.The Aruba CX 6000 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully-managed series has convenient built-in uplinks with up to 370W of Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact model is ideal for use in quiet, small work spaces. The Aruba CX 6000 series is easy to deploy and use with flexible management choices, allowing the best fit for your business and network environment.
16x10Base-T / 100Base-TX / 1000Base-T | Switching capacity 32 Gbps | Switching method Store-and-forward | Dimensions 294 x 140 x 44 mm | Unit Net Weight 1.4 kg
i-tec C31NANOLANPD100. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Ethernet LAN-i andmeedastuskiirused: 100,1000 Mbit/s. Toote värv: Hall, Ühilduvad ...
The TP-Link Omada SX3032F V1 is a versatile networking switch designed to accommodate a variety of settings with its powerful performance and robust features. With a switching capacity of 640 Gbps and a packet forwarding rate of 476.16 Mpps, this switch ensures efficient data handling necessary for modern demands. Its capacity includes support for 1000 static routes, 4000 IGMP groups, and 256 MAC addresses per port, making it ideal for accommodating high-traffic environments. The switch is equipped with 32 ports supporting 10GBase-X, providing the reliability needed for seamless connections. Operational flexibility is enhanced through its extensive range of networking features, including VLAN support, QoS for better bandwidth management, and advanced security options like RADIUS and TACACS+ authentication methods. Designed for easy customization and management, the SX3032F offers remote management options through various protocols, ensuring administrators can configure and monitor the network with ease. Its durable metal housing and included rack mounting kit make it suitable for a range of installations, from data centers to enterprise networks.
The Mercusys ME60X V1 Wi-Fi range extender is a powerful addition to any home network, designed to eliminate dead zones and boost your Wi-Fi coverage. With Wi-Fi 6 technology, it offers increased capacity and efficiency, supporting your devices' need for speed and reliability. The dual-band functionality provides a total data transfer rate of up to 1500 Mbps, ensuring smooth streaming, gaming, and downloading throughout your home.This device not only extends your Wi-Fi range but also optimizes your network's performance with features like Adaptive Path Selection and High Speed Mode. The former ensures your device always has the fastest possible connection to your router, while the latter maximizes overall network efficiency. Security is also a priority, with WPA3 encryption offering robust protection against intruders. Additionally, the setup is a breeze with the One-Touch Connect feature, making the Mercusys ME60X V1 an essential upgrade for any modern household looking to enhance their online experience.
A compact outdoor Wi-Fi 6 CPE with a powerful 16 dBi antenna, AP mode, and multiple mounting options — perfect for masts, poles, or rooftop deployments. Meet the SXTsq 5 ax — our first Wi-Fi 6 outdoor CPE, combining the best wireless technology with our trusted, compact SXTsq form factor. Despite the upgrade to Wi-Fi 6 and a modern ARM-based dual- core CPU, this unit keeps the same price point as our previous Wi-Fi 5 model — making it one of the best-value weatherproof CPEs on the market. The enclosure can withstand all sorts of unpredictable weather hazards, and it features slots for directly attaching a hose clamp in three different mounting positions, including support for horizontal railings — ideal for masts and poles in rooftop or tower deployments. Field-tested up to 3 km in high-interference, urban scenarios. Designed with the same trusted long-range architecture as previous SXT models — capable of 10+ km links in line-of-sight deployments. With RouterOS license level 4, the SXTsq 5 ax isn’t just a client — it can also be configured as a powerful access point, giving you more flexibility in planning your wireless infrastructure. And thanks to its compact square shape, it fits neatly into even the most space- sensitive deployments.
SAVIO AK-69 USB-C 3.1 Gen 1- SATA 2,5" Adapter USB-C adapter AK-69, is a cable characterized by high quality and reliability. You can transfer data, charge devices, and connect accessories. Thanks to the Plug&Play function, the electronic accessory does not require installing additional drivers. Moreover, it is compatible with all Windows, macOS, and Linux operating systems. Practicality The AK-69 adapter from Savio, thanks to its USB-C end, is used to transfer data from one device or drive to another. It is especially useful in a situation where you have an older type of SSD (SATA) drive and you want to plug it into a new laptop, to rip the files you need. AK-69 can be used as an adapter, allowing you to create a 2.5" drive into an external data storage device. Fast data transmission The AK-69 offers high-speed data transmission of up to 5 Gbps over the SATA connector. This is a serial interface used in computers for communication between the processor and storage and optical drives. The speed offered is perfect for fast, efficient, and hassle-free file exchange. Practicality and convenience Savio's adapter features convenience in use, thanks to its 25 cm long cable. It is long enough to provide flexibility of use but short enough to be easy to carry and not get tangled. Supporting 2.5" HDDs and SSDs with the USB-C adapter involves connecting the drives to a computer or other device with a USB-C port. This is done without having to place them internally in the enclosure. Technical specifications: Data transmission: SATA III up to 5 Gbps and SATA II up to 3 Gbps Hard drive support: up to 10 TB Supported drives: 2.5" Cable length: 25 cm. Plug and Play: Yes, no additional drivers are required Dimensions: 45 × 42 × 11.5 mm Weight: 19 g
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Long-range outdoor CPEs with modern Wi-Fi 6 performance, rugged design, and unbeatable pricing. Available in two models (24.5 or 27 dBi), they’re ideal for point-to-point links over great distances. This is the 24.5 dBi version. Need a fast, stable connection across large distances? Whether you’re bridging two buildings, connecting a remote site, or sharing your internet with nearby infrastructure — the new LHG Wi-Fi 6 series is built for the challenge. And here’s the best part: we’ve kept the same pricing as the previous generation. High performance, long range, and Wi-Fi 6 — all without breaking the budget. The 802.11ax standard brings crucial improvements for long-distance wireless links — including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking. Order yours today — and be ready too! LHG 5 ax is compact, long-range CPE with a 24.5 dBi antenna. Perfect for links up to 20 km in most scenarios. Check related devices below for the XL version if you need a longer distance!
PoE ports 8 | PoE power budget 60 Watts | Operating temperature range -10 °C ... 55 °C | Dimensions 184.6 x 103.3 x 27.0 mm | Product Net Weight 0.36 kgGarantii: 36 kuud
netPower Lite 8P Low-cost. Tough. And always ON! Compact PoE switch with built-in UPS and smart battery charger – because your CCTV cameras and access points deserve true off-the-grid resilience.
Original part number CS22U-A7 Product name ATEN CS22U 2-Port USB KVM Switch, Remote port selector, 0.9m cables Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 2048 x 1536 pixels Active port selection pushbutton Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.8m for PC with USB, USB, D-Sub-15 conectors - 2pcs Width 82 mm Height 25 mm Depth 77 mm Net weight 310 g Additional information integrated cablesNo power supply neededsupport for multifunction keybords and mousessupport for Win, MAC, Linux and Sun Datasheet Datasheet More info More info
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
5-Port 10/100Mbps Desktop Switch Five 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supportedEasily wired network expansionCompact design for flexible arrangementPlug and play setup, no configuration required
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.The enclosure includes slots for directly attaching a hose clamp mount in three different mounting places, with ability to be mounted on horizontal railings. The device includes one 10/100 Mbit Ethernet port. There is also an easily accessilble grounding connection to protect it against lightning.Included parts
