Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
Add this QSFP module for distances up to 10 kilometers to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power, transceiver supply voltage, temperature, laser bias current monitoring, and other key parameter monitoring. These options can be helpful not only to alert the user during abnormal transceiver activity but also if specific customizable operating limits are exceeded. Monitoring allows you to plan ahead, make informed decisions and predict necessary upgrades or maintenance based on the transceiver performance.
AF60 LR is a 60GHz radio designed for high-throughput connectivity over an extended range. The airFiber 60 LR features the integrated high-gain dish antenna for high speed long-range performance Point-to-Point (PtP) links. New WaveTechnology enables incredible long-range performance within the 60GHz spectrum.Includes a built-in Bluetooth management radio for easy setup. Low-Interference 60 GHz Spectrum Integrated GPS Long Range Up to 12 km Precision Alignment Mount Included link.ui.com Planning Support Quick Setup Using the *UISP™ App via Bluetooth *UNMS Controller will change to UISP™ Controller from version 1.3.0 onward.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
CS4228-24GT-375 28-Port Cloud Managed Desktop Gigabit Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
TSW040 on Teltonika 8-portiline haldamata PoE+ kommutaator, millel on kaheksa RJ45 porti, mille koguvõimsus on 240 W või kuni 30 W ühe pordi kohta. Sellel kompaktsel ja vastupidaval 8-portilisel kommutaatoril on ka 2-poolne toitesisend ja integreeritud DIN-kandur lihtsaks paigaldamiseks, mis muudab selle ideaalseks tööstuslikeks rakendusteks. TSW040-l on lai pingevahemik 7-57 VDC ja PoE-väljalülituse pingevahemik 44-57 VDC. 8 X POE-OUT RJ45Kaheksa PoE-out Ethernet-porti, mille koguvõimsuse eelarve on 240 W2-POOLNE TOITESISENDLihtne ja sobib tööstuslikeks rakendusteksINTEGREERITUD DIN-KÕVAKETTAGALihtne paigaldus plug-and-play kasutuselevõtuksLAI PINGEVAHEMIK7-57 VDC või 44-57 VDC PoE-väljalülitamiseks
Täiustatud WiFi 6 juurdepääsupunkt kõrge jõudluse ja paindliku paigaldusvõimalusegaSee WiFi 6 juurdepääsupunkt on loodud pakkuma suurepärast traadita ühendust, toetades täiustatud MU-MIMO tehnoloogiat ja mitme kasutaja samaaegset ühendamist. Ideaalne nii ärikeskkondadesse kui ka suure kasutajatihedusega kohtadesse, tagades sujuva ühenduse tänu PoE toitevarustusele ja mitmekülgsetele paigaldusvõimalustele.Mehaanilised spetsifikatsioonid:Mõõdud: Ø197 x 35 mm (Ø7.8 x 1.4") – stiilne ja madala profiiliga disain.Kaal:Ilma kinnitusteta: 580 g (1.3 lb)Kinnitusega: 720 g (1.6 lb)Korpuse materjal: Vastupidav polükarbonaat tagab pikaealisuse.Kinnituse materjal: Roostevaba teras (SUS304) kindla toe jaoks.Ilmastikukindlus: IP54 reiting, sobib varjulisse väliskeskkonda.Riistvara ja ühenduvus:Võrgu liides: (1) Gigabit Ethernet RJ45 port kiirete ühenduste jaoks.Juhtimisliides: Ethernet ja Bluetooth lihtsaks seadistamiseks ja haldamiseks.Toiteviis: PoE (Power over Ethernet).Toiteallikas: Ühilduv UniFi PoE lülitiga või PoE adapteriga (ei kuulu komplekti).Toetatud pingevahemik: 44—57V DC.Maksimaalne energiatarve: 13W.WiFi jõudlus:Maksimaalne edastusvõimsus:2.4 GHz: 22 dBm5 GHz: 26 dBm6 GHz: Ei ole toetatudMIMO:2.4 GHz: 2 x 2 UL MU-MIMO5 GHz: 4 x 4 DL/UL MU-MIMO6 GHz: Ei ole toetatudMaksimaalne andmeedastuskiirus:2.4 GHz: Kuni 573.5 Mbps (BW40)5 GHz: Kuni 4.8 Gbps (BW160)6 GHz: Ei ole toetatudAntenn ja LED indikaatorid:Antennivõimendus:2.4 GHz: 4 dBi5 GHz: 6 dBi6 GHz: Ei ole toetatudLED indikaatorid: Valged/sinised LED-id staatuse näitamiseks.Paigaldus ja töötingimused:Paigaldusvõimalused: Seinakinnituse ja laekinnituse tarvikud on kaasas.Töötemperatuur: -30 kuni 60° C (-22 kuni 140° F).Tööniiskus: 5 kuni 95% mitte-kondenseeriv.Sertifikaadid: CE, FCC, IC sertifitseeritud.Tarkvara ja WiFi standardid:WiFi standardid: 802.11a/b/g/n/ac/ax (WiFi 6), et tagada uusimad traadita tehnoloogiad.Traadita turvalisus: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) turvalisteks ühendusteks.BSSID: Toetab kuni 8 BSSID-d raadio kohta.VLAN tugi: 802.1Q täiustatud võrgu haldamiseks.Täiustatud QoS: Kasutajapõhine kiiruse piiramine liikluse optimeerimiseks.Külalisvõrgu isoleerimine: Toetatud parema võrgu turvalisuse jaoks.Samaaegsed kliendid: Toetab 350+ klienti samaaegselt.Null viivisega DFS: Jah* (toetatud tulevaste püsivara versioonidega).Toetatud andmeedastuskiirused:802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b: 1, 2, 5.5, 11 Mbps802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11n: 6.5 Mbps kuni 600 Mbps (MCS0 - MCS31, HT 20/40)802.11ac: 6.5 Mbps kuni 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)802.11ax (WiFi 6): 7.3 Mbps kuni 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
Stacking Physically stacking up to 8 switches for expansion and redundancy Touchless installation Seamless multi-site deployment with automatic configuration download Large PoE budget Power over Ethernet (PoE) budget up to 370W allows you to power multiple devices. 10G connections Four 10-gigabit ports for stacking or uplinking Multi-gigabit PoE ports Four 2.5G PoE ports, ideal for Gigabit Wi-Fi 6 access points Redundant power An optional redundant power supply ensures uninterrupted operation Advanced L2 and L3 features Easily adapt to network changes with selectable Q-in-Q, VRRP, RIP and OSPF features Limited Lifetime Guarantee Register your product to take advantage of Lifetime Limited's lifetime warranty A new dimension in Managed Smart Switches Expandable network with high-performance 10-gigabit stackable switches to increase productivity and uptime. High availability Simplification of management and cabling increases the efficiency and reliability of the network. Physical stacking up to 8 switches with a total bandwidth of 80G. Designed with Wi-Fi 6 in mind The multi-gigabit 2.5G ports on the DGS-1520 series PoE switches eliminate potential bottlenecks in connecting to WiFi 6 gigabit access points. Touchless deployments For multi-site network expansion, the latest firmware and network configurations for the DGS-1520 series switches can be downloaded without the need to involve on-site IT personnel, making deployments easier and faster. Advanced L2 and L3 features Advanced, selected software features - Q-in-Q, VRRP, RIP and OSPF enable adaptation to changes in the network. For businesses with increasing bandwidth and network expansion requirements, the DGS-1520 series switches are a cost-effective upgrade option with 10-gigabit connections for network infrastructure.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
Ubiquiti UXG-Pro on täiustatud ettevõtte tasemel ruuter, mis on loodud pakkuma suure jõudlusega võrgu- ja turvalahendusi. See pakub tugevaid liikluse haldamise funktsioone, sujuvat integreerimist UniFi tsentraliseeritud haldusplatvormiga ning võimsaid turvavahendeid tänapäeva ettevõtetele.Peamised omadused:Kõrge jõudlus: Varustatud võimsa riistvaraga, mis suudab käsitleda kiiret andmevahetust ja keerukaid võrgukeskkondi.Täpsem turvalisus: Sisaldab sissetungide tuvastamist ja ennetamist (IDS/IPS), sügavat pakettide inspekteerimist ja tulemüüri funktsioone võrkude kaitsmiseks ohtude eest.Topelt-WAN ja varuühendus: Toetab mitut internetiühendust automaatse üleminekuga, tagades katkestusteta internetiühenduse.Tsentraliseeritud haldus: Täielikult ühilduv UniFi pilvepõhise kontrolleriga, mis muudab võrkude haldamise ja jälgimise lihtsaks kõikjalt.Laiendatav disain: Ideaalne kasvavatele ettevõtetele, kuna seda saab hõlpsasti laiendada vastavalt võrgu vajadustele.Rack-kinnitusega: Sobib standardsetesse andmekeskuse riiulitesse professionaalseks paigaldamiseks.
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
The Mercusys MA30H V2 network adapter is a powerful, dual-band wireless solution designed to meet the demands of modern connectivity. With support for both 2.4 GHz and 5 GHz bands, users enjoy flexible and high-speed Internet access, making it ideal for streaming, gaming, and downloading. The device offers data transfer rates of up to 867 Mbps on the 5 GHz band and 400 Mbps on the 2.4 GHz band, ensuring smooth and efficient online experiences. Security is paramount, and the MA30H V2 addresses this with WPA3-SAE encryption, offering users peace of mind with enhanced network protection. Additionally, the adapter features MU-MIMO technology, which optimizes the communication process between the router and multiple devices, significantly improving the network's capacity and efficiency. Its Plug-and-Play compliance makes setup straightforward, eliminating the need for complex configurations. Whether for work or play, the Mercusys MA30H V2 network adapter is a reliable choice for anyone looking to upgrade their wireless connectivity.
The Acer Wave 7 Wi-Fi system is designed to meet the demands of modern homes and small offices, offering reliable connectivity and performance. With its support for Wi-Fi CERTIFIED 7 standards, users can enjoy fast Internet speeds across multiple bands (2.4 GHz, 5 GHz, and 6 GHz). The device's 3-port switch and mesh networking capabilities allow for easy expansion and coverage throughout your space, ensuring that all your devices stay connected. Advanced features like Hybrid QoS, Multi-Link Operation (MLO), and Firmware Over-the-Air (FOTA) updates enhance the online experience, providing smooth streaming, gaming, and browsing. Additionally, the inclusion of a WPS button and reset button simplifies network setup and management, making the Acer Wave 7 a smart choice for those seeking a powerful, yet user-friendly Wi-Fi system.
The UniFi Access Hub comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories, such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access Controller software. Easily manage users, visitors, schedules, and access policies with the intuitive browser-based interface.
RUT206 on kompaktne tööstuslik ruuter, mis toetab RS232 ja RS485 jadaliideseid ning aktiivseid ja passiivseid PoE-sisendeid. Tänu vastupidavale konstruktsioonile, 2-poolusele toitesisendile ja microSD-pesa kaudu laiendatavale andmesalvestusele on see ideaalne valik mitmesuguste asjade interneti- ja M2M-rakenduste jaoks. See 4G Cat 4 ruuter on varustatud avatud lähtekoodiga RutOS-tarkvaraga ja toetab selliseid peamisi tööstuslikke protokolle nagu Modbus, DNP3 ja DLMS.ÜHENDUS4G Cat 4, 3G, 2GJADALIIDESEDRS232 ja RS485 jadakommunikatsiooniks2-POOLNE TOITESISENDLihtne ja sobib tööstuslike rakenduste jaoksPoEAktiivsed ja passiivsed PoE sisendid
WU1300S AC1300 High Gain USB Wi-Fi Adapter AC1300 WiFi speed Dual Band - Perfect for video streaming and online gaming The high-gain antenna provides a strong signal Home Security standards ensure the security of your wireless network Compatible with Windows 7/8/8.1/10, Mac OS
The DIGITUS 1x8 HDMI splitter delivers vibrant 4K resolution, making it an ideal choice for multi-screen setups. With support for video formats including DTS and Dolby Digital, this splitter ensures an immersive audio experience alongside high-quality visuals. The robust metal housing enhances durability and contributes to a sleek desktop form factor.With a video bandwidth of 18 Gbps and a maximum supported resolution of 3840 x 2160, the DIGITUS HDMI splitter provides clarity and precision in every detail. Featuring 8 HDMI ports, this device allows for multiple outputs without compromising performance. LED status indicators and auto EDID configuration simplify operation, ensuring optimal settings for your setup.
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
Experience 2.5 Gb/s Speeds with Stable, Hassle-Free Connectivity The ASUS USB-C2500 V2 delivers ultra-fast and stable networking at speeds up to 2.5 Gb/s-2.5 times faster than standard gigabit network adapters. Compatible with USB-C and major operating systems, including Windows, macOS, and Linux, its an easy way to upgrade your NAS server, laptop, or desktop for faster and more reliable wired connections. Sleek, Compact Design for Easy Portability The ASUS USB-C2500 V2 is a compact and convenient network accessory for home, work, or travel. Its hand-sized design and built-in 10 cm cable make it easy to carry and use on the go. Whether youre working remotely, streaming media, or transferring data, it provides a reliable, space-saving solution for stable wired connectivity wherever you are. Instant Network Insight with LED Indicators The USB-C2500 V2 features intuitive LED indicators that allow you to easily check the network connection status at a glance. These LEDs provide real-time feedback, helping you quickly identify and troubleshoot network connectivity issues.
Netgear 5 x 10/100/1000 Platinum Ethernet Switch, Lifetime Hardware Warranty Type Ethernet Switch Modem speed 10/100/1000 Mbps Gigibit Ethernet I/O ports 5 Ports Connector type Plastic LED Power, Link/Activity Form Factor Desktop or wall-mountable Noise 0 dBA (Fanless) Power 5V / 0.7A DC Power Adapter Power consumption 2.34 W Max. Features Energy Efficient Ethernet Support (IEEE 802.3az); 9,216 bytes Jumbo Frame Support; 2K MAC table; 1 Mbit Packet buffer; MTBF (@ 25° C): 1,386,257 hours; Electromagnetic compliance: Class B Dimensions 118 x 73 x 30 mm Weight 0.10 kg
Original part number PLW1000-100PES Product name Netgear Powerline 1000Mbps AC650 1PT GbE Adapters Bundel + WiFi (PLW1000) Producer Netgear Class of product HomePlug adapter Communication ports 10/100/1000 Base-T (RJ45) Supported protocols and standards IEEE 802.11acIEEE 802.11bIEEE 802.11gIEEE 802.11nIEEE 1901IEEE 802.3 Supported operation systems Windows 7Windows 8Windows XPMac OS X Standard accessory 2 x Ethernet cableInstallation Manual Colour White Width 121 mm100 mm Height 87 mm59 mm Depth 38 mm35.9 mm Net weight 266 g126 g Additional information Set include PLW100 Access Poin and PL1000 More info Specification [LINK]
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
