Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
Environmentally Hardened Design PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-5225-8P2T2S, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-5225-8P2T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2T2S can be placed in almost any difficult environment. The IGS-5225-8P2T2S also allows either DIN rail or wall mounting for efficient use of cabinet space. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-8P2T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-5225-8P2T2S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-5225-8P2T2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-5225-8P2T2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-8P2T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-8P2T2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-5225-8P2T2S supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T2S port shows link down, link up or power failure. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-8P2T2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-8P2T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-8P2T2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-8P2T2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-8P2T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-8P2T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P2T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-8P2T2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P2T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P2T2S makes the installation of IP cameras or wireless AP easier and more efficient.
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
See Delocki adapter võimaldab teil ühendada tavalised kõrvaklapid, millel on kaks 3,5 mm stereopesa meesliitmikku, millel on standardne 3-pin viikude määramine, oma nutitelefoni või tahvelarvuti, millel on 3,5 mm 4-pin stereopesa emasport. Lihtsalt ühendage oma peakomplekti pistikupesa adapteri värvikooditud emasportidega. Spetsifikatsioon - Liitmik: 1 x stereopesa 3,5 mm 4-pin isasliitmik > 2 x stereopesa 3,5 mm 3-pin emasliitmik - Stereopesa emas: roosa: mikrofon / roheline: heli - Pinnide määramine 4-pin stereopesa isane OMTP-standardiga (ülemine > varrukas) Vasakpoolne heli - Parempoolne heli - AUX - GND - Värv: must - Kaabli pikkus: ca 10 cm (koos pistikutega) Süsteeminõuded - Vaba 4-pini stereopesa Pakendi sisu - Adapter
Seda Delocki audio stereopesa kaablit saab ühendada oma MP3-mängija, mobiiltelefoni, tahvelarvuti, sülearvuti jne. vaba stereopesa pesaga, et saada kaks stereopesa pesaga liidest. Nii saavad kaks inimest hõlpsasti kuulata muusikat vms, läbi kõrvaklappide. Spetsifikatsioon - Ühendus: 1 x 3,5 mm 3-pin audio stereopesa isane > 2 x 3,5 mm 3-pin stereopesa emane - Kaabli pikkus: ca 25 cm (koos pistikutega) - Värv: must Süsteeminõuded - Vaba 3,5 mm stereopesa Pakendi sisu - Kaabel
The ultra-small USB adapter comes with Bluetooh 5.0 technology which allows fast pairing and stable and energy-saving connectivity. Turn non-Bluetooth PCs or laptops into Bluetooth-capable devices; making it possible to connect with Bluetooth headphones, speakers, keyboards, mice, etc. You can use the USB-C and USB-A port as you like and thanks to the mini size the BT0054 by LogiLink is also easily portable and perfect for on the go.
See Delocki dokkimisjaam võimaldab USB-C™-liidese kaudu ühendada väliselt kuni kaks 2,5″ või 3,5″ SATA HDD- või SSD-ketast. See lahendus ei nõua välist korpust, sest ketta saab ühendada otse dokkimisjaama. Lisaks võimaldab kloonimisfunktsioon kopeerida ühe kõvaketta sisu teisele ilma arvutit kasutamata. Spetsifikatsioon Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ emane 2 x SATA 6 Gb/s 22-pooluseline pesa 1 x alalisvoolu pesa Kiibistik: Asmedia ASM1352R Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti 2,5″ ja 3,5″ SATA HDD / SSD jaoks Sobib kõikidele SATA HDD-dele kuni SATA 6 Gb/s kiirusega Andmeedastuskiirus kuni 6 Gb/s LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta Mõõtmed (LxSxK): ca. 153 x 110 x 62 mm Plug & Play Toiteallika spetsifikatsioon Seina toiteallikas Sisend: V / 50 ~ 60 Hz / 1,5 A Väljund: 12 V / 3 A Maandus väljastpoolt, pluss seestpoolt Mõõdud: ø ca. 2,1 mm, seestpoolt: ø ca. 2,1 mm väljast: ø ca. 5,5 mm pikkus: ca. 10 mm Süsteeminõuded Linuxi tuum 4.9.4 või uuem versioon Mac OS 10.13.3 või uuem versioon Windows 7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Dokkimisjaam Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 80 cm Väline toiteallikas 12 V / 3 A Kasutusjuhend
Der Netzwerkadapter Argus ST-7215 bietet eine hervorragende Performance und sorgt für schnellen Datendurchsatz. Der verbaute Intel® X540 Chipsatz entlastet den Hauptprozessor weitestgehend und sorgt so für einen schnellen Datentransfer bei niedriger CPU Auslastung. Standard Netzwerkadapter in Serverumgebungen nutzen dagegen oftmals die Rechenleistung des Hauptprozessors. Der Anschluss erfolgt durch einen RJ45-Port mit einer Geschwindigkeit von bis zu 10 Gbit/s.
This ergonomical designed soft mouse pad by Delock acts due to its wrist rest relieving when working with a mouse. With its smooth filling the ball of the hand lays comfortable on the mouse pad. Specification • Flexible soft mouse pad • Wrist rest • Rubberized bottom • Dimensions (LxWxH): ca. 245 x 206 x 20 mm • Weight: ca. 108 g • Colour: grey Package content • Mouse pad
See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
RG-RAP2260(G) Reyee Wi-Fi 6 AX1800 Ceiling Access Point Build ultra-fast network with Wi-Fi 6 technology. Client connections over 500, better multi-user experience. Provide higher practical performance for users as well. Easily install extra AP with Reyee Mesh technology. Set up Wi-Fi 6 network in 3 minutes with Ruijie Cloud APP.
Seda Delocki SFP+ moodulit saab kasutada vaba SFP+ pesaga 10 gigabitise kommutaatori laiendamiseks RJ45-liidesega. Spetsifikatsioon - Ühendused: 1 x SFP+ isane > 1 x RJ45 pesa - Andmeedastuskiirus: Gigabit Ethernet kuni 1 Gbps NBASE-T (eelnõu) kuni 2,5 Gbit/s ja 5 Gbit/s. 10 Gigabit Ethernet kuni 10 Gbit/s - Töötemperatuur: 0 °C ~ 65 °C Süsteeminõuded - Vaba SFP+ pordiga seade Pakendi sisu - SFP+ moodul
Delocki PCI Express kaart laiendab arvutit nelja välise USB 3.0 pordi võrra. Saab ühendada erinevaid USB-seadmeid, nagu dokkimisjaamad, kaardilugejad, välised korpused jne. Spetsifikatsioon - Ühendused: välised: USB 3.0 Type-A emane: 4 x USB 3.0 Type-A emane sisemine: 1 x SATA toiteühendus 1 x PCI Express x1, V2.0: 1 x PCI Express x1, V2.0 - Kiibistik: VLI - Andmeedastuskiirus kuni: SuperSpeed 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s Süsteeminõuded - Windows Vista/Vista-64/7/7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 3.4 - Arvuti, millel on üks vaba PCI Express x1 / x4 / x8 / x16 / x32 pesa - Toiteallikas vaba SATA-toiteühendusega Pakendi sisu - PCI Express kaart USB 3.0 - Juhi CD - Kasutusjuhend
See Delocki tööriistakomplekt sisaldab kõiki tööriistu võrgukaablite paigaldamiseks: kaabli eemaldaja, pressimistööriist, mulgustamistööriist ja võrgukaabli tester. Käepärases kotis on komplekt turvaline kaasaskandmiseks ja kiirelt kasutusvalmis. Spetsifikatsioon • Võrgukaabli tester RJ45 / RJ12 jaoks koos eemaldatava kaugjuhtimisseadmega • Võrgukaabli tester akupesaga 1 x 9 V aku jaoks (ei kuulu komplekti) • Lõikemehhanismiga stantsimistööriist • Kaabli eemaldaja keerdpaar- ja koaksiaalkaablite jaoks • Kaabli eemaldaja reguleeritav erinevate kaabli läbimõõtude jaoks • RJ45 pistikute pressimistööriist • Kott • Koti mõõdud (PxLxK): ca. 21,5 x 13,0 x 5,0 cm
Seda Delocki vöötkoodiskannerit saab ühendada juhtmevabalt arvutiga, sülearvutiga või otse mobiiltelefoni või tahvelarvutiga. Kõiki levinud 1D- ja 2D-viivakooditüüpe saab täpselt registreerida ka pikkade vahemaade tagant. Lisaks tunneb skanner ära ekraanidel ja monitoridel kuvatavad vöötkoodid. Automaatne kohanemine ümbritseva heledusega Skanner kohandub automaatselt vastavalt ümbritseva keskkonna heledusele ja jäädvustab optimaalsetes valgustingimustes kuni 120 skaneeringut sekundis. Vähese ümbritseva heleduse korral valgustab vöötkoodi täiendav valge LED ja seega saab seda kasutada ka kehvades valgustingimustes. Tugev töötlemine Tänu oma vastupidavale konstruktsioonile suudab skanner hõlpsasti taluda kuni 1,80 m kõrguse kukkumise ja sobib seega ideaalselt kasutamiseks tööstuskeskkonnas. Laadimisjaam toimib liidesena Skaneeritud vöötkoodide andmeedastus toimub kas Bluetoothi või 2,4 GHz sagedusala kaudu. Lisaks käsiskänneri laadimisele toimib skänneri induktiivne laadimisjaam ka nii Bluetoothi kui ka 2,4 GHz liidese funktsioonina ning on süsteemiga ühendatud USB-kaabli kaudu. Spetsifikatsioon Laadimisjaam - Ühendus: 1 x USB 2.0 Type-A pistikupesa - Sisendpinge: 5 V töö: max. 1100 mA ooterežiim: max. 700 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must - Kaal: umbes 295 g - Mõõtmed (LxSxK): ca. 180 x 100 x 75 mm - Kaabli pikkus ilma pistikuteta: ca. 1,25 m - Bluetooth standard V 4.1 - 2,4 GHz Vöötkoodi skanner - Dekodeeriv kiip: ARM Cortex 32 Bit - Laetav aku: Li-Polümeer aku 1800 mAh - Resolutsioon: max. 1280 x 800 - Käiviti: skaneerimisnupp - Lugemiskaugus: ca. 30 mm kuni 500 mm - Lugemise täpsus: 3 - 4 millimeetrit - Mõõtmisvahemik: kuni 10 m 2,4 GHz: kuni 100 m - Sisemine mälu: 16 MB - Valguse värvus: nähtav punane LED - Kompensatsioonivalgus: LED valge - Andur: CMOS-pildiandur - Skaneerimiskiirus: kuni 120 skaneerimist sekundis - Skaneerimisnurk: 55° - Ümbritsev heledus: max. 100000 luksi - Sisendpinge: 5 V - Voolutarve: V 5 töö: max. 220 mA ooterežiim: max. 20 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must / oranž - Kaal: umbes 321 g - Mõõtmed (LxSxK): ca. 185 x 100 x 80 mm - Skaneerimiskoodid: Koodid: Code 128 Kood 39 Vahelagunenud 2 5-st EAN-8 / EAN-13 ISBN - 13 Andmemaatriks Micro PDF417 Micro QR PDF417 QR-kood Süsteeminõuded - Android 9.0 või uuem versioon - Bluetooth standard 4.1 või kõrgem - iPad Pro (3. põlvkond) või uuem - Mac OS 10.15.5 või uuem - Windows 8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port dongle'i jaoks Pakendi sisu - Vöötkoodi skanner - USB-laadimiskaabel - Laadimisalus - Kasutusjuhend
See Delocki antenn võimaldab kasutada erinevaid LTE-, GSM- ja UMTS-sagedusalasid nii siseruumides kui ka välistingimustes. See on täielikult ühilduv Bluetooth, WLAN 2,4 GHz, ZigBee, DECT, Z-Wave ja LoRa 868 MHz / 915 MHz. Spetsifikatsioon - Ühendus: 1 x SMA-pistik - Sagedusvahemik: 690 - 960 MHz 1710 - 2170 MHz 2400 - 2700 MHz - ZigBee, DECT, Z-Wave, LoRa 868 MHz / 915 MHz - Antenni võimendus: 3 dBi - Impedants: 50 Ohm - VSWR: 2,0 - Polarisatsioon: vertikaalne - Ülekandevõimsus: max. 10 W - Antenni tüüp: varrasantenn - Seinakinnitused - Töötemperatuur: -30 °C ~ 70 °C - Korpuse materjal: plastik - Alus: metall - Värv: must - Kaabel: koaksiaalkaabel - Kaabli tüüp: RG-58 - Kaabli värvus: must - Kaabli läbimõõt: ca. 5 mm - Kaabli sumbuvus: 1 GHz meetri kohta: 0,57 dB @ 1 GHz meetri kohta - Kaabli pikkus: ca 3 m - Mõõtmed (LxD): ca. 26,9 x 1,6 cm Süsteeminõuded - Vaba SMA-pistikupesaga seade Pakendi sisu - Antenn - Kinnitusklambrid ja kruvid
Seda Delocki USB 2.0 kaablit saab ühendada aktiivsesse USB-porti ja see võimaldab 5 m pikkust pikendust. 5 m pikkuste lisakaablite ühendamisega saate USB-porti pikendada kuni 25 m kaugusele. Spetsifikatsioon Pistikud: 1 x USB 2.0 Type-A isane > 1 x USB 2.0 Type-A emane Kiibistik: FE 1.1 Ühendamiseks aktiivse USB-pordi külge Kaabli mõõtmed: Kaabli mõõtmed: 28 AWG andmeliin 22 AWG toiteliin Pikendus kuni 5 x 5 m kaablitele Ühendused: kullatud Võimsus: kuni max. 500 mA Kaabli pikkus: ca 5 m Süsteeminõuded Linuxi tuum 3.2 või uuem Mac OS 10.9 või uuem Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba aktiivne USB A-tüüpi port Pakendi sisu USB 2.0 pikenduskaabel 5 m
See Delocki kaabel võimaldab ühendada DisplayPort-monitori USB-C™-i või Thunderbolt™ 3-pordiga arvuti või sülearvutiga, nagu MacBook või Chromebook. Liides peab toetama DisplayPorti alternatiivrežiimi. Spetsifikatsioon • Ühendused: 1 x USB Type-C™ isane > 1 x DisplayPort 20 kontaktiga isane • Kiibistik: küpress • DisplayPort 1.2 spetsifikatsioon • Signaali suund: USB Type-C™ sisend > DisplayPort väljund • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Heli- ja videosignaalide edastamine • Toetab 3D-kuvasid • Toetab HDCP 1.4 • USB siini toitega • Plug & Play • Ühendused: kullatud • Värvus: must • Pikkus ilma pistikuteta: ca. 3 m
Deko XE75 Pro AXE5400 tri-band 6E mesh Wi-Fi system Wi-Fi 6E for the whole house - cover an area of up to 2,900 meters with seamless next-generation Wi-Fi and make dead zones and buffering a thing of the past All-new 6 GHz band - Experience the latest Wi-Fi frequency, eliminating interference from all older devices. The 6 GHz band also provides powerful dedicated backhaul that further improves the Wi-Fi performance of non-6E devices True tri-band speed - all three Wi-Fi bands work together to unleash a total network speed of up to 5,400 Mbps for 200 devices Artificial intelligence-driven mesh - connects your home under a single name and password, while ensuring the best connections as you move from room to room TP-Link HomeShield - keeps your home network secure with state-of-the-art network and IoT protection features Easier than ever to set up - the Deco app guides you through setup step-by-step Universal compatibility - backwards compatible with all generations of Wi-Fi and works with any Internet Service Provider (ISP) and modem