Hardened Industrial 100/1000 Base-T to SFP Media Converter TI-F11SFP (Version v1.0R) Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter SFP port accommodates Multi or Single Mode fiber Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module Includes DIN-rail and wall mounts Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range Dual redundant power inputs with overload current protection Powers supply sold separately (model TI-M6024)
TRENDneti TI-UPG62 on usaldusväärne IP30 kaitsevaba DIN-redeli Ultra PoE-lüliti, mille vastupidav korpus on mõeldud ekstreemseteks tööstuskeskkondadeks. See pakub 4 Gigabit Ultra PoE-porti, 240 W PoE-võimsuse eelarvet, kahte spetsiaalset SFP-pesa ja 12 Gbps kommutatsioonivõimsust. Kaks üleliigset toitesisendit ja toitealarmi relee. Ultra PoE 240 W PoE-võimsuse eelarve varustab kuni nelja Power over Ethernet seadet PoE (15,4 W), PoE+ (30 W) või Ultra PoE (60 W) võimsusega. Riketolerantsus Omab kahte välistest toiteallikatest saadavat redundantset toitesisendit (primaarne ja RPS) ning väljundhäirereleed, mis annab märku sisendtoite rikke korral. Tööstuskindla konstruktsiooniga Varustatud vastupidava IP30 klassifikatsiooniga korpusega ja kavandatud taluma suurt vibratsiooni, lööki, kaitset ESD / EMI / ülepinge eest ning töötama laias temperatuurivahemikus (- 40 - 75 °C) karmides tingimustes. PoE-võimsuse eelarve 240-vatine PoE-võimsuse eelarve varustab kuni nelja Power over Ethernet seadet PoE (15,4 W), PoE+ (30 W) või Ultra PoE (60 W) võimsusega. Võrgupordid 4 x Gigabit Ultra PoE porti ja 2 x spetsiaalset SFP-pesa. DIN-riba / seinakinnitus IP30 klassifikatsiooniga metallist korpus koos kaasasoleva DIN-riba ja seinakinnituse riistvaraga Lülitusvõimsus 12 Gbps kommutatsioonivõimsus Redundantne toide Kaks üleliigset redundantset toitesisendit koos ülekoormusvoolukaitsega (toiteallikad müüakse eraldi, mudel TI-S24048). Häirerelee Häirerelee, mis käivitub esmase ja/või üleliigse toiteallika voolukatkestuse korral. Jumbo Frame Saadab suuremaid pakette ehk Jumbo Frame'i (kuni 9 KB), et suurendada jõudlust. Hinnatud äärmuslikele keskkondadele Vastupidav IP30 klassifikatsiooniga korpus, mis on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama laias temperatuurivahemikus (- 40 - 75 °C), mis on mõeldud karmide keskkondade jaoks. Elektromagnetiline vastavus Vastab FCC osa 15 B-osa A-klassi ja CE EN 55022 A-klassi standarditele. Sertifikaadid Hinnatud infotehnoloogia (ITE) seadmetele (EN55022/24); tööstus-, teadus- ja meditsiiniseadmetele (ISM) (EN55011). Löögi- ja vibratsioonikindlus Hinnatud löökidele (IEC 60068-2-27), vabalangemisele (IEC 60068-2-32) ja vibratsioonile (IEC 60068-2-6). Maanduspunkt Maanduspunkt kaitseb seadmeid väliste vooluülekannete eest.
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).
Fully Integrated RadioLaunched in 2008, the Bullet™ design helped transform the WISP industry. Its unique design upgrades link performance and reduces deployment complexity.Carrier-Class ThroughputThe Bullet™AC delivers up to 300+ Mbps real TCP/IP throughput.
LevelOne KILBY 28-Port L3 Lite Managed Gigabit Fiber Switch GTL-2872The GTL-2872 switch is a Gigabit Ethernet access switch with four 10G uplink ports. The switch is ideal for Internet Service Providers (ISPs) and Multiple System Operators (MSOs) to provide home users with triple-play services with up to Gigabit bandwidth. It is also an ideal Gigabit access switch for SMB, enterprise, and campus networks. The GTL-2872 switch is packed with features that bring high availability, comprehensive security, robust multicast control, and advance QoS to the network edge, while maintaining simple management. The switch also supports the most advance IPv6 management, IPv6 security, and IPv6 multicast control in accordance with the growth of IPv6 deployment. ISPs can expand their services from home to business users by providing a more reliable and resilient network (ITU-T G.8032 ERPS), L2 VPNs, and advanced OAM (Operations, Administration, and Maintenance) functions to ensure service-level agreements.Standards:IEEE 802.3 10-BASE-T, EthernetIEEE 802.3u 100-BASE-TX, Fast EthernetIEEE 802.3ab 1000BASE-T, Gigabit EthernetIEEE 802.3ad Link Aggregation Control ProtocolIEEE 802.3ae changeable (10GBASE-SR/LR/ER)IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers, and 10G DAC/AOCIEEE 802.3x Flow ControlIEEE 802.3x for full duplex mode , Back-Pressure for half duplex modeIEEE 802.1D Spanning Tree Protocol (STP)IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)Memory: Flash 256MBBuffer Memory: DRAM 512MBPort:20 x 1G SFP port4 x 10/100/1000 (RJ45/SFP) Combo port4 x SFP+ 10 Gigabit Uplink Port1 x RJ45 Console portIndicator: PWR, DIAG, LINKPower Input: 100-240VAC, 50-60HzDC Power Input (48-60VDC)Power Consumption: 21.48WBackplane (Gbps): 128GbpsMAC Address Table: 16KPower Saving: IEEE 802.3az Energy-Ef?cient Ethernet (EEE)Operating Temperature (°C): 0ºC ~ 50ºCOperating Humidity (Non-condensing): 10% ~ 90%Storage Humidity (Non-condensing): 10% ~ 90% General:Tri-speed (10/100/1000BASE-T) copper interfacesAuto-negotiation for port speed and duplex modeAuto MDI/MDI-XDigital Diagnostic Monitoring (DDM) on 10G SFP+ port onlyVLANs:Supports 4K VLANPort-based VLANIEEE 802.1Q VLANGVRPVLAN TrunkingIEEE 802.1v Protocol-based VLANIP Subnet-based VLANMAC-based VLANTraffic SegmentationL2 Virtual Private NetworkQ-in-QVLAN TranslationL2 Protocol tunneling (xSTP, CDP, VTP & PVST+)CDP/PVST+ FilteringIGMP Snooping:IGMP v1/v2/v3 snoopingIGMP Proxy reportingIGMP FilteringIGMP ThrottlingIGMP Immediate LeaveIGMP QuerierOAMIEEE 802.3ah LinkIEEE 802.1ag Connectivity Fault Management :Connectivity checkLoopbackLinktraceITU-T Y.1731 Performance and Throughput Management:Frame DelayFrame Delay variationIPv4/IPv6 dual protocol stackSecurity:Port securityIEEE 802.1X port based and MAC based authentication Dynamic VLAN Assignment, QoS AssignmentMAC authentication Web authentication Voice VLANGuest VLANL2/L3/L4 Access Control ListPrivate VLANRADIUSPort IsolationWeb-based GUIManagement:CLI, WEB, TELNETL3:IPv4 static routeIPv6 static route Packet Forwarding Rate: 95MppsJumbo Frame (K): 9KBSwitching Capacity: 128Gbps
LogiLink's Home Cables are perfect for home or office cabling. The new, compact Cat.7 Home Cable from LogiLink meets all the requirements of the IEEE 802.3 standard for applications up to 10GBase-T and is ideal for use with LogiLink RJ45 connectors MP0030, MP0033 or MP0044 for the production of connecting cables in the desired length. It even better than Cat.7 cable as Cat.7 is not further advantages are the low weight, the small cable diameter and the low bending radius.
Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 24 V DC, 57 V DC väljundpinge: 24 V DC, 57 V DC Lisaandmed: 16 ports 100Mbps, Input ja väljund pinge 24 to 57 V DC
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
The DIGITUS L2 managed Gigabit PoE Switch with 8 PoE+ ports and 2 Gigabit SFP ports is ideal for use in various network topologies such as SMBs. The extensive L2 configuration options allow you to increase the performance and efficiency of your network. The switch offers the possibility to segment the network via VLAN, the QoS feature ensures smooth data exchange for time-critical applications. The Spanning Tree Protocol or the Port Trunk can be used to create fail-safe connections with other switches. The switch can be managed via the web interface, SNMP, SSH or Telnet.
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
