See Delocki splitter võtab vastu DisplayPorti signaali arvutist või sülearvutist ja jagab selle kaheks ühendatud ekraaniks. Seega saab ühte DisplayPort-ühendust kasutada kahe DisplayPort-monitori kasutamiseks. Mõlemad väljundid on kaherežiimilised (DP++), nii et HDMI või DVI monitore saab ühendada sobivate adapteritega. Märge Toode on Multi-Stream-Transport (MST) jaotur ja toetab Displayport 1.2 laiendatud töölauakonfiguratsiooni. Mac OS-i kasutamisel kuvatakse mõlemas pordis sama pilt (peegelpildis), Mac'iga mõlemat porti pole võimalik üksteisest sõltumatult kasutada. Spetsifikatsioon • Ühendused: Sisend: 1 x DisplayPort 20 kontaktiga isane Väljund: 2 x DisplayPort 20 pin emane • Kiibistik: STDP4320 • DisplayPort 1.2a spetsifikatsioon • Aktiivne muundur, ühe / mitme vooga transpordijaotur (SST / MST) • Funktsioonid: peegeldatud või laiendatud (ainult Windows) • Maksimaalne eraldusvõime (olenevalt süsteemist ja ühendatud riistvarast): DisplayPort 1.1 või 1.2 ühe voo transport (SST): kuni 1920 x 1080 @ 60 Hz (peegel) DisplayPort 1.2 Multi Stream Transport (MST): kuni 2560 x 1440 @ 60 Hz või 3840 x 2160 @ 30 Hz (peegel või laiendatud) • DisplayPorti väljund toetab Dual Mode DP++ • Toetab Eyefinity/Single Large Surface (SLS) • Helisisendi formaadid: 7.1 kanal kuni 192 kHz diskreetimissagedus • Metallist korpus • Värvus: must • Kaabli pikkus ilma pistikuteta: ca. 30 cm • Mõõdud (PxLxK): ca. 100 x 67 x 23 mm Nõuded süsteemile • Windows 8.1/8.1-64/10/10-64, Mac ex OS 10.12 • Üks tasuta DisplayPorti emane
Need esmaklassilised passiivsed optilised seadmed jagavad ja ühendavad valgust fiiberoptilistes võrkudes. Neid on kolmes suuruses (väike, keskmine ja suur), et sobitada sümmeetrilist jaotussuhet vahemikus 1:2 kuni 1:64. Nendel moodulitel on ka meie suure jõudlusega 1,8 m LSZH kiudoptilised kaablid, mis on tehases kokku pandud LC- või SC-pistikutega. Suure tihedusega keskkondade jaoks mõeldud OCM8 moodulid on meie väikseimad integreeritud jaotusmoodulid. Need on virnastatavad ja optimaalse tiheduse ja kaablihalduse tagamiseks paigaldatavad CommScope'i OCSH-K-OCM6/8 riiulisse ja FIST-GR3 Top of Rack riiulisse. Need on saadaval ka sisseehitatud versioonidena, et neid hõlpsalt integreerida mis tahes kiudoptilisse jaotuskeskusesse või BUDI boxidesse OCM8 on mõeldud kasutamiseks nii sise- kui ka väliskeskkonnas. Seega on nad võrdselt võimelised valgussignaale jaotama ja kombineerima, et pakkuda uut teenust mitmes eluruumis (MDU) kui ka keskkontoris võrgutegevuse jälgimiseks. Mooduli saab hõlpsasti ka rakendusest eemaldada, ilma et see segaks teisi installitud komponente.Need passiivsed optilised jaoturid võivad teie võrgu levikut positiivselt mõjutada, laiendades võrku, vähendades vajalike kiudude arvu ja säästes juurutamiseks kuluvat aega.Lisaks saab neid vajaduse korral hõlpsasti teie võrku lisada, mis võimaldab teil CapExi kulutusi vajaduseni edasi lükata.
This optical module offers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth and aggregate bandwidth of 40 Gbps.It can provide a connection over 100 m on OM3 Multimode Fiber (MMF) and 150 m on OM4 MMF. The module has built-in digital diagnostic functions, including optical power monitoring, and will perform well in environments up to 70° C.It has been designed to meet the harshest conditions, including temperature, humidity and EMI interference, so we definitely recommend this as a reliable solution for all your 40 Gbps QSFP+ devices.
QuOmni LTE MIMO 2x2Omnidirectional multiband LTE MIMO 2x2 antennaQuOmni LTE omnidirectional MIMO 2x2 LTE antenna is working in Vertical polarization it´s desired for LTE/3G/2G connections. The antenna can be used for the most popular LTE bands (e.g. 3 7 20) frequencies 694-2700 MHz. That antenna is predicted to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains buses lorries yachts boats to receive Internet by LTE/3G. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.Cable length: 5m
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
This high quality standoff mounting set by Delock contains different thread sizes which can be used for secure mounting of PCBs to create a fixed distance between a printed circuit board and other components. By separating the PCBs from other components, the spacers allow a better ventilation and offer an optimal resistance to high temperatures, e.g. inside of a PC case. Specification • Content: 4 x M2.5, inside / inside, length 10 mm 4 x M2.5, inside / inside, length 20 mm 4 x M2.5, inside / inside, length 30 mm 4 x M2.5, inside / outside, length 10 mm 4 x M2.5, inside / outside, length 20 mm 4 x M2.5, inside / outside, length 30 mm 36 x M2.5 screw 12 x M2.5 nut 4 x M3, inside / inside, length 10 mm 4 x M3, inside / inside, length 20 mm 4 x M3, inside / inside, length 30 mm 4 x M3, inside / outside, length 10 mm 4 x M3, inside / outside, length 20 mm 4 x M3, inside / outside, length 30 mm 36 x M3 screw 12 x M3 nut 4 x M4, inside / inside, length 10 mm 4 x M4, inside / inside, length 20 mm 4 x M4, inside / inside, length 30 mm 4 x M4, inside / outside, length 10 mm 4 x M4, inside / outside, length 20 mm 4 x M4, inside / outside, length 30 mm 36 x M4 screw 12 x M4 nut 4 x M5, inside / inside, length 10 mm 4 x M5, inside / inside, length 20 mm 4 x M5, inside / inside, length 30 mm 4 x M5, inside / outside, length 10 mm 4 x M5, inside / outside, length 20 mm 4 x M5, inside / outside, length 30 mm 36 x M5 screw 12 x M5 nut 4 x M6, inside / inside, length 10 mm 4 x M6, inside / inside, length 20 mm 4 x M6, inside / inside, length 30 mm 4 x M6, inside / outside, length 10 mm 4 x M6, inside / outside, length 20 mm 4 x M6, inside / outside, length 30 mm 36 x M6 screw 12 x M6 nut • Material: brass nickel plated / steel • Box dimensions (LxWxH): ca. 250 x 190 x 40 mm Package content • Standoff mounting set Package • Box
AC1200 Whole Home Mesh Wi-Fi System One Unified Network – With advanced Mesh Technology, Halo units work together to form a single unified whole-home network with one Wi-Fi name and password. Seamless Roaming – Automatically switch between Halos as you move around your home, always getting the best signal to enjoy the fastest connections for all your devices. Whole-Home Coverage – Blanket up to 2,800 ft² (260 m²) with high-speed Wi-Fi. Hi-Speed Wi-Fi – Halo S12 provides fast and stable connections with speeds of up to 1,167 Mbps and works with major internet service providers (ISP) and modems. Ultra-High Performance – Enjoy lag-free connection and non-stop entertainment on all your devices, at the same time.
Advanced Gigabit PoE - Managed SwitchIntroducing the Advanced Power over Ethernet Switches, EdgeSwitch™ XP from Ubiquiti Networks. EdgeSwitch XP delivers reliable passive PoE and fast 10/100/1000 Mbps connectivity to attached Ubiquiti devices and other devices that support passive PoE.To connect your PoE devices, simply enable PoE in the easy-touse EdgeSwitch XP Configuration Interface. Each port can be individually configured to provide PoE, so both PoE and non‑PoE devices can be connected.EdgeSwitch XP is available in multiple versions to meet your deployment needs.EdgeSwitch 5XP is a cost‑effective, 5-port Gigabit switch with 24V PoE support.Advanced Features:• Port monitoring• System connection and management services• Virtual Local Area Network (VLAN) configuration• Spanning Tree Protocol (STP)/Rapid Spanning Tree Protocol (RSTP)• Jumbo Frame Support• Ping Watchdog• Configurable alerts
See Delocki adapter on tänu oma neljale erinevale videopordile ideaalne kaaslane reisidel või esitlustel. USB-C™-liidese ja DisplayPort'i asendusrežiimi toega arvutiga saab ühendada VGA-, HDMI-, DVI- või DisplayPort-monitori. Lisaks saab adapterit kasutada ka Thunderbolt™ 3 liidesega. Adapteriga saab kasutada ainult ühte monitori. Spetsifikatsioon - Ühendused: 1 x USB Type-C™ isane > 1 x VGA 15-poldiline emas 1 x HDMI-A 19-pooluseline emissioon 1 x DVI 24+5 emas 1 x DisplayPort 20-poolne emas - Kiibistik: VL100, PS8348B, PS8338B, IT6516, IT6561 - DisplayPort 1.2 ja kiire HDMI spetsifikatsioon - DVI-D (Single Link), VGA ei ole juhtmega ühendatud. - Ainult 1 monitor kasutatav koos adapteriga - Resolutsioon: DisplayPort kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) HDMI kuni 3840 x 2160 @ 30 Hz (sõltuvalt süsteemist ja ühendatud seadmestikust) ühendatud riistvarast) DVI ja VGA kuni 1920 x 1080 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). ühendatud riistvarast) - Energiatarve: max. 1.5 W - Kaabli pikkus ilma pistikuteta: ca. 15 cm - Värv: must Süsteeminõuded - iPad Pro (2018) - Linuxi tuum 4.6 või uuem - Mac OS 10.13.3 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - Arvuti või sülearvuti, millel on vaba USB Type-C™ port ja DisplayPort'i asendusrežiim või - PC või sülearvuti, millel on vaba Thunderbolt™ 3 port. Pakendi sisu - Adapter USB-C™ VGA / HDMI / DVI / DisplayPort'ile
Superior ProcessingUbiquiti Networks introduces our proprietary INVICTUS™ core communications processing engine. The speed, power, and efficiency of this integrated circuit enhances the performance of airFiber AF5/AF5U.Efficient Use of 5 GHz BandairFiber AF5/AF5U features 1 MHz center channel resolution with market-leading Power Envelope Tracking technology. airFiber AF5/AF5U accurately and continuously controls transmit power relative to the band edge. The power level automatically tracks to optimize performance near band edges, allowing you to choose the part of the band with the least interference. Long-Range LinksNewly developed for airFiber AF5/AF5U, the patent-pending xRT feature uses an innovative, adaptive multi-channel coding scheme to enhance radio transceiver performance, thereby maximizing your link budget and spectrum utilization – while still maintaining regulatory compliance. This results in links that can span distances from 10 m up to 100+ km.Quick and Easy InstallationThe unique sliding-clamp design of airFiber AF5/AF5U allows mounting hardware to be pre-assembled prior to installation – no more dropped screws at the top of the tower. As an added convenience, the drop-in cradle mount design allows the installer to attach mounting hardware to the pole without having to support the weight of the airFiber radio during installation.Radio Alignment DisplayIntroduced on airFiber AF5/AF5U, the Radio Alignment Display (RAD) makes aiming quicker and easier. The dual, calibrated signal strength indicators display the actual signal strength on the local and remote airFiber radios in real time. The comprehensive array of radio status indicators display the following:• GPS synchronization status• Master/slave mode• RF link status• RF overload warning• Current modulation mode• Link activity and speed for wired management and data ports
TRIPLE BAND OMNI ANTENNA WiSpot OA MMB0727-4V is an omnidirectional MIMO 2x2 antenna, working in VV-polarization, it´s desired for LTE connections. The antenna can be used for the most popular LTE bands (3,7, 20), frequencies 698-2700 MHz. On the bottom side the WiSpot has the full IP67 installation compartment, where You can easily install a n electronic board with LTE modem to get the ready-to-use IP67 device powered by PoE (802.3af) - RJ45 waterproof high-quality connector. That antenna is predicted to be installed on the buildings as the client antenna, as the hotspot or on the moving points like trains, buses, lorries, yachts, boats, company or standard cars to receive Internet by LTE. If You are looking for the solution which will give You the Internet access everywhere, that´s the antenna for You. WiSpot OA MMB0727-4V can be installed on the mast, a wall or the flat surface like car roofs. Systems LTE band - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 17, 18, 19, 20, 23, 25, 26, 27, 28, 33, 34, 35, 36, 37, 38, 39, 40, 41, 44, 2305-2360WiMAX - 2.3 GHz, 2.5 GHz, 700 MHz3G - 2100 MHz, 850 MHz, 900 MHzGSM - 1800 MHz, 1900 MHz, 850 MHzRFiD - 2400 - 2483 MHz, 865 - 868 MHz, 902 - 928 MHzISM - 2400-2483 MHz, 868-870 MHzWLAN - 2.4 GHzBluetooth - 2400-2483 MHz Solid WiBOX for any outdoor conditions Every WiBOX systems are predicted to use outdoor, they are made of UV resistant ABS plastic material, which is also resistant for bad weather conditions like rain, snow, humidity. Special designed sealing systems guarantees IP67 waterproof level. WiBOX systems can work in any weather conditions, temperature range is from -40°C up to 80°C.Wall or pole mounting Comprehensiveness of WiBOX system installation, WiBOX system can be installed using WiMount mounting system on a pole mast or a wall.Waterproof WiBOX constuction WiBOX system has certified IP67 waterproof level. It predicts the system to be used in any outdoor applications on the mast or on a wall. WiBOX system is equipped with top quality RJ45 wate
VGA monitor desktop KVM switch USB, 4-fold incl. 4x 1.2m cable sets- Max. video resolution: 2048x1536 Pixel- Port selection via Select key or HotKey via keyboard- Permanent mouse emulation at each port- Keyboard status (Num-Lock, ...) cached for each PC separately- No power supply required- small plastic case: 164x72x26mm- incl. 4 cable sets 1.2mKlaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpVGAKaabli pikkus1,2 mMaksimaalne resolutsioon2048 x 1536 pikslitToote värvMustÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)164 x 72 x 26 mmPortide hulk4
The Sprinter KN-3710 becomes Keenetic's most affordable Internet center with Wi-Fi 6, taking the place one step above the Speedster. It has the same gigabit power for routing, AX1800 wireless, and VPN applications as the Hopper (KN-3810), plus a convenient router/repeater switch. The dual-core EN7561DU 900MHz processor inherits the best features of the proven MT7621, while providing more efficient hardware offloading of Wi-Fi 6 wireless transmission. The MT7905 dual-band Wi-Fi chip does not include a spectrum analyzer and Bluetooth, but is combined with the same high-performance FEM - the MT7975 module and printed 5-dBi antennas, which have proven themselves well. The Sprinter can easily handle the role of a single or main gigabit router serving VPN, Internet filters, traffic prioritization and, for example, a Wi-Fi system with several access points and repeaters. On the other hand, thanks to the mode switch, the Sprinter can be turned into a Wi-Fi 6 repeater with a single movement, which will perfectly fit into a gigabit seamless Wi-Fi system without additional settings. Sprinter Wireless Router, Available bandwidth 1800 Mbps Mesh, 4x10/100/1000M Number of antennas 4, Included Accessories Power adapter, Ethernet cable, Instructions for use Dimensions 214 x 154 x 33 mm
One USB keyboard, USB mouse and VGA monitor controls two computers- Automatic KVM-Switch with attached moulded cables- Computer selection via hot key- Easy to install, no software required- Keyboard, mouse and monitor emulation- Audio (speaker) enabled- LEDs for easy status monitoring- No power supply needed- Contents: Switch with 2 integrated KVM cables (each 1.1 m)Kontrollitavate arvutite arv2Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpVGAAudioühendusedJahUSB 2.0 portide arv2Kõrvaklapiväljundite arv2DC-pistikEiVGA (D-Sub) portide arv1Maksimaalne resolutsioon1920 x 1080 pikslitToote värvMustMaterjalPlastVirnastatavEiSisseehitatud ekraanEiHot-Plug tugiEiUSB-jaoturEi