Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
TwistPort Adaptor for ePMPIntegrates ePMP connectorized radios into TwistPort eco-system. What is TwistPort AdaptorTwistPort Adaptor converts 3rd party radio coaxial interface into RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and requires no tools. Making 3rd party radios compatible with TwistPort enables using the radio with any TwistPort antenna ever made with superior performance, noise immunity and network scalability. Designed For ePMPTwistPort Adaptor for ePMP is compatible with Cambium Networks ePMP 1000 AP/CSM, ePMP Force 300 CSM and ePMP 3000L AP. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency and great VSWR.
ePMP MP 3000 MicroPOP Access PointThe ePMP MP 3000 is Cambium Networks' MicroPOP solution for WISP's and Enterprise network operators. The MicroPOP MP3000, part of the ePMP portfolio, solves the need for injecting additional capacity where it is needed most as well as extending network coverage in a cost-effective, light-weight manner. For example, a WISP can expand coverage to a new sub-division or area of a village that wasn't previously reachable by the core ePMP network. Additionally, a WISP or enterprise operator may need to inject additional capacity to a small campus or enclave of buildings. The MP 3000 along with ePMP Subscriber Modules can also serve as a distribution network for wi-fi access points.The MicroPOP MP 3000 is based on 802.11ac Wave 2 technology and can interoperate with any combination of up to 64 of the ePMP Force 300 series of subscriber modules (including Force 300-13, -13L, -16, -19, -19R and -25) as well as the Force 180/190/200 with backwards compatibility. Capacities of up to 600 Mbps are achievable with a range typically of one mile or 1.5 kilometers. The MP 3000 features an integrated omni antenna in a ruggedized IP67 enclosure.MicroPOP Applications: Extend Coverage Areas: deploy the MP 3000 in places unreachable by the main tower or to add adjacent coverage for new subscribers with lower overall density Inject New Capacity: deploy the MP 3000 to a set of customers demanding especially high capacity services Backhaul for Outdoor Wi-Fi Access Points: deploy the MP 3000 and ePMP Subscriber modules to create a hub-and-spoke backhaul for multiple wi-fi access points. Key Specifications: 2X2 MIMO support with peak throughput of 600 Mbps 256QAM-5/6, 80 MHz support Supports a wide frequency range: 4910 to 5950 MHz Supports up to 64 subscriber modules Integrated 9 dBi Dual-Polarity Omni-directional antenna Cloud or on-premises network management with cnMaestro NOTE: the MP 3000 does not support GPS synchronization and does not have an integrated real-time spectrum analyzer.
A heavy-duty 2.4GHz access point with extra miniPCI slot three SIM slots GNSS support (GPS GLONASS BeiDou Galileo) and LTE modem for International bands 1 2 3 7 8 20 38 and 40 The LtAP LTE kit is a compact weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity.Connect to the LtAP’s built-in high power 2.4 GHz 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP LTE kit also has one Gigabit Ethernet LAN port for wired devices. The RS232 serial port gives you console access for debugging.• 2.4 GHz AP in a rugged case• LTE installed in miniPCIe slot• Second miniPCIe slot for expansions• Three Mini SIM slots• Gigabit Ethernet port• Built-in GPS• Many powering options (DC jack POE-in automotive)• Serial port and full size USB for other devices• Perfect for cars or outdoor mobile applications The unit comes with two miniPCIe slots (one already populated with LTE modem) offering many expansion options. For example you can install second LTE modem for redundancy or 5 GHz interface to have dual concurrent 2.4 GHz / 5G hz AP + LTE. Unit is powered by Dual-Core 880 MHz CPU and 128 MB RAM to deal with heavy loads.LtAP has a special enclosure with a wall mounting kit three miniSIM slots to alternate between cellular providers and integrated GNSS support (GPS GLONASS BeiDou Galileo) making this a perfect device for use in moving vehicles like cars buses or trains. External GPS antenna is available for ordering separately (not included product code ACGPSA).The LTE card is connected to two internal antennas with u.FL connectors so if you want you can unplug the connectors and add your own external LTE antenna for better coverage. The unit has several powering options: 12-30 V PoE-in by Ethernet port DC jack and automotive connector.Use the built in GPS module to track the location of your vehicle in real time we have even provided a simple tracking application example in the RouterOS documentation to help you start development of your platform. Three models are available: • LtAP LTE kit (RBLtAP-2HnD&R11e-LTE) with R11e-LTE modem for International bands 1 2 3 7 8 20 38 and 40.• LtAP 4G kit (RBLtAP-2HnD&R11e-4G) with R11e-4G modem for International / USA bands 3 7 20 31 41n 42 and 43.• LtAP (RBLtAP-2HnD) without LTE card. Included parts
Teltonika FMC001LTE/GNSS/BLE plug and play OBD trackerTeltonika FMC001 represents next step in communication technology – this is the first Plug and Track LTE OBD device with GNSS and Bluetooth connectivity. Possibility to read OBD II parameters effortless installation and detailed accelerometer data provides a compelling solution. This is perfect tracker for a wide range of applications – fleet management of light commercial vehicles car rental & leasing driver log-book insurance telematics (UBI) and so on. Device supports various Bluetooth Low Energy sensors beacons firmware and configuration update via Bluetooth.
Teltonika MSP500Special GNSS/GSM/Bluetooth tracker with speed limiting functionalityMSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity internal GNSS/GSM antennas RS232 interface and internal Ni-Mh battery. Device was designed for speed limiting control.Speed limitingMoreover device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching or accelerator pedal control using additional electronic throttle controller.
Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
The ADDERLink™ INFINITY 3000 (ALIF3000) delivers real-time access to unlimited physical and virtual machines (VM) from a single human-machine interface (HMI). The new KVM receiver brings VM access to the multi award-winning ADDERLink INFINITY range allowing users to seamlessly and securely switch between virtual and physical machines directly from their user workstation - without the need to rip and replace existing KVM infrastructure. Built on the successful Intel® X-86 microprocessor architecture the ALIF3000 delivers pixel-perfect picture quality, audio and USB 2.0 to single or dual screens over a single 1GbE link. Dual-head, video, audio and USB over a single fibre connection Unlimited access to virtual and physical machines Pixel-perfect, color accuracy Bi-directional analog audio Adder's USB True Emulation for fast switching
Features and Benefits 10/100BaseT(X) (RJ45 connector) Compact size for easy installation QoS supported to process critical data in heavy traffic IP40-rated metal housing -40 to 75°C wide operating temperature range (-T models) The EDS-2005-EL series of industrial Ethernet switches have five 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2005-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) with DIP switches on the outer panel. In addition, the EDS-2005-EL Series has a rugged metal housing to ensure suitability for use in industrial environments. The EDS-2005-EL Series has a 12/24/48 VDC single power input, DIN-rail mounting, and high-level EMI/EMC capabilities. In addition to its compact size, the EDS-2005-EL Series has passed a 100% burn-in test to ensure it will function reliably after it has been deployed. The EDS-2005-EL Series has a standard operating temperature range of -10 to 60°C with wide-temperature (-40 to 75°C) models also available.
Features and Benefits 10/100BaseT(X) (RJ45 connector) Compact size for easy installation QoS supported to process critical data in heavy traffic IP40-rated metal housing -40 to 75°C wide operating temperature range (-T models) The EDS-2005-EL series of industrial Ethernet switches have five 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2005-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) with DIP switches on the outer panel. In addition, the EDS-2005-EL Series has a rugged metal housing to ensure suitability for use in industrial environments. The EDS-2005-EL Series has a 12/24/48 VDC single power input, DIN-rail mounting, and high-level EMI/EMC capabilities. In addition to its compact size, the EDS-2005-EL Series has passed a 100% burn-in test to ensure it will function reliably after it has been deployed. The EDS-2005-EL Series has a standard operating temperature range of -10 to 60°C with wide-temperature (-40 to 75°C) models also available.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Features and Benefits 2 Gigabit uplinks with flexible interface design for high-bandwidth data aggregation QoS supported to process critical data in heavy traffic Relay output warning for power failure and port break alarm IP30-rated metal housing Redundant dual 12/24/48 VDC power inputs -40 to 75°C operating temperature range (-T models) The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service (QoS) function, broadcast storm protection, and the port break alarm function with DIP switches on the outer panel. The EDS-2010-ML Series has 12/24/48 VDC redundant power inputs, DIN-rail mounting, and high-level EMI/EMC capability. In addition to its compact size, the EDS-2010-ML Series has passed a 100% burn-in test to ensure it will function reliably in the field. The EDS-2010-ML Series has a standard operating temperature range of -10 to 60°C with wide-temperature (-40 to 75°C) models also available.
Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
Features and Benefits 10/100BaseT(X) (RJ45 connector) Compact size for easy installation QoS supported to process critical data in heavy traffic IP40-rated metal housing -40 to 75°C wide operating temperature range (-T models) The EDS-2008-EL series of industrial Ethernet switches have up to eight 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. To provide greater versatility for use with applications from different industries, the EDS-2008-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) with DIP switches on the outer panel. In addition, the EDS-2008-EL Series has a rugged metal housing to ensure suitability for use in industrial environments and fiber connections (Multi-mode SC or ST) can also be selected. The EDS-2008-EL Series has a 12/24/48 VDC single power input, DIN-rail mounting, and high-level EMI/EMC capability. In addition to its compact size, the EDS-2008-EL Series has passed a 100% burn-in test to ensure it will function reliably after it has been deployed. The EDS-2008-EL Series has a standard operating temperature range of -10 to 60°C with wide-temperature (-40 to 75°C) models also available.
Built-in 4 PoE+ ports support up to 60 W output per port Wide-range 12/24/48 VDC power inputs for flexible deployment Smart PoE functions for remote power device diagnosis and failure recovery 2 Gigabit combo ports for high-bandwidth communication Supports MXstudio for easy, visualized industrial network management Introduction The EDS-P506E Series includes Gigabit managed PoE+ Ethernet switches that come standard with 4 10/100BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet ports, and 2 combo Gigabit Ethernet ports. The EDS-P506E Series provides up to 30 watts of power per PoE+ port in standard mode and allows a high-power output of up to 4-pair 60 W for industrial heavy-duty PoE devices, such as weather-proof IP surveillance cameras with wipers/heaters, high-performance wireless access points, and rugged IP phones. The EDS-P506E Series is highly versatile, and the SFP fiber ports can transmit data up to 120 km from the device to the control center with high EMI immunity. The Ethernet switches support a variety of management functions, including STP/RSTP, Turbo Ring, Turbo Chain, PoE power management, PoE device auto-checking, PoE power scheduling, PoE diagnostic, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The EDS-P506E Series is designed especially for harsh outdoor applications with 4 kV surge protection to ensure uninterrupted reliability of PoE systems. Additional Features and Benefits Supports different PoE output settings (High-power 36 W and 60 W, Force and Legacy modes) to maximize powered device compatibility Supports Smart PoE functions (PoE diagnosis, PD failure check, PoE scheduling, and PoE Event Warning) to enhance PoE operational efficiency Command line interface (CLI) for quickly configuring major managed functions Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring Supports V-ON™ to ensure millisecond-level Layer2/Layer3 network recovery Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), Gigabit Ethernet recovery time < 50 ms RSTP/STP, and MSTP for network redundancy Automatic warning by exception through email and relay output Port mirroring for online debugging IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1x, MAC ACL, HTTPS, SSH, and sticky MAC address to enhance network security SNMPv1/v2c/v3 for different levels of network management Fiber Check™ provides a comprehensive fiber Digital Diagnostic Monitoring (DDM) function and event warning on SFP fiber ports Bandwidth management to prevent unpredictable network status ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade
Jätkukiud on saadaval nii ühemoodilisi (SM) kui ka mitmemoodilisi (MM). Ühemoodilised jätkukiud vastavad standardile OS2 ning mitmemoodilised standarditele OM1, OM2, OM3 ja OM4. Poleeringu tüübid on ühemoodilistel jätkukiududel UPC või APC ning mitmemoodilistel üldjulul PC. Jätkukaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukiud on saadaval nii ühemoodilisi (SM) kui ka mitmemoodilisi (MM). Ühemoodilised jätkukiud vastavad standardile OS2 ning mitmemoodilised standarditele OM1, OM2, OM3 ja OM4. Poleeringu tüübid on ühemoodilistel jätkukiududel UPC või APC ning mitmemoodilistel üldjulul PC. Jätkukaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukiud on saadaval nii ühemoodilisi (SM) kui ka mitmemoodilisi (MM). Ühemoodilised jätkukiud vastavad standardile OS2 ning mitmemoodilised standarditele OM1, OM2, OM3 ja OM4. Poleeringu tüübid on ühemoodilistel jätkukiududel UPC või APC ning mitmemoodilistel üldjulul PC. Jätkukaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukiud on saadaval nii ühemoodilisi (SM) kui ka mitmemoodilisi (MM). Ühemoodilised jätkukiud vastavad standardile OS2 ning mitmemoodilised standarditele OM1, OM2, OM3 ja OM4. Poleeringu tüübid on ühemoodilistel jätkukiududel UPC või APC ning mitmemoodilistel üldjulul PC. Jätkukaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Fiiberoptika ühendus/patch paneelid on 19“ laiused ning kõrgusega 1U või 2U. Paneelid on liikuva esipaneeliga kui ka liikuvate küljekinnitustega, mis tagab parema juurdepääsetavuse paigalduse ajaks. Paneelid on kahes erinevas värvitoonis RAL 7035 (hall) ja RAL 9005 (must)
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
