RACK case 19" 3U 180 mm whiteCR19-3U-180-WThe vertical RACK housing allows assembling the devices in the RACK standard with a maximum depth of 350 mm while taking up little space.Installation and operation of devices in a new type of RACK housing is trouble-free and extremely easy. The housing door opens from the top down at an angle of 90 degrees. For this reason we get full opening and unlimited access to the devices.Special cylinders mounted in the housing slow down the opening of the housing door. Such a solution causes the fact that the risk of damage to the assembled equipment is minimised and the comfort of use is significantly increased.Broken cable glands were designed in the back of the housing. They allow breaking the appropriate ribs which will make it easier to lead in and lead out cables.The door is closed with a patent lock (included with a set of two keys).The holes in the back of the housing allow it to be hung with wall plugs.
The nature of the rack shelf allows one to place devices not equipped in any handle assemblies in a suitable RACK cabinet. High-quality steel from which the shelf is made ensures its strength and stability of the structure.The bottom of the shelf has openings that can be used to provide additional security of devices by using cable ties additionally they do not block the air supply.A new series of STALFLEX rack shelves equipped with a special hole enabling the cable with a diameter of Ø45 to be led in. To the set are attached M6 screws with baskets and spacers.
The nature of the rack shelf allows one to place devices not equipped in any handle assemblies in a suitable RACK cabinet. High-quality steel from which the shelf is made ensures its strength and stability of the structure.The bottom of the shelf has openings that can be used to provide additional security of devices by using cable ties additionally they do not block the air supply.A new series of STALFLEX rack shelves equipped with a special hole enabling the cable with a diameter of Ø45 to be led in. To the set are attached M6 screws with baskets and spacers.
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages 512 MB of RAM 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall NAT and even some VPN.Like many other MikroTik switches CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS. The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport! But make no mistake – this small switch has all the power and features of its bigger rackmount analogue – the CRS326-24G-2S+RM nothing has been removed!CRS326-24G-2S+IN provides all the basic functionality for a managed switch and even more: port-to- port forwarding MAC filtering VLAN configuration traffic mirroring bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.
Connection box is made for connection of two Cat 6 cables punching them down into IDC type connection module. Unscreened(UTP) Its ideal solution for connecting broken or damaged cables.
Cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed configuration. Width 19" Height 12U Depth 600 mm Material powder coated steel Package size 635 x 590 x 120 mm
Wireless service providers and enterprises around the globe are challenged to deliver reliable connectivity in overcrowded RF environment. As spectrum increasingly becomes a scarce commodity finding the right broadband connectivity solution is vital for all low and high density types of deployments.Cambium Networks resolves this challenge with a breakthrough technology solution that delivers superior performance resiliency and reach in the most congested environments. Combining the latest 802.11AC Wave 2 chipset and the field proven TDD MAC of ePMP the Force 300-25 offers a compelling yet affordable point to point product and a future high gain subscriber module for the ePMP3000 Access Point.Force 300-25 continues the tradition of previous products with an integrated 25dBi dish with a narrow beamwidth and reliable mechanics. Supporting peak throughput greater than 500Mbps the Force300-25 also supports an always on spectrum analyzer and local WiFi management to take advantage of mobile installation applications.• Cambium Networks’ ePMP Force 300-25 is designed to operate in high interference environments and provides superior throughput of over 500 Mbps of real user data.• The ePMP Force 300-25 supports channel size configuration from 20MHz up to 80MHz and modulates up to 256 QAM.• The Force 300-25 supports a local Wi-Fi connection to allow easy installation configuration and monitoring from any Wi-Fi enabled device.• The ePMP Force 300-25 supports constant monitoring of the radio spectrum and allows for live action without bringing down the radio.• Configurable modes of operation ensure robust adaptivity to both symmetrical and asymmetrical traffic while providing high performance and round-trip latency as low as 3-5 ms.• QoS management offers an outstanding quality for triple play services – VoIP video and data – and provides three levels of traffic priority.• Long deployment range is enabled by a high gain antenna combined with 27dBm of transmit power.• This platform is for the user base that wants a smaller on premises footprint while enabling high gain.• Install is a breeze with the easy to install mount capable of pole and wall mounting.
TOL-4063Network tester with tone generator for tracking the wires of multipair cablesThis is a standart network cable tester with aditional option – tone generator and receiver for multipair cable – for finding rigth wires in the bundle.Tone generator is connected to the cable with a connector or with aligator clip and generates the tone which can be easily found with tone receiver – even in the big bundles of cables . When you place the receiver near the connected cable it starts generating tone and it amplifies as closer to the cable you are.Suitable not only for network cable.
TOL-4031This network cable tester is used for testing twosted pair wire connections with RJ11 RJ12 RJ45 connectors.Tests AT&T 258A EIA/TIA 568 Token Ring 10/100-Base-T each test is made one after another. Led indicators.
RP10-1U-GMasking Frame 10" 1U Gray 150 mm Blanking panel made of higth quality steel recommended for STALFEX Rack Cabinet's 10"Used mainly to mask free space between already installed devices at the same time it improves the proper air circulation inside the cabinet. Easy Instalation!Mounted to the front rack beams.
RP10-1U-BMasking Frame 10" 1U Black 150 mm Blanking panel made of higth quality steel recommended for STALFEX Rack Cabinet's 10"Used mainly to mask free space between already installed devices at the same time it improves the proper air circulation inside the cabinet. Easy Instalation!Mounted to the front rack beams.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
