The TwistPort™ Adaptor for airFiber® LTU / PrismStation™ 5AC / IsoStation™ 5AC / IsoStation™ M5 makes the radios compatible with all TwistPort™ Antennas. TwistPort™ Adaptors are equipped with our original quick-locking waveguide port. Connecting and disconnecting the IsoStation™ radio series from the TwistPort™ Adaptor is very simple and requires no tools. Antenna Connection TwistPort - Quick Locking Waveguide PortMaterials Insert - Aluminium Alloy Adaptor - UV stabilized and weather resistant ABS plasticFlame Rating UL 94 HBTemperature -40°C to +60°C (-40°F to +140°F)Wind Survival 160 km/hWeight: 0.09 Kg /0.2 lbs – single unitSingle Unit Retail Box: 10.9 × 9.8 × 5.4 cm
ADDER C-USB-LAN is a high performance USB extender that enables you to locate your critical computing hardware away from the user work station whilst maintaining the original user desktop experience. It can transmit USB2.0 over a single CATx cable or via an 1GbE IP network: Transparent USB2.0 operation 100m extension distance Switchable and routable USB2.0 Hi-speed for mass storage devices plus: USB2.0 (low and full speed) for keyboard, mouse, tablet and touch screen Supports USB3.0 controllers Isochronous support for audio devices and web cams Plug and play Product Codes C-USB-LAN-P-XX; C-USB-LAN-R-XX; C-USB-LAN-T USB 2.0 Enables connection of any USB human interface device - from mice and keyboards through to touch screens, graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can also be used. Transparent operation Once connected, operation is totally transparent to the host system, the USB peripheral(s) and you, the user. There are no drivers to install and your USB devices work precisely as they did before; the only difference is that they are now up to 100 meters away from the host. There is no need for drivers or software to be installed. Plug and Play Adder C-USB-LAN extenders are delivered in a zero config state so you can plug the units in and start working with them straight away. When supplied as pairs, they are already synchronized, so they will locate each other automatically over your network. Integrated A.I.M. control The C-USB-LAN can be controlled and switched via the AdderLink Infinity Manager (A.I.M.), or it can operate separately, as a point to point USB extender using a single length of CATx cable. API An API is available, supporting all functionality to which authorized 3rd party control systems can interface. Support for audio devices With Isochronous support the C-USB-LAN will work with USB microphones and headsets as well as web cams
Adder SFP-SM-LC is a Single-mode Fiber SFP module with LC connectors for use with the AdderLink INFINITY series. SFP-SM-LC provides 4.25Gbps data rate up to 10KM away. AdderLink INFINITY ALIF 1002 and all ALIF Dual variants provide a choice of link connections. Each supports copper-based Gigabit Ethernet (1000Base-T) as well as Fiber Channel over Ethernet (FCoE). ALIF (1002) and ALIF Dual units provide a single system port (CATx) as standard on the right side of the front panel. An additional SFP cage port, located just to the left, allows simple plug-in transceivers suitable for your application; Optional Fiber SFP modules provide a 4.25Gbps rate selectable with LC type connectors suitable for up to 500 Meters (Multi-mode) or 10KM (Single-mode), while the Gigabyte Ethernet CATx SFP module extends up to, but is not limited to, a 100 meter cable length. ALIF Dual units additionally allow for the dual network interface ports to be used in parallel ('Teaming Operation') to produce up to 2-Gigabits per second Ethernet connection speeds with the added benefit of link redundancy that can maintain operation in the event of a failed connection. Teaming offers immediate speed improvements in a one-to-one arrangement as well as in multicast installations.
Lihtne seadistamine N150: 150Mbps WiFi N Bluetooth® 4.0 klassi 1 raadio Toetab kuni WPA2 WiFi krüpteerimist Samaaegne Bluetooth ja WiFi ühenduvus Ülimalt kompaktne disain
Adder SFP-MM-LC is a Multi-mode Fiber SFP Transceiver with LC connectors for use with the AdderLink INFINITY series. SFP-MM-LC provides 4.25Gbps data rate up to 500 Meters away. AdderLink INFINITY ALIF 1002 and all ALIF Dual variants provide a choice of link connections. Each supports copper-based Gigabit Ethernet (1000Base-T) as well as Fiber Channel over Ethernet (FCoE). ALIF (1002) and ALIF Dual units provide a single system port (CATx) as standard on the right side of the front panel. An additional SFP cage port, located just to the left, allows simple plug-in transceivers suitable for your application; Optional Fiber SFP modules provide a 4.25Gbps rate selectable with LC type connectors suitable for up to 500 Meters (Multi-mode) or 10KM (Single-mode), while the Gigabyte Ethernet CATx SFP module extends up to, but is not limited to, a 100 meter cable length. ALIF Dual units additionally allow for the dual network interface ports to be used in parallel ('Teaming Operation') to produce up to 2-Gigabits per second Ethernet connection speeds with the added benefit of link redundancy that can maintain operation in the event of a failed connection. Teaming offers immediate speed improvements in a one-to-one arrangement as well as in multicast installations.
8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports 36-watt output per PoE+ port in high-power mode Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring Supports MXstudio for easy, visualized industrial network management V-ON™ ensures millisecond-level multicast data and video network recovery The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of your system and improve the availability of your network backbone. The EDS-G512E Series is designed specifically for communication demanding applications, such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction. Additional Features and Benefits Command line interface (CLI) for quickly configuring major managed functions Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling) DHCP Option 82 for IP address assignment with different policies Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning Supports the ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade Port mirroring for online debugging QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC address to enhance network security SNMPv1/v2c/v3 for different levels of network management RMON for proactive and efficient network monitoring Bandwidth management to prevent unpredictable network status Lock port function for blocking unauthorized access based on MAC address Automatic warning by exception through email and relay output
User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Class I Division 2, ATEX Zone 2 certification Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments Introduction The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly. Daisy-Chained Ethernet I/O Connection This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses. Save Time and Wiring Costs with Peer-to-Peer Communications In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik Series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs. User-Definable Modbus TCP Addressing for Painless Upgrading of Existing Systems For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying initial configurations. Users need to locate each device’s networking details, such as I/O channels or vendor-defined addresses, to enable the initial or start address of a SCADA system or PLC. Devices that support user-definable Modbus TCP addressing offer greater flexibility and easier setup. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs. Push Technology for Events When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.
Features and Benefits PCI Express x1 compliant 921.6 kbps maximum baudrate for super fast data transmission 128-byte FIFO and on-chip H/W, S/W flow control Low profile form factor fits small-sized PCs Drivers provided for a broad selection of operating systems, including the latest Windows and Linux Easy maintenance with on-board LEDs and management software Overview The CP-104EL-A is a smart, 4-port PCI Express board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even Unix. In addition, each of the board’s 4 RS-232 serial ports supports a super fast 921.6 kbps baudrate. The CP-104EL-A provides full modem control signals to ensure compatibility with a wide range of serial peripherals, and its PCI Express “x1” classification allows it to be installed in any PCI Express slot. Smaller Form Factor The CP-104EL-A is a low profile board that is compatible with any PCI Express slot. The board requires only a 3.3 VDC power supply, which means that the board fits any host computer, ranging from shoebox to standard-sized PCs. Drivers Provided for Windows, Linux, and Unix Moxa continues to support a wide variety of operating systems, and the CP-104EL-A board is no exception. Reliable Windows COM and Linux/Unix TTY drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration.
