High power 2192-2732MHz 802.11b/g/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
The RB2011 wall mount kit secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases, protects all ten Ethernet ports, SFP port and Serial port.
CA411-711 is new indoor case for RB411 and RB711 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mounting holes on the back.
3-Axis Positioning SystemBased on ball hinge, 3-Axis positioning is essential feature of NanoBracket Series. NanoBracket SEXTANT enables elevation and azimuth change in range of 50° and full 360° antenna rotation.Easy Installation2nd generation of ball hinge based 3-Axis Positioning System is easy to install. The ease of installation is uncomparable to anything on the market today. NanoBracket SEXTANT enables installation on the Wall or on the Pole.Built To LastNanoBracket SEXTANT is made of diecast aluminium and high quality ABS plastic. All screws are made of Stainless Steel.
The new 5GHz super high power wireless card for long range links and powerful access points. This is the professional choice for reaching the last mile - 800mW transmit power will give you the ability to reach even further than before. Up to 125Mbit throughput is possible with this device! Works in the 5GHz frequency (4800-6075Mhz depending on country regulations) The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment. The card comes with a preinstalled industrial grade heatsink, one MMCX connector and nine LED indicator lights.
Vertically and Horizontally AdjustableAvailable now, the Ubiquiti Networks Window/Wall Mounting kit for NanoStation. The kit comes with interchangeable mounting adapters(suction mount for window, wall screws for wall) so the NanoStation can be easily fitted on a window or wall. Vertically and horizontally adjustable.
Introducing Universal Arm Bracket (UB-AM) by Ubiquiti. Designed for wall or poles, UB-AM provides a versatile and robust solution for mounting all of your devices. Now Shipping.
Current Sensor (mFi-CS) is a clip-on, alternating current (AC) sensor. It is designed for current monitoring of motors, lighting equipment, industrial hardware, or other AC electrical loads. For use with mFi mPort hardware and mFi Controller software (included with the mFi mPort). Connection Type: mFi RJ45. Input Current: 0-100A.
Door Sensor (mFi-DS) is a magnetic switch sensor. It is designed to detect open entry points, such as doors, windows, or other physical enclosures. For use with mFi mPort hardware and mFi Controller software (included with the mFi mPort). Connection Type: mFi Terminal Block.Sensor: Magnetic.
mPort Serial features RS232 serial connectivity through a standard DB9 serial port. Once a machine is connected through the serial interface, the mPort Serial can attach to the IP network using built-in Wi-Fi or Ethernet. From there, a terminal screen can be launched through the mFi controller software to control the connected machine. The mPort Serial also features an external antenna connector to support longer range industrial applications.
AOA-2412 antennas are professionally engineered and manufactured with the highest industry quality at the lowest possible price providing extreme value. AOA-2412 is designed for the 2.4GHz ISM band, supporting 2.4 to 2.483 GHz and provides superb performance in IEEE 802.11b/g WiFi and Bluetooth applications.AOA-2412 includes mounting bracket and hardware for up to 2” OD masts. Made with fiberglass.
AOA-2415 antennas are professionally engineered and manufactured with the highest industry quality at the lowest possible price providing extreme value. AOA-2415 is designed for the 2.4GHz ISM band, supporting 2.4 to 2.483 GHz and provides superb performance in IEEE 802.11b/g WiFi and Bluetooth applications.AOA-2415 includes mounting bracket and hardware for up to 2” OD masts. Made with fiberglass.
AOA-5815 antennas are professionally engineered and manufactured with the highest industry quality at the lowest possible price providing extreme value. AOA-5815 is designed for the 5.8GHz ISM band and provides superb performance in IEEE 802.11a WiFi and Bluetooth applications.AOA-5815 includes mounting bracket and hardware for up to 2” OD masts. Made with fiberglass.
- Simple Power up 8 Passive Gigabit PoE devices by one power source.- Power by DC jack or Terminal Block connector.- Application use for AP, IP camera, IP phones.Input Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100/1000MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
Simple Power up 8 Passive 100Mbps PoE devices by one power source. Power by DC jack or Terminal Block connector. Switch On/Off button to save electricity while not use. Application use for AP, IP camera, IP phones.SpecificationsInput Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
CCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is your best choice. The device is available with a 1U rackmount case, has twelve Gigabit ethernet ports, a serial console cable and a USB port. The CCR1016-12S-1S+ has two SODIMM slots, by default it is shipped with 2GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Product specificationsCPU Cores - 16 CoresCPU speed 1.2GHz per CoreRAM - 2GBLAN - 12x GigabitOperating system - RouterOS L6Max Power consumption - 38WUSB - YesPoE - YesDimensions - 355x145x55cm
2.4Ghz 5dBi Dipole antennas with RPSMA connectors. Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
FeaturesEfficiency Over 75%Over-Voltage Protective InstallationShort-circuit Protective InstallationProtection Type: Auto-RecoverOperating Temperature 0C~+40CSpecificationsOutput Voltage 24 VOutput Rating 2A Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
The QRT-5 is rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 23dBi antenna and a super high power 5GHz wireless transmitter.Inside is a new dual chain wireless device, with high performance, high output power wireless transmitter, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless.Easy to use and quick to deploy, QRT is ideal for point-to-point links.
The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS.
The RB911-5HnD is a small wireless router with an integrated high power 5GHz wireless card. The integrated wireless card is capable of up to 1000mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.
A super low loss RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
Compatible with Mikrotik Cloud Core Routers, Cloud Router Switches, RB2011 Series, RB260GS Series and also compatible with most Gigabit SFP ports available on various networking devices.
Bracket for Ubiquiti AirCam:- Seamless Camera Positioning Using Ball Hinge- Quick & Easy Installation- Improved Picture Stability- Outdoor or Indoor Use- Wall or Pole Mounting- Casted Aluminium Bracket
RockShield™ is the rock-solid shielding enclosure for Ubiquiti Net works™ Rocket™ radio. RockShield sets new standards in compactness, comfort of use, features and cost effectivity. Give your network more breath – install RockShield™ with every unshielded Rocket™ Radio!MaterialsRockShield™ Body - Die Cast and Extruded Aluminum Bracket - UV stabilized and weather resistant ABS plastic Hardware - Stainless Steel.Compatible Wireless PlatformsUbiquiti Rocket M2, Rocket M3, Rocket M365, Rocket M5, Rocket M900.
UbiBracket™ Universal is a holder, designed for the installation of the most popular CPE devices on the market - NanoStation /both older and newer version/, NanoStation Loco, NanoStation M, NanoStation Loco M from Ubiquiti Networks, StationBox and StationBox Mikro from RF elements, Airmax from Airlive, and TP-Link TL-WA7510N and TL-WA5210G. UbiBracket™ is original design and development of RF elements. UbiBracket™ Universal is made of durable UV-stabilized ABS plastic and allows easy and quick installation of the device on a wall, pole or a console. Installation of the UbiBracket™ Universal is really simple. The holder is mounted in the closest possible position to the center of gravity of the mounted device, what makes the construction more stable. The color of the holder match perfectly with the color of the NanoStation and StationBox, therefore the construction looks really compact.
Scotch Super 33+ on T1-klassi elektriteip. Mõeldud juhtmete ja kaablite elektriühenduste isoleerimiseks kuni 600V ja max 105°C. Omadused: • Väga hea mehaaniline vastupidavus, samuti niiskusele, kemikaalidele. UV-kindel. • Väga head elektrilised omadused Tehnilised andmed: (ASTM D1000): • Värv: must • Materjal: PVC • Paksus: 0,18 mm • Murdumiskindlus: 250 % 22 °C, 100 % -18°C • Kleepuvus: 794 g/25 mm, teras • Temperatuurivahemik: • Paigaldamine: min -18°C (CSA) • Pidevalt: max105°C (CSA), 80°C (UL510) • Tulekindlus: isesumbuv (UL510) • Läbilöögipinge: 8750 V • Sertifikaadid: UL 510, CSA, FI Paigaldamine. Scotch Super 33+ paigaldatakse samamoodi kui vinüülteipe üldiselt. Mähkige vähemalt kaks kihti 50% kattuvusega. Venitage veidi teipi enne mähkimist, et teip jääks tihedalt vastu isoleeritavat pinda. Viimast kihti mitte venitada, see väldib teibi lahtikerimist. Valige sobiv teibi tüüp vastavalt ümbritsevale temperatuurile. Tavatingimustes võib kasutada ka odavamat T2 klassi elektriteipi Scotch 710 või T3 klassi Temflex 1500. Raskemates tingimustes kasutage paksemat Scotch Super 88 elektriteipi.
Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.
Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.
