Ubiquiti POE-24-7W is a PoE adapter designed to power various Ubiquiti devices.Compatible with most products (check the device specification before determining compatibility):airFiberairMAXEdgeMAXmFiUniFi APUniFi Video / airVision.Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protectionClamping protectionMaximum surge dischargePeak pulse currentAC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors. Ubiquiti PoE Adapter Compatibility with the airGateway™ Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network. The airGateway is available in three models: airGateway Standard model with an internal antennaairGateway Pro Dual-Band Wi-Fi model with an internal antennaairGateway-LR Long-range Wi-Fi model with an external antenna for extended range The airGateway plugs into any of these PoE Adapters: Model Number CompatibilityPOE-15-12W ✓POE-24-12W ✓POE-24-12W-G ✓*POE-24-7W ✓*POE-24-12W-G-WH ✓* * airGateway maximum LAN port speed: 100 Mbps
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: Red
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS industrial fast Ethernet switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port.It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
8 x Fast Ethernet porti 1,6 Gbps kommutatsioonivõimsus Edasisaatmiskiirus: (64 baidi suuruste pakettide puhul). Kaitsekindla IP30-klassi metallist lüliti Sisaldab DIN-riba ja seinakinnituse klambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse toiteallika Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-M6024) Ventilaatorita disain tagab vaikse töö
HGO-antenna-OUTDual-band screw-on outdoor antennaDual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
Unifi Switch FlexBuild and expand your network with the UniFi® Switch part of the UniFi Enterprise System. The UniFi Switch model USW-Flex is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports providing 1 PoE input and 4 PoE output links to your devices.The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE USW-Pro-24-PoE and USW-Industrial switches sold separately) as power source USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.Managed and configured by the UniFi Controller or UniFi Mobile app the UniFi Switch Flex offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere. PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installed horizontally or vertically making it ideal for desktop magnetic wall-mount and pole-mount installations. Indoor/Outdoor Design The USW-Flex is designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options the USW-Flex provides both flexibility and durability for environments with extreme temperature variations. Compatible Products The USW-Flex powers a variety of products including the UniFi Video Camera G3 Flex UniFi Video Camera G4 Pro and UniFi AC Mesh AP which use 802.3af PoE. To enable its maximum power budget of 46W the USW-Flex can be powered by the USW-Industrial switch which provides 60W of 802.3bt PoE++. Seamless Integration A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring configuration maps statistics and admin accounts.
• 250 Watt power supply unit • Improved failover of the LANCOM XS-5116QF, LANCOM XS-6128QF, LANCOM GS-4554X, or LANCOM GS-4530X • Hot-swappable – can be inserted during operation • Input voltage: 110 VAC and 230 VAC • Output voltage: 12 V @20 A • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C • Not suitable for operation in ambient temperatures below -40°C and above 70°C
The Inter-Tech ST-729 is a single-port Gigabit LAN adapter for use in desktop environments. The Intel® i210 chipset, with its implemented features, can largely relieve the main processor, so that network transfer no longer places as much demand on the main processor as is often the case with normal network cards, and it is also energy-efficient with low power consumption in idle mode according to IEEE802.3az.
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
Robustly Designed for Critical Business Applications Designed to be installed in heavy industrial demanding environments, the IGS-4215-8T2S is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit Switch family to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports, and 2 extra 100/1000BASE-X SFP fiber ports for data and video uplink. The IGS-4215-8T2S is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing. Environmentally Hardened Design With the IP30 industrial case, the IGS-4215-8T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-8T2S can be placed in almost any difficult environment. Robust Protection The IGS-4215-8T2S provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. Redundant Ring, Fast Recovery for Surveillance System The IGS-4215-8T2S supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as < 450ms. Robust Layer 2 Features The IGS-4215-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the IGS-4215-8T2S allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the IGS-4215-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Efficient Traffic Control The IGS-4215-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. User-friendly and Secure Management For efficient management, the IGS-4215-8T2S is equipped with Command line, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-4215-8T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and SSHv2 protocol. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. . Powerful Security from Layer 2 to Layer 4 PLANET IGS-4215-8T2S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows limiting the number of network devices on a given port. Advanced Network Security The IGS-4215-8T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Flexibility and Long-distance Extension Solution The two additional SFP slots built in the IGS-4215-8T2S support 100BASE-FX /1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The IGS-4215-8T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Industrial-grade Switch for Building Automation and Security Suitable for buildings where security is strictly to be enforced, the IGS-4215-8T2S, with eight high-speed Gigabit Ethernet interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. Model that Withstands Harsh Operation and Extends Distance The IGS-4215-8T2S is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-4215-8T2S is easy and helpful to build a Gigabit high-bandwidth switched network quickly.
8 x Gigabit PoE+ porti PoE võimsuse eelarve 120W@24V - 200W@48V 16Gbps kommutatsioonivõimsus Karastatud IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba ja seinakinnitusi Töötemperatuuri vahemik -40° - 75° C (-40° - 167° F) Kaks 24-56 V alalisvoolu sisendit redundantsuse tagamiseks TRENDneti 8-portiline tööstuslik Gigabit PoE+ DIN-Rail lüliti, mudel TI-PG80B, on tööstuslik muutuva pingega lüliti, millel on kaheksa gigabit PoE+ porti ja 200 W PoE-võimsuse eelarve. Kasutajatel on võimalik ühendada kaheksa PoE+ seadet selle tööstusliku muutuva pingega PoE+ kommutaatoriga, et tagada kiire ühenduvus võrku. Tööstuslik muutuva pingega PoE+-lüliti on varustatud vastupidava IP30-klassi metallkorpusega ning see on kavandatud taluma suurt vibratsiooni ja lööki, töötades samal ajal laias temperatuurivahemikus -40° - 75° C (-40° - 167° F) tööstuskeskkonnas. Tööstusliku muutuva pinge lüliti kaks 24-56 V alalisvoolu sisendit tagavad redundantsi koos toitealarmi releega.
8 x Gigabit PoE+ ports 2 x Gigabit ports 2 x SFP slots 110W PoE power budget Easy-to-use web-based management interface Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping Extend PoE+ signal up to 656 ft./200m at 10Mbps Front panel 4-digit LED display provides PoE power statistics Surveillance mode GUI for simplified configuration and network monitoring Device discovery for ONVIF compliant IP cameras and NVRs Upload building floorplans to create an E-map of surveillance devices Change IP camera IP address settings Upgrade IP camera firmware Change IP camera administrator user name and password Bandwidth control per port 802.1Q, MAC, Surveillance, and Voice VLAN support IEEE 802.1p QoS with queue scheduling support 24Gbps switching capacity IEEE 802.1p QoS with queue scheduling support TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device auto-recovery and power scheduling. Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance fiber networking applications. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature. Smart Surveillance Management These managed ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device. Integration Flexibility Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration. PoE Device Alive Check PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. Hardware Design Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included PoE Power Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices Surveillance Mode ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device Long Range PoE+ Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps 4-Digit PoE LED Display 4-digit 7-segment LED display to view total power, available power, and power-per-port IPv6 Ready ONVIF switches support IPv6 configuration and IPv6 neighbor discovery Traffic Management Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management Troubleshooting A convenient cable diagnostic test and traffic statistics aid in network troubleshooting Monitoring RMON, SNMP, and Port Mirroring support administrator monitoring solutions
Converts a non-PoE port to a PoE++ Gigabit port Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W) Integrated power supply Network a PoE device up to 100m (328 ft.) away Save on installation and equipment costs IEEE 802.3af/at/bt compliant
See Delocki jaotur võtab DisplayPort-signaali vastu arvutist või sülearvutist ja jagab selle kolmele ühendatud ekraanile. Seega saab ühe DisplayPort-ühenduse abil kasutada kolme DisplayPort-monitori. Multi-Stream Transport (MST) Toode on MST-keskjaam ja toetab DisplayPort'i laiendatud töölaua konfiguratsiooni. See võimaldab kombineerida mitu monitori üheks suureks ekraaniks. Kahe režiimi DP++ Väljundid on kaherežiimilised (DP++), nii et sobivate adapteritega saab ühendada HDMI- või DVI-monitore. Kõrge eraldusvõime Tänu DisplayPort 1.4 suuremale ribalaiusele on toetatud kokku kolm 4K resolutsiooniga (3840 x 2160) monitori. Spetsifikatsioon Ühendused: Sisend: DisplayPort: 1 x DisplayPort isane 1 x USB Type Micro-B female (5 V toiteallikas): 1 x USB Type Micro-B female (5 V toiteallikas) Väljund: 3 x DisplayPort emasühendus: 3 x DisplayPort emasühendus Kiibistik: VMM5330 DisplayPort 1.4 spetsifikatsioon DisplayPort väljund toetab Dual Mode DP++ Aktiivne muundur, Single- / Multi-Stream Transport Hub (SST / MST) Funktsioonid: Peegeldatud või laiendatud (ainult Windows) Toetab Display Stream Compression 1.2 (DSC) Toetab HDR Toetab HDCP 1.4 ja 2.2 Maksimaalne resolutsioon (sõltuvalt süsteemist ja ühendatud riistvarast): DisplayPort 1.4 Multi-Stream Transport (MST): 2 ekraani: kuni 3840 x 2160 @ 60 Hz 3 kuvarit: kuni 3840 x 2160 @ 30 Hz + 1 x kuni 3840 x 2160 @ 60 Hz DisplayPort 1.4 Multi-Stream Transport (MST) + DSC: 2 kuvarit: kuni 5120 x 2880 @ 60 Hz 3 ekraani: kuni 3840 x 2160 @ 60 Hz Audio- ja videosignaalide edastamine Värv: must Kaabli pikkus ilma pistikuteta: ca. 12,5 cm Mõõtmed ilma kaabliteta (LxSxK): ca. 105 x 43 x 14 mm Süsteeminõuded Windows 7/7-64/8.1/8.1-64/10/10-64 Vaba DisplayPort-liitmik Laadija 1 x USB Type-A 5 V / 2 A Pakendi sisu DisplayPort jaotur USB toitekaabel, pikkus: ca. 0,5 m Kasutusjuhend
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
Seda Delocki kaablit kasutatakse jadaühenduse pikendamiseks ja seda saab kasutada erinevate D-Sub 9-poldilise pistiku abil ühendatud seadmete ühendamiseks. Spetsifikatsioon - Liitmikud: 1 x D-Sub 9-pin isane > 1 x D-Sub 9 pin emane - Kruvidega ühendused - Kaabli gabariit: 30 AWG - Pikkus koos pistikutega: ca. 5 m - Värv: beež Süsteeminõuded - Vaba 9-pooluseline D-Sub-liitmik
