Powerful Layer 3 Gigabit Routing for Enterprise-level Solution PLANET SGS-6341-24P4X Layer 3 PoE Stackable Managed Gigabit Switch provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 128Gbps switching fabric, the SGS-6341-24P4X can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the SGS-6341-24P4X perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. The SGS-6341-24P4X has 24 IEEE 802.3at PoE+ ports and PoE budget up to 370 watts for catering to medium to large scale of VoIP or IP surveillance networks at a competitive cost. Centralized Power Management for Gigabit Ethernet PoE Networking To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the SGS-6341-24P4X features high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all ports. It perfectly meets the power requirements of PoE VoIP phone and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater. The SGS-6341-24P4X’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from the restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates the cost for additional AC wiring and reduces installation time. PoE Schedule for Energy Saving Besides being used for IP surveillance, the SGS-6341-24P4X is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the SGS-6341-24P4X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save energy and budget. High Performance 10Gbps Ethernet Capacity The four SFP+ slots built in the SGS-6341-24P4X boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. IP Stacking Management The SGS-6341-24P4X supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network. Layer 3 Routing Support The SGS-6341-24P4X enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. Full IPv6 Support The SGS-6341-24P4X provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built. Robust Layer 2 Features The SGS-6341-24P4X can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341-24P4X allows the operation of a high-speed trunk combined with multiple ports. It enables up to 16 groups for trunking with a maximum of 8 ports for each group. Excellent Layer 2 to Layer 4 Traffic Control The SGS-6341-24P4X is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission. Powerful Security The SGS-6341-24P4X supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341-24P4X also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Efficient and Secure Management For efficient management, the SGS-6341-24P4X Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341-24P4X offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341-24P4X supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For reducing product learning time, the SGS-6341-24P4X offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-6341-24P4X offers secure remote management by supporting SSH connection which encrypts the packet content at each session. Intelligent SFP Diagnosis Mechanism The SGS-6341-24P4X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. High Availability Mesh Networking Solution for Big Data System By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-24P4X offers up to 128Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SGS-6341-24P4X features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-6341-24P4X is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm. Excellent Solution to Core/Data Center Security and QoS Switch The SGS-6341-24P4X performs 128 Gigabits per second non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341-24P4X provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features. Layer 3 VLAN Routing With the built-in robust Layer 3 traffic routing protocols, the SGS-6341-24P4X ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6341-24P4X is certainly a cost-effective and ideal solution for enterprises.
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two self-tapping screws.
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm.GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred. The GPEN family of products includes switches with outdoor enclosures, which support powering from PoE sources, such as the GPEN11 injector. A basic setup inside customer premisis to provide the Internet connection. Power adapter is not included in the package.
Lihtne paigaldus 4 x Gigabit PoE+ porti ja 1 x Gigabit porti Võtab DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. DIP-kommutaator toetab VLAN-portide isoleerimist ja QoS-i 10 Gbps lülitusvõimsus 32W PoE eelarve Seinale paigaldatav disain Vastupidav metallist lüliti Kasutage koos TRENDneti PoE jagajaga, et ühendada võrku ja toita mitte-PoE-seadmeid 5-pordiline Gigabit Long Range PoE+ Switch, mudel TPE-LG50, edastab andmeid ja toite üle olemasolevate Ethernet-kaablite Power over Ethernet (PoE) seadmetele, nagu pääsupunktid, VoIP-telefonid ja IP-kaamerad. See toetab nii PoE (802.3af) kui ka PoE+ (802.3at) seadmeid 32 W PoE-eelarvega. Võta DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel, et pikamaa PoE-installatsioonid saaksid toimida. Ühendage ja mängige see tugev metallist lüliti usaldusväärseks kiireks PoE-võrguks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. PoE+ võimsus 32 W PoE-võimsuse eelarve toetab kuni nelja Power over Ethernet seadet. Gigabit Viis Gigabit-porti pakuvad 10 Gbps kommutatsioonivõimsust, et toetada servavõrkude paigaldamist. Pikaulatuslik PoE+ kommutaator Võta DIP-lüliti kasutusele, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta 32 W võimsuse eelarvega. Pordid Neli Gigabit PoE+ porti ja üks Gigabit-port Pikaulatuslik PoE+ Võtab DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) pikkade PoE-paigaldiste jaoks. Portide isoleerimine DIP-lüliti on ideaalne järelevalvevõrkude rakenduste jaoks, kuna see võimaldab ka portide 1-4 isoleerimist. Lülitusvõimsus 10 Gbps lülitusvõimsus Korpus Seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad PoE ja pordi olekut
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
Fiber-to-Ethernet Converter UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFiber SFP Modules (power supply and SFP modules not included). The Convenience of Fiber UFiber Active Ethernet provides fiber connectivity to an RJ45 Ethernet device, which in turn provides 802.3af or 24V passive PoE to UFiber AE. Active Fiber to Customer’s Premises UFiber Active Ethernet provides data over long distances at high speed using fiber. Indoor Installation Use the included bracket to easily mount UFiber Active Ethernet on a wall. Fiber Type Active SFP Module Compatibility SFP or SFP+(All UFiber Modules) SFP Port Speed 1 Gbps PoE Input 24V Passive PoE802.3af PoE RJ45 Port Speed 10/100/1000 Mbps Mounting Wall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
8 x Gigabit ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Wide operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (model: TI-M6024) TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. Integration Flexibility Managed layer 2 features include VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Shock and Vibration Resistant The industrial layer 2 managed switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6). Industrial Design Equipped with an IP30 rated metal enclosure, the industrial layer 2 managed switch operates within a wide temperature range of -40° – 75° C (-40° – 167° F). Network Ports Gigabit ports for high-speed network connectivity and SFP slots for long distance fiber applications Traffic Management Layer 2 Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping, and IP Source Guard provide the industrial layer 2 managed switches with layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure, includes DIN-rail mounting bracket for the industrial layer 2 managed switch Redundant Power Redundant power inputs with overload current protection (power supply sold separately) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power to the industrial layer 2 managed switch Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance from the industrial layer 2 managed switch Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges on the industrial layer 2 managed switch
HGO-antenna-OUTDual-band screw-on outdoor antennaDual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!
EXTREMECLOUD IQ : INDOOR WIFI 6 AP, 2X2 RADIOS WITH DUAL 5GHZ AND 1X1GE PORT. INTEGRATED LIGHT/POWER SENSORS & BLE/ZIGBEE. AI/ML GREEN MODE. EXTERNAL ANTENNA SUPPORT. ANTENNAS SOLD SEPARATELY. INCLUDES CONNECT. DOMAIN : REST OF WORLD
D-Link AC1200. Maximum data transfer rate (2.4 GHz): 300 Mbit/s, Maximum data transfer rate (5 GHz): 867 Mbit/s, Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. WAN-ühendus: Ethernet (RJ-45). Paigutus: Post, Toote värv: ...