Võrguseadmed

CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5

Anti-noise shield for Ubiquiti NanoStation 5AC Loco antennas. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process, shield is made with needes precision. Shield is made entirely from grey coated aluminium.

Anti-noise shield for MikroTik RouterBOARD wAP. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process, shield is made with needes precision. Shield is made entirely from grey coated aluminium.

1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).

Ubiquiti 802.3af Supported PoE Injector (U-POE-af)

The RB450Gx4 is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD card slot. In addition, it supports full 10 V - 57 V input by two power jacks or PoE (802.3af/ at or passive PoE) and can provide PoE output for Ethernet port #5. It is powered by MikroTik RouterOS. It comes without an enclosure, you are free to use it in your own. The device form factor is identical to our previous RB850 and RB450 series, so you can even use the same enclosures. The device is powered by a quad core ARM CPU, has 1 GB of RAM and supports hardware IPsec encryption. The device is powered by RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RB450Gx4IPQ-4019 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162,51973.4469,91924.71482,6759.1Bridging25 bridge filter rules162,51973.4339,41390.2344176.1Routingnone (fast path)162,51973.4469,91924.71452,6743.7Routing25 simple queues162,51973.4468,31918.2473,8242.6Routing25 ip filter rules162,51973.4235,3963.8231,3118.4

hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.

The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.The enclosure includes slots for directly attaching a hose clamp mount in three different mounting places, with ability to be mounted on horizontal railings. The device includes one 10/100 Mbit Ethernet port. There is also an easily accessilble grounding connection to protect it against lightning.Included parts

Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.

The 16 port Gigabit PoE panel is used 10/100/1000M Ethernet. The upper RJ45 sockets is form “LAN/Switch/PC” 1/2&3/6 are transmitting data. The under RJ45(power+data) socket is to deliver data and power: 1/2&3/6 transmitting data, 4/5(+)&7/8(-) for power. Passive POE iscomposed of 16 set of RJ45 sockets and two 60V DC power jack and 3 PIN din power connector. Input power requests160W or more AC TO DC power converter. The input dc hole diameter is 2.1mm and the other end OD id 5.5mm. And the other pin is 3 PIN(V+,V-,GND)power connector for Input. Each socket provides protection against short overflow (current protection 650mA +15% -15%). The sum total output power must be lower than the MAX input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. The recommended formula for AC-DC power converter is：10W per RJ45 set (1 set = 2 x RJ45sockets). For example, 16 x 10W = 160W for 16 port Passive PoE panel .The configuration size of panel is：1U (height), 19” (width) and 25mm (thickness), as is available to answer market demand and convenient to be installed directly. FEATURES – USE 10/100/1000M Ethernet– Flexible power(DC 12V TO 48V)– Each Port Current Protection (650mA+/-15)– For 19’’ Rack

The SXT LTE kit is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.In comparison with our first generation model RBSXTLTE3-7, the SXT LTE kit is powered by faster CPU and supports not only LTE with more speeds, but also 2G (international model only) and 3G, as well as much wider band range. The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.The device has a built in high quality Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link.RBSXTR&R11e-LTE includes LTE modem that supports International LTE bands 1, 2, 3, 7, 8, 20, 38 and 40LTE category: 4 (150Mbps Downlink, 50Mbps Uplink)3G category: R7 (21Mbps Downlinks, 5.76Mbps Uplink)2G category: Class12

Teltonika FMT100 smart waterproof GNSS tracker with Bluetooth connectivity and internal backup battery. Solid waterproof case and build-in accelerometer & gyroscope sensors with extremely accurate crash trace functionality makes this device perfectly suitable for insurance market solutions.Combined accelerometer & gyroscopeBuild-in accelerometer and gyroscope sensors with extremely accurate crash trace functionality makes FMT100 perfectly suitable for insurance market solutions.Fast & Easy mountingThe biggest high gain GNSS antenna in all FM series devices allows mounting FMT100 device directly on car battery under the hood. For faster and easier mounting FMT100 case is equipped with mounting tape and special clamp connectors for power cable connection to the car battery.Smart Crash detectionEnsure safety of Your employee with smart Crash detection. Get alarm message immediately after accident, save workers life!BluetoothIntegrated Bluetooth 4.0 BLE allows usage of various wireless sensors and grants compatibility with previously available Bluetooth V3.0 features like device configuration, firmware update, headset support. Retrieve temperature and humidity information from Bluetooth sensors without the need of wired connection – reduce installation costs. Make phone calls to your employee via Bluetooth headset – be sure that your employee is always safe and uses hands free headset instead of phone!Advanced antitheft systemPrevent your vehicle from theft with advanced antitheft functionality. Combine Auto Geofencing with new Towing detection functionality.

The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested

Technical Data: Connector type: SMA male Frequency: 698-960MHz 1710-2700MHz Gain: 698-960MHz - 4dBi 1710-2700MHz - 5dBi VSWR ≤ 4 Radiation Omni Material UV Plastic Mount type Wall Cable length 3m

Technical Data: Connector type: N male Frequency: 698-960MHz 1710-2700MHz Gain: 698-960MHz - 4dBi 1710-2700MHz - 5dBi VSWR ≤ 4 Radiation Omni Material UV Plastic Mount type Wall Cable length 3m

The LtAP mini is a small waterproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot, so you can use your own LTE modem of your choice. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. The unit has several powering options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB. LtAP mini has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple tracking application example in the RouterOS documentation, to help you start development of your platform. External GPS antenna is available for ordering separately (not included, product code GPSANT). LtAP mini (RB912R-2nD-LTm) is shipped without LTE card installed (empty miniPCI-e slot), so you can use your own LTE card.

The LtAP mini LTE kit is a small weatherproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity. It is also available separately, without the modem, so you can use your own. Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple tracking application example in the RouterOS documentation, to help you start development of your platform. External GPS antenna is available for ordering separately (not included, product code GPSANT). LtAP mini LTE kit (RB912R-2nD-LTm&R11e-LTE) includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.LTE category: 4 (150Mbps Downlink, 50Mbps Uplink)3G category: R7 (21Mbps Downlinks, 5.76Mbps Uplink)2G category: Class12LTE (FDD) bands 1/2/3/7/8/20 (2100/1900/1800/2600/900/800)LTE (TDD) bands 38/40 (2600/2300)3G bands 1/2/5/8 (2100/1900/800/900)2G bands 2/3/5/8 (1900/1800/800/900)

24x SFP /4x RJ45 1G combo, 4x SFP+ 10GbE, Rack 19"

2G/3G/4G/LTE miniPCI-e card with bands 1/2/3/5/7/8/20/38/40

wall mount adapter for LHG antennas

ATEN 4-Port USB3.0 4K DisplayPort KVMP Switch with Built-in MST Hub (CS1924M-AT-G)

ATEN 2-Port USB3.0 4K DisplayPort KVMP Switch with Built-in MST Hub (CS1922M-AT-G)

APC Rack PDU, Basic, 0U/1U, 100-240V/20A, 220-240V/16A, (13) C13 (AP6020A)

PLANET POE-173 Ultra Power over Ethernet Injector pakub kuni 60-vatist võimsust ja kiiret Ethernet-andmesideühendust kõikjal teie võrguinfrastruktuuris. PLANET Ultra Power over Ethernet lahendus sisaldab kahte täiesti uut toodet: ■ POE-173: 60-vatine Ultra Power over Ethernet-injektor. ■ POE-171S: 12V / 19V / 24V DC Power over Ethernet jaotur.   Kiire ja lihtne Gigabit Ultra Power PoE võrgu juurutamine POE-173 on üheportiline Ultra Power over Ethernet injektor, mis annab kuni 60 vatti võimsust Ethernet-kaablite kaudu. See on loodud spetsiaalselt selleks, et rahuldada kasvavat nõudlust suurema võimsusega nõutavate võrguseadmete järele, nagu näiteks: ■ PTZ Speed Dome ■ AIO (All-in-One) puutearvuti ■ Kaugjuhitav digitaalne kuvar ■ Muud võrguseadmed, mis vajavad normaalseks tööks suuremat võimsust.   POE-173 edastab Ethernet digitaalsed andmed koos 50 V alalisvoolu toitega üle keerdpaarkaabli 60-vattise Power over Ethernet Injectorina ja ühendatud Ultra Power over Ethernet splitter - POE-171S - eraldab digitaalsed andmed ja toite kolmeks valikuliseks väljundiks (12V / 19V / 24V DC), mille kaugus on kuni 100 meetrit.     60 vati võimsus üle 4-poolse UTP-ühenduse POE-173 ja POE-171S Ultra PoE lahendus kasutavad sama kaabeldusstandardit nagu IEEE 802.3at / af PoE. Selle asemel, et anda energiat üle 2-paarilise keeratud UTP - olgu see siis End-Span (Pin 1,2,3 ja 6) või Mid-Span (Pin 4,5,7 ja 8), pakub see võimsust kuni 60 vati võimsuse saamiseks, kasutades kõiki nelja paari standardset Cat5e / Cat6 Ethernet-kaablit. Uues 4-paarilises süsteemis kasutatakse nii andmepaaride kui ka varupaaride toiteks kahte PSE-kontrollerit.     All-in-One ja kompaktse suurusega disain POE-173, mille kontseptsioonid on "lihtne paigaldada", "Plug and Play" ja "lihtne tõrkeotsing" äri- ja kodukasutajatele, on kõik-ühes, üheportiline PoE+ injektor koos sisemise toiteallikaga. Kompaktse suurusega korpuses on POE-173 esipaneelil üks 100-240 V vahelduvvoolu sisendpesa, kaks valgusdioodi (System POWER ja PoE ACTIVE ) ülaküljel ja kaks RJ-45 porti (POE port ja LAN port) tagapaneelil. Lihtsalt ühendage Ethernet-kaablid ja toitejuhe ning POE-173 on valmis pakkuma samaaegselt kiiret võrgukommunikatsiooni ja ülikiire PoE-injektori funktsioone, ilma et oleks vaja tarkvara konfigureerimist.     Kiire ja lihtne kaablite paigaldamine PoE-võrgu kasutuselevõtuks POE-173 ühildub tagurpidi nii 802.3af kui ka 802.3at PoE standarditega ja võimaldab kasutajatel paindlikult kasutada standardseid ja suure võimsusega seadmeid, et edastada andmeid ja energiat üheaegselt ühe Ethernet-kaabli kaudu kuni 100 meetri ulatuses. POE-173 vabastab turva-IP-kaamera ja traadita AP kasutuselevõtu toitepistikupesa asukoha piirangutest ja täiendavast vahelduvvoolu juhtmestikust. See vähendab seega kaablite arvu ja välistab vajaduse elektripistikupesade järele seinal, laes või mis tahes kättesaamatus kohas ning eelkõige vähendab paigaldusaega.

The APOE03GR is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Reset function that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The Reset button feature only work in certain AlfaModels. The APOE03GR features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply.** PD-side Reset circuit available upon request ** Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-

Throughput: 1.6 Memory buffer: 96 MAC address table size: 2048 Supported protocols and standards: - IEEE 802.3 (10Base-T Ethernet)- IEEE 802.3af (Power over Ethernet 802.3at Type 1)- IEEE 802.3at (Power over Ethernet 802.3at Type 2)- IEEE 802.3u (100Base-TX Fast Ethernet)- IEEE 802.3x (flow control, for full duplex mode) Power consumption: 150 Accessories included: - PoE + 8-Port Desktop Switch- Power cable- User Manual Power supply: - Input voltage: 100 - 240V AC, 50 / 60Hz Dimensions: 179 (L) x 280 (W) x 44 (H) [mm] Weight: 1.5

Tootja: DIGITUS

Symmetrical Horn TP Antenna Gen2HORN ANTENNA WITH TWISTPORT™ CONNECTORSymmetrical Horn Antennas have a symmetrical beam pattern with no sidelobes. They offer excellent noise rejection and supreme scalability options. They are perfect for high-density AP clusters and dense radio co-location.The Next Generation Sector Antenna Symmetrical Horn TP Antennas Gen2 feature our industry-changing TwistPort™ connector, a patent-pending quick-locking waveguide port. TwistPort™ is virtually lossless and revolutionary easy to use. Symmetrical Horn TP Antennas Gen2 feature multiple improvements on RF performance and industrial design, incl. optically lighter antenna body and significantly improved antenna bracket. Radome is made of more resistant material and the whole range of Gen2 antennas only uses two different radome sizes.Unique Beam PerformanceSymmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.TwistPortTM ConnectorSymmetrical Horn TP Antennas feature our industry-changing TwistPortTM connector, a patent-pending quick-locking waveguide port. TwistPortTM is virtually lossless: with radios built according to our Reference design, there are no coaxial RF connectors or RF cables that cause signal loss. Connecting radios is brilliantly simple - “twist and lock” - all done with one hand!

TPA-RBC makes the RouterBoard™ M11 series, 9 series, 7 series and 4 series compatible with all TwistPort™ Antennas.TwistPort™ Adaptors are equipped with our proprietary quick-locking waveguide port. TPA-RBC is made of cast aluminium and provides premium protection for MikroTik™ RouterBoard.Frequency Range: 5180 - 6400 MHzPolarization: Dual Linear H + VAntenna Connection: TwistPortTM - Quick Locking Waveguide PortRadio Connection: 2x Right Angle MMCXWhat is TwistPortTM AdaptorAluminium Enclosure

Suitable for 3G/4G LTE Routers to Connect with External Antennas