TL-SG105PP-M2 5-Port 2.5G Desktop Switch with 4-Port PoE++ - 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports - With four PoE++ ports, transfers data and power on one single cable - Works with IEEE 802.3af/at/bt type3 compliant PDs - 802.1p/DSCP QoS enable smooth latency-sensitive traffic - Supports PoE Power up to 60 W for each PoE++ port - Supports PoE Power up to 123 W for all PoE ports - PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices - Plug and Play, no configuration and installation required
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
RouterBoard 1100AHx4The RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network.1U Rackmount CaseUnit comes with 1U rackmount case, The RB1100AHx4 feature two IEC failover power connectors, support 802.3at PoE input and also have a DC telecom power connector for -48 V DC powering.Fast Internet SpeedNew RB1100AHx4 has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbps.The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost low bandwidth cellular connection it is supported by countless mobile operators around the globe.KNOT can monitor onboard GPIOs convert Modbus protocol to TCP and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes the KNOT brings wireless connectivity to wired sensors such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day!KNOT features so many protocol support and connectivity options: 2.4 GHz wireless Bluetooth 2x 100 Mbps Ethernet ports with PoE-in and PoE-out Micro-USB. Maximum convenience at the lowest cost! With the Bluetooth interface you can use the KNOT for asset tracking and telemetry based on Bluetooth advertisement packets. KNOT supports any BLE tag that sends advertisement data. iBeacon Eddystone or any other format. It has powerful filters for forwarding only relevant packets and ignoring others.KNOT is a great tool for most outdoor cabinet IoT applications as well. It comes with a DIN rail mount that allows easy integration with all kinds of setups: from agriculture and asset tracking to cold chain monitoring industrial manufacturing and so on.
Xiaomi Router AC1200 EU 802.11ac, 300 + 867 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support No, MU-MiMO Yes, No mobile broadband, Antenna type 4 External Antennas
Full-speed Wi-Fi 6, 3000 Mb/s wireless speed 2+1 5 GHz band antennae Xiaomi's self-developed Mesh technology New-generation 12nm dual-core 1.3GHz processor NFC one-touch connection IPTV The Xiaomi Router AX3000T takes your home network to a new level with advanced dual-band Wi-Fi 6 technology. Experience impressive speeds of up to 2976 Mb/s and excellent coverage that allows you to surf, stream and game seamlessly.Dual-band Wi-Fi 6 with 2976 Mb/s speedThe AX3000T supports dual-band Wi-Fi 6 and offers a combined speed of up to 2976Mb/s. This allows you to connect multiple devices simultaneously and use data-intensive applications without experiencing any loss of speed. Ideal for modern households where streaming, online gaming and remote working are part of everyday life.Optimized coverage with 3 5 GHz Wi-Fi antennasWith three 5 GHz Wi-Fi antennas, the router supports 3T3R at 5GHz and offers better coverage than conventional AX3000 routers. This ensures a stable and fast connection in every corner of your home, even in large apartments or houses.Gigabit Ethernet ports for maximum speedThe Xiaomi Router AX3000T is equipped with four Gigabit Ethernet ports that enable network speeds of up to 1000 Mb/s. This means you can connect wired devices such as PCs, smart TVs or gaming consoles without any loss of speed.Xiaomi Mesh for extended Wi-Fi coverageThe AX3000T supports Xiaomi Mesh and can create a mesh network with other Wi-Fi 6 Xiaomi routers. This strengthens the Wi-Fi coverage and ensures that you have a strong and reliable connection in every room of your home.1.3 GHz dual-core processorThe new-generation processor adopts an advanced 12nm manufacturing process surpassing the performance of similar products, and combining high performance and low power consumption to ensure super stable operation. Hardware acceleration is enabled to further reduce CPU usage for enhanced stability, reliability, and performance, perfect for online gaming.Large 256MB memory can provide stable connection for up to 128 devicesSmartphones, televisions, speakers, cameras, and more. Stable connections for all your devices with real-time responses and no mutual interference give you an improved smart experience throughout your homeEasy connection with NFCThanks to the NFC function, you can connect to the network with a simple touch on Android devices without having to enter a complicated password. This makes sharing the network with friends and guests much easier.IPTV enabledXiaomi Router AX3000T supports IPTV single-line multiplexing, simplifying your home wiring for a seamless streamlined operation.Exclusive acceleration for Xiaomi smartphonesXiaomi/Redmi smartphones are automatically recognized and provided with an exclusive acceleration pathway for gaming and video scenarios. By prioritizing the speed and stability of the network, latency and lag are effectively reduced for a smoother experience.More technical support Dual-band integration: Automatically select the most suitable band access. No need to worry about choosing the fastest node WPA3: Next-generation security and encryption standards. Home protection network security. Beamforming: Automatically detect device location. Directional signal enhancement for greater coverage. IPv6: More addresses. Greater forwarding efficiency. BSS Coloring: Rational algorithm optimization. Reduce interference between Wi-Fi routers.
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
RUT951 took the best features from one of the most popular Teltonika Networks cellular routers - RUT950. This device features dual SIM 4G cellular connectivity combined with Wi-Fi and 4 Ethernet interfaces to meet the needs of the most varied IoT solutions. Automatic WAN failover to an available backup connection ensures network continuity and eliminates downtime. Powered by RutOS that offers customization options for professional use, automation features, and top-level security for your solution. Compatible with the Teltonika Networks Remote Management System (RMS) enables secure remote management to save time and expenses.
Xiaomi Mesh System | AC1200 EU (2-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
Build and expand your network with the UniFi® Switch, part of the UniFi Enterprise System. The UniFi Switch, model USW-Flex, is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices.The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.Managed and configured by the UniFi Controller or UniFi Mobile app, the UniFi Switch Flex offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere. PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installed horizontally or vertically making it ideal for desktop, magnetic wall-mount, and pole-mount installations. Indoor/Outdoor Design The USW-Flex is designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options, the USW-Flex provides both flexibility and durability for environments with extreme temperature variations. Compatible Products The USW-Flex powers a variety of products, including the UniFi Video Camera G3 Flex, UniFi Video Camera G4 Pro, and UniFi AC Mesh AP, which use 802.3af PoE. To enable its maximum power budget of 46W, the USW-Flex can be powered by the USW-Industrial switch, which provides 60W of 802.3bt PoE++. Seamless Integration A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts.
TSW202 on esimene Teltonika Networks'i hallatav PoE+ kommutaator, mis on loodud selleks, et pakkuda granuleeritud võrgu haldamise võimalusi, tsentraliseerides samal ajal voolu jaotamist. See PoE+-lüliti võimaldab paindlikkust lahenduse haldamisel ja toiteallikaga varustamisel ning parandab M2M-sidet, toetades paljusid tööstuslikke protokolle, sealhulgas EtherNet/IP, Profinet ja MRP. TSW202-l on 2 suure jõudlusega SFP-porti pikamaa valguskaabelühenduseks ja 8 Gigabit Ethernet-porti, millest igaüks pakub 30 W võimsust. HALDATAVAD VAHENDIDL2 koos täiendavate L3-funktsioonidega täiustatud haldamiseks ja kontrollimiseksPOE+ JA SFP8-portiline PoE+ kommutaator koos 2 SFP-portiga valguskaabelühenduseks PROFINET JA MUUDToetab Profinet'i automaatseks andmetöötluseks koos teiste protokollidega, nagu EtherNet/IP ja MRP.TSWOSTeltonika Networks OS kommutaatoritele, intuitiivselt kujundatud lõpmatute konfiguratsioonide jaoks.
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
Võimenda on WiFi võrku - Archer AX55 lubab järgmise põlvkonna WiFi 6 kiiruseid (2402 Mbps 5 GHz ja 574 Mbps 2.4 GHz). • Mitu töökindlat ühendust - OFDMA tehnoloogia sobib efektiivseks kasutamiseks mitme seadmega ja tagab kuni 4x suuremad kiirused kui tavalised AC ruuterid. • Ultra-madal latentsus - kuni 75% madalam latentsus võimaldab palju paremat mängimist ja videokõnede tegemist. • Sujuvam ühendus - neli antenni ja Beamforming tehnoloogia ühendab seadmed automaatselt parima saadaoleva WiFi-sagedusega. • USB 3.0 pesa abil saad luua näiteks personaalse pilvepõhise andmesäilituse koha. • Laste kaitsmise funktsioon, uute võrguühenduste teavitused ja palju muud.
