Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
Unifi Switch FlexBuild and expand your network with the UniFi® Switch part of the UniFi Enterprise System. The UniFi Switch model USW-Flex is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports providing 1 PoE input and 4 PoE output links to your devices.The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE USW-Pro-24-PoE and USW-Industrial switches sold separately) as power source USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.Managed and configured by the UniFi Controller or UniFi Mobile app the UniFi Switch Flex offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere. PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installed horizontally or vertically making it ideal for desktop magnetic wall-mount and pole-mount installations. Indoor/Outdoor Design The USW-Flex is designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options the USW-Flex provides both flexibility and durability for environments with extreme temperature variations. Compatible Products The USW-Flex powers a variety of products including the UniFi Video Camera G3 Flex UniFi Video Camera G4 Pro and UniFi AC Mesh AP which use 802.3af PoE. To enable its maximum power budget of 46W the USW-Flex can be powered by the USW-Industrial switch which provides 60W of 802.3bt PoE++. Seamless Integration A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring configuration maps statistics and admin accounts.
MR70X | Available bandwidth 1800 Mbps | Data transmission speed 1200 Mbps | Wi-Fi 6 | 1 WAN | 3x10/100/1000M | Antenna Type Omni-Directional | Antenna Gain 5 dB | Number of antennas 4 | Dimensions 208.8 × 171.6 × 41.7 mm
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
"18-Port Cloud Managed Desktop Switch with 16-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
Cube 60Pro ac A powerful point-to-point 60 GHz 802.11ay CPE for bridging distances up to 2.4 km. Long gone are the days when you had to rely on cables for speed and stability. 60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. Our latest Cube 60Pro product line is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances, stability, speed, and convenience. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. And that’s not all – we have added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Bridging two locations has never been easier! You can get a preconfigured kit of two Cube 60Pro ac devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play! Forget about downtime with the automatic 5 GHz backup connection The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. But it can sometimes struggle during bad weather conditions. That’s why both Cube 60Pro devices feature an automatic 5 GHz failover. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz.
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
Type Adapter | Data transmission speed 2402 Mbps | Wi-Fi 6 | USB 3.0 | Antenna Type Omni-Directional | Wireless Transmit Power 15 dBm | Wireless Frequency Range 2.4 GHz and 5GHz
RUTM09 on traadita 4G LTE ruuter, mis on välja töötatud suure mobiilsidekiirusega rakenduste jaoks. See on varustatud Cat 6 ja kahe SIM-kaardi võimekusega, mis võimaldab seadmel toetada kuni 300 Mbit/s kiirust ja selliseid funktsioone nagu operaatorite koondamine ja tõrkeülesanne. Lisaks on RUTM09-l neli Gigabit RJ45 porti ja GNSS, mis võimaldab GPS-positsioneerimist täpse asukoha tuvastamiseks. Need omadused teevad RUTM09-st erakordse valiku, et tagada katkestusteta võrguühendus mobiilsete või jälgimist vajavate rakenduste jaoks.ÜHENDUSKaks SIM-kaarti, 4G LTE (Cat 6) kiirusega kuni 300 Mbit/s.TULEMUSLIKKUSELE SUUNATUDVarustatud katkestusteta, suure andmeside läbilaskevõimega viperuse ja operaatoragregeerimisega. INTERFACES4 x Gigabit RJ45 porti, USB ja kuni 128 tag/port-põhist VLANiGNSSAsukohateenused ja ajasünkroniseerimine andmete täpseks lugemiseksSTANDARDPAKETT*Marsruuter RUTM0918 W TOITEALLIKAS2x mobiilsed antennid (pöörlevad, SMA-poolsed)1x GNSS-antenn (kleepuv, SMA isane, 3 m pikkune kaabel)Ethernet-kaabel (1,5 m)SIM-adapteri komplektQSG (kiirkäsiraamat)Pakendikarp
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Täiustatud WiFi 6 juurdepääsupunkt kõrge jõudluse ja paindliku paigaldusvõimalusegaSee WiFi 6 juurdepääsupunkt on loodud pakkuma suurepärast traadita ühendust, toetades täiustatud MU-MIMO tehnoloogiat ja mitme kasutaja samaaegset ühendamist. Ideaalne nii ärikeskkondadesse kui ka suure kasutajatihedusega kohtadesse, tagades sujuva ühenduse tänu PoE toitevarustusele ja mitmekülgsetele paigaldusvõimalustele.Mehaanilised spetsifikatsioonid:Mõõdud: Ø197 x 35 mm (Ø7.8 x 1.4") – stiilne ja madala profiiliga disain.Kaal:Ilma kinnitusteta: 580 g (1.3 lb)Kinnitusega: 720 g (1.6 lb)Korpuse materjal: Vastupidav polükarbonaat tagab pikaealisuse.Kinnituse materjal: Roostevaba teras (SUS304) kindla toe jaoks.Ilmastikukindlus: IP54 reiting, sobib varjulisse väliskeskkonda.Riistvara ja ühenduvus:Võrgu liides: (1) Gigabit Ethernet RJ45 port kiirete ühenduste jaoks.Juhtimisliides: Ethernet ja Bluetooth lihtsaks seadistamiseks ja haldamiseks.Toiteviis: PoE (Power over Ethernet).Toiteallikas: Ühilduv UniFi PoE lülitiga või PoE adapteriga (ei kuulu komplekti).Toetatud pingevahemik: 44—57V DC.Maksimaalne energiatarve: 13W.WiFi jõudlus:Maksimaalne edastusvõimsus:2.4 GHz: 22 dBm5 GHz: 26 dBm6 GHz: Ei ole toetatudMIMO:2.4 GHz: 2 x 2 UL MU-MIMO5 GHz: 4 x 4 DL/UL MU-MIMO6 GHz: Ei ole toetatudMaksimaalne andmeedastuskiirus:2.4 GHz: Kuni 573.5 Mbps (BW40)5 GHz: Kuni 4.8 Gbps (BW160)6 GHz: Ei ole toetatudAntenn ja LED indikaatorid:Antennivõimendus:2.4 GHz: 4 dBi5 GHz: 6 dBi6 GHz: Ei ole toetatudLED indikaatorid: Valged/sinised LED-id staatuse näitamiseks.Paigaldus ja töötingimused:Paigaldusvõimalused: Seinakinnituse ja laekinnituse tarvikud on kaasas.Töötemperatuur: -30 kuni 60° C (-22 kuni 140° F).Tööniiskus: 5 kuni 95% mitte-kondenseeriv.Sertifikaadid: CE, FCC, IC sertifitseeritud.Tarkvara ja WiFi standardid:WiFi standardid: 802.11a/b/g/n/ac/ax (WiFi 6), et tagada uusimad traadita tehnoloogiad.Traadita turvalisus: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) turvalisteks ühendusteks.BSSID: Toetab kuni 8 BSSID-d raadio kohta.VLAN tugi: 802.1Q täiustatud võrgu haldamiseks.Täiustatud QoS: Kasutajapõhine kiiruse piiramine liikluse optimeerimiseks.Külalisvõrgu isoleerimine: Toetatud parema võrgu turvalisuse jaoks.Samaaegsed kliendid: Toetab 350+ klienti samaaegselt.Null viivisega DFS: Jah* (toetatud tulevaste püsivara versioonidega).Toetatud andmeedastuskiirused:802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b: 1, 2, 5.5, 11 Mbps802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11n: 6.5 Mbps kuni 600 Mbps (MCS0 - MCS31, HT 20/40)802.11ac: 6.5 Mbps kuni 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)802.11ax (WiFi 6): 7.3 Mbps kuni 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
CS4228-24GT-375 28-Port Cloud Managed Desktop Gigabit Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
Smart L3 Managed Stackable Switches DGS-1520 Series Stacking Physically stacking up to 8 switches for expansion and redundancy. Touchless installation Seamless multi-site deployment with automatic configuration download. Large PoE budget Power over Ethernet (PoE) budget up to 370W allows you to power multiple devices. 10G connections Four 10-gigabit ports for stacking or uplinking. Multi-gigabit PoE ports Four 2.5G PoE ports, ideal for Gigabit Wi-Fi 6 access points. Redundant power An optional redundant power supply ensures uninterrupted operation. Advanced L2 and L3 features Easily adapt to network changes with selectable Q-in-Q, VRRP, RIP and OSPF features. Limited Lifetime Guarantee Register your product to take advantage of Lifetime Limited's lifetime warranty. A new dimension in Managed Smart Switches Expandable network with high-performance 10-gigabit stackable switches to increase productivity and uptime. x8 Eight connected switches form a redundant stack with up to 384 gigabit ports. 188Gbps High throughput data transfer between connected devices at up to 188 Gbps. x4 Four 2.5G PoE ports (PoE models), ideal for Wi-Fi 6 access points. High availability Simplification of management and cabling increases the efficiency and reliability of the network. Physical stacking up to 8 switches with a total bandwidth of 80G. Designed with Wi-Fi 6 in mind The multi-gigabit 2.5G ports on the DGS-1520 series PoE switches eliminate potential bottlenecks in connecting to WiFi 6 gigabit access points. Touchless deployments For multi-site network expansion, the latest firmware and network configurations for the DGS-1520 series switches can be downloaded without the need to involve on-site IT personnel, making deployments easier and faster. Advanced L2 and L3 features Advanced, selected software features - Q-in-Q, VRRP, RIP and OSPF enable adaptation to changes in the network. For businesses with increasing bandwidth and network expansion requirements, the DGS-1520 series switches are a cost-effective upgrade option with 10-gigabit connections for network infrastructure. Hybrid staking Stack up to eight DGS-1520 switches using 10GBASE-T copper and/or SFP+ fiber ports. Hybrid stacking support increases cabling capability and lower cost by using copper instead of fiber. Simplified management Centrally manage multiple large networks with wired or wireless devices using D-View 7 to reduce cost and maintenance. There is also a D-Link Network Assistant (DNA) available to simplify setup and management of smaller networks.
Desktop switch, 16 gigabit ports, including 16 PoE+ ports 16 Gigabit RJ45 ports 16 PoE+ ports, power and data transfer via one cable Compatibility with PoE-powered devices operating in IEEE 802.3af/at standards. Up to 30 W of PoE power on each PoE port PoE power supply support up to 120W for all PoE ports Up to 250m of data and power transmission in Extend mode Priority mode provides high priority for ports 1-4 Isolation Mode enables one-click separation of client traffic for improved security and performance. Automatic restart of PoE-powered devices that are dead or unresponsive thanks to the PoE Auto Recovery function. Plug and play connection, no configuration or complicated installation required. Dedicated 16 PoE+ ports (120 W budget) for many applications Compatibility with the 802.3af/at PoE+ standard provides up to 30 W of power on each PoE port. A total PoE power budget of 120W* for 16 PoE+ ports opens up a wide range of applications such as surveillance in offices, dorms and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers and more Perfect for monitoring - Up to 250 m of transmission Thanks to the Extend mode, the transmission distance can reach up to 250m, perfect for installing IP cameras in large areas. Auto lifting system with PoE Auto Recovery The switch automatically detects and restarts PoE-powered devices such as cameras and access points when they stop working or become unresponsive, ensuring stable device operation without the need for manual monitoring and restarting. Intelligent power management When total power consumption exceeds 120W, Intelligent Power Management turns off power to the lowest priority port to provide power to higher priority ports and thus protect the device from overload. It also enables automatic detection of the PoE power required by a given device and protects non-PoE devices from damage. Durable metal housing The internal components of the TL-SG116P switch are protected by a high-quality metal housing ensuring a long product life. After passing a series of rigorous reliability tests, the TL-SG116P delivers switching performance you can rely on.
The TP-Link Omada SG2428LP V1 is a high-performance, smart managed switch designed to meet the demands of modern businesses. With a robust security framework, it ensures the safety of network data through encryption and access control measures. Its high-capacity networking capabilities, featuring a 56 Gbps switching capacity and support for up to 4000 VLAN groups, make it an ideal solution for complex network setups. The switch also offers efficient power and data connectivity with 16 PoE+ ports, simplifying the network infrastructure by combining power and data lines into a single cable. Additionally, the device's comprehensive network management features allow for easy setup, monitoring, and maintenance of the network, while its advanced networking features optimize traffic and enhance security. With its fanless design and durable metal housing, the TP-Link Omada SG2428LP V1 operates silently and reliably, making it a versatile choice for any business environment.
