USB-C 100W CableA long USB cable compliant with the Power Delivery standard that allows you to power devices with 100W, which allows you to quickly charge laptops. The 90-degree angled plug allows you to nicely route the cable along the laptop case.High quality workmanshipThanks to the braiding, the cable does not get tangled and looks very aesthetically pleasing. The 2-meter length means you don't have to place your laptop close to a power outlet.VersatileThe cable supports the data transfer and device charging function. Support for Quick Charge 3.0 and Power Deivery 3.0 technology allows you to quickly charge devices.
Lihtne kinnitamine otse monitorile: Mi Computer Monitor Light Bar kinnitub otse monitorile ega võta töölaual kübetki ruumi. Asümmeetriline viimistletud disain: Valgusti disain on peensusteni läbimõeldud, nii et see ei tekita ekraanil peegeldusi ning tagab mugava töötamise ka pikkade töötundide vältel. Kõrge Ra95 värviedastusindeks: Valgusti värviedastusindeks küündib kuni Ra95, tagades loomutruud värvid ja detailid. Võbelusevaba tehnoloogia vähendab ka pinget silmadele. Vähem takistusi, rohkem vabadust: Koos lambiga on komplektis mugav juhtmevaba juhtpult, millega saab muuta valguse temperatuuri ja eredust. USB-C ühendus: Monitoriga ühenduses olles läheb valgusti automaatselt tööle, kui arvuti sisse lülitad. Valguse reguleerimine: 2700K - 6500K
Original part number DK-1511-V-305 /DK-1511-V-305-1 Product name DIGITUS CAT 5e twisted pair installation cable 305m Producer DIGITUS Class of product Installation network cable Wire type UTP - unschielded twisted pair cable, 4 pairs Category 5e Coating type PVC - polyvinyl chloride Length 305 m Colour Grey Gross weight 9 kg Packaging type box 305m
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
Toetab kuni 10 kg raskust Kasutamiseks 450 mm varda ja 700 mm vardaga (ei kuulu komplekti) Vastab VESA paigaldusstandarditele (75 x 75 mm ja 100 x 100 mm) Tugev, kerge metallkonstruktsioon vastupidava pulbervärvitud hõbehalli viimistlusega Pole kaasas Pange tähele: ülaltoodud pilt on näidatud ainult illustratiivsetel eesmärkidel. Varras ei kuulu komplekti ja tuleb eraldi osta. Saadaval on kaks versiooni: 450 mm lauaklambri pulk ja 700 mm lauaklambri pulk. Vaadake allpool tüüpilisi paigaldusnäiteid.... See LCD-klamber on osa meie ainulaadsest hõbedasest modulaarsest lauaarvutikinnitussüsteemist, mis loob kohandatud lahendusi teie sülearvutite ja kuvarite paigaldamiseks erinevates konfiguratsioonides.
The HDMI extender kit extends the range of Full HD audio/video signals to a distance of up to 70 m, and the range of 4K / 30 Hz signals can be extended to a distance of up to 40 m with a CAT6 (or higher specification) network cable. The transmitter module is equipped with an HDMI output for connecting a local monitor. Thanks to PoC (Power over Cable) technology, only the transmitter needs to be connected to the power supply. Infrared (IR) signal transmission allows you to conveniently control the signal source using the remote control from the receiver (on the output screen). The scope of functionality also includes the function of copying the EDID of the output screen in the receiver or on HDMI-Loop Out, which can be selected using a switch. Extends the range of the HDMI audio-video signal to a distance of up to 70 m Supports resolutions up to 4K/30Hz, 4:4:4 HDMI 1.4, HDCP 1.4, DVI 1.0 Support for CAT 5e, CAT 6, CAT 6A, CAT 7, CAT 8 network cables Audio support: Up to 7.1ch HD audio PoC (Power over Cable) - only the transmitter requires an external power supply Loop-Out/HDMI output - connect a local monitor to the source device EDID copy function of the output screen in the receiver or on HDMI-Loop Out Infrared signal transmission (two-way) An infrared (IR) signal interface allows remote control of the input source via the output screen Suitable for wall mounting Metal housing
StarTech.com ST121SHD30. Tüüp: AV transmitter & receiver, Maksimaalne resolutsioon: 1920 x 1080 pikslit, Toetatud kaablitüübid: Cat5e,Cat6. Ühenduvustehnoloogia: Juhtmega ühendatud. Vastuvõtja mõõdud (l x s x k): 45 x 82 x 22 ...
CAT 6 lapik võrgukaabel, U/UTP Ideaalne vaipade alla või põranda põrandaliistude taha. unshielded LAN/network cable to connect network components with 2 x RJ45 connectors Low bending radius, extremly flexible, ideal to move to save space behind baseboards OD only 1.5 x 6 mm with gold plated PINs short connector type without latch protection on strain relief pair-sequence acc. to EIA/TIA 568B
XL-monitoride kinnitus suurustele 17–49 tolli (43–124 cm), maksimaalne kandevõime 20 kg, tugevdatud kinnitus rasketele mänguri- ja kumeratele monitorideleRaskekaalu meister keerulisteks väljakutseteks: Kuni 20 kg kandevõimega monitorihoidik tõstab vaevata raskeid mängurimonitore, ultralaiu ja kumerate ekraane. Kvaliteetne gaasisurvevedruga mehhanism võimaldab monitorihoidiku sujuvat reguleerimist, et saavutada täiuslik asend igal ajal ilma igasuguse pingutuseta. Kompaktne alus vabastab tööpinnal ruumi ja hoiab töölaua korras tänu integreeritud kaablite haldussüsteemile.Tugevdatud monitorialus XL-mõõdus monitoride turvaliseks kinnitamiseks mängurite ja kontorikasutajate jaoks: õhukese alusega vastupidav metallist hoidik on ruumisäästlik lahendus tööpinnale.Ideaalne stabiilseks lauale kinnitamiseks, sobib ekraanidele kuni 20 kg, kõrguse reguleerimisega, ±90° pööratav, +50°/-20° kallutatav, 180° pöörlemisvõime, soovitatav lauaplaadi paksus: 12–50 mm.Kasutajasõbralik paigaldus: kinnituskruvi on kergesti ligipääsetav laua pealt, vältides keerulist kinnitamist laua alt ja raske mööbli liigutamist.Gaasisurvevedruga mehhanism võimaldab monitori ergonoomilise asendi kiiret ja lihtsat kohandamist, olgu see tööks, mängimiseks või videokõnedeks.Lihtne ja kiire paigaldus: võimalik kinnitada kas puuritud kruvikinnituse või eemaldatava lauaklambriga, mis ei jäta jääke.Eemaldatav, VESA®-ühilduv kinnitusplaat võimaldab monitori hõlpsat vahetamist ilma tööriistadeta.Monitorihoidik ühildub VESA® standarditega 75x75 mm ja 100x100 mm.
Original part number CCP-USB2-AM5P-1 Product name Gembird USB 2.0 A-plug MINI 5PM 1ft cable, bulk packing Producer Gembird USB plugs 1x male USB A-type1x male mini-USB CANON-type (5-pin) Cable length 0.3 m Other information Other information Gold plated plugs No Cable colour Black Additional information Cable length 30cm
Tootja: Gembird Tootegrupp: muu controllers/adapters BUS tüüp: PCI-E 4x sisemised ühendused: 1 x M.2 välised pordid: info puudub toetatud operatsioonisüsteemid: Windows 10 kaasasolev tarkvara: info puudub madala profiiliga kaart: Jah pikkus: 101 mm laius: 55 mm kõrgus: 12 mm Netokaal: 50 g Lisaandmed: PCI-Express M.2 adapter add-on kaart, M.2 Flash mälu moodul in 2280, 2260 või 2242 format can be connected, OS independent, no driver installation necessary , toetab NVM Express (NVMe), toetab M.2 SSD mooduls in format 2280, 2260 ja 2242 koos key M või key B+M, Ühendusi
Dimensions: 7,2 x 6,7 x 2,3 cm Accessories included: HDMI video extender transmitter Receiver HDMI video extension cable Power supply: DC 5V / 2A Infrared transmitter Infrared receiver User manual Other features: HDCP 1.2a support Bandwidth: 4.95 Gbps Color depth: 8 bits It supports uncompressed audio signals, such as LPCM Metal housing Compact dimensions, simple operation and installation Power supply: DC 5V / 2A
Selle Delocki adapteri saab ühendada arvuti või sülearvutiga USB 3.0 liidesega ning see laiendab teie arvutit ühe monitori pordi ja Gigabit LAN liidese ja USB 3.0 liidesega. Adapteriga saate ühendada HDMI-monitori ja VGA-monitori, kuid see toetab korraga ainult ühte pildiväljundit, seega on nähtav ainult HDMI-monitoril. Spetsifikatsioon • Ühendused: Sisend: 1 x USB 3.0 A-tüüpi isane Väljund: 1 x HDMI-A 19 kontaktiga emane 1 x VGA 15 kontaktiga emane 1 x Gigabit LAN 10/100/1000 Mbps RJ45 pesa 1 x USB 3.0 Type-A emane • Kiibistik: DisplayLink DL-3700 • Adapteriga kasutatav ainult 1 monitor • Eraldusvõime kuni 2048 x 1152 (olenevalt süsteemist ja ühendatud riistvarast) • Toetab 16-bitist ja 32-bitist värvi • Kasutatav kuni 6 adapterit arvuti kohta • Integreeritud RAM 512 MB (SDRAM) • Säte: laiendatud, peegeldatud, põhiekraan • USB 3.0 kaabel otse adapteril (pikkus ca 6 cm) • Mõõdud (PxLxK): ca. 125 x 55 x 17 mm
The adapter by Delock enables the connection of additional HDMI monitors, projectors, etc. to a PC or laptop via USB Type-A connector. Up to 6 adapter on one computer and connected each additional monitor by one adapter. The adapter can mirror and extend the display and supports a resolution of up to 2048 x 1152. TV and video transmission will be displayed in HD quality. Specification • Connectors: Input: 1 x USB 3.0 Type Micro-B female Output: 1 x HDMI-A 19 pin female • Chipset: DisplayLink DL-3500 • Transfer of audio and video signals • Resolution up to 2048 x 1152 (depending on the system and the connected hardware) • Supports 16 Bit and 32 Bit colour • Up to 6 adapter per computer useable • Integrated RAM 512 MB (SDRAM) • Setting: extended, mirrored, primary display • Dimensions (LxWxH): ca. 85 x 55.7 x 18 mm • Current consumption: ca. 340 mA • Resolution (depending on the system of the PC or laptop) e.g.: 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 768 1280 x 800 1280 x 1024 1366 x 768 1400 x 1050 1600 x 1200 1680 x 1050 1920 x 1080 1920 x 1200 2048 x 1152 System requirements • Windows XP/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 • PC with one free USB 3.0 or USB 2.0 port • Pentium 4, 1.2 GHz CPU or above • Minimum 512 MB RAM • Graphics card with minimum 512 MB memory • Minimum 30 MB free HDD space Package content • USB 3.0 to HDMI Adapter • USB 3.0 cable • Driver CD • User manual
USB-C PD kiirlaadija Nano (65 W), must pistikuadapter 1x USB-C pordiga (Power Delivery) Ülikompaktne disain, suur võimsus, suur energiatõhusus ja multifunktsionaalne USB-C port - kõik koos ühes laadimisadapteris. Väike elektrikuut on ideaalne toiteallikas kodus ja teel olles, laadides usaldusväärselt ja kiiresti kõiki seadmeid, alates Bluetooth-kõrvaklappidest kuni sülearvutiteni. Tänu võimsale 65 W võimsusele ja mitmekülgsele USB-C-ühendusele sobib laadimisadapter peaaegu iga seadme jaoks - nutitelefonidest kuni suure võimsusega sülearvutiteni. USB-C-laadija annab voolu sülearvutitele, näiteks MacBookile, ja laeb USB-C Power Delivery'i kaudu isegi nutitelefone suure kiirusega. GaN-tehnoloogiaga pooljuhid võimaldavad kiiremat ja tõhusamat laadimist ning tavapäraste laadijatega võrreldes kergemat ja kompaktsemat disaini Ruumisäästlik, kerge ja paindlik - USB-laadija on nutikas laadimisalternatiiv sülearvutite suureformaadilistele tavapärastele toiteallikatele. Ülikompaktne ja kerge disain mahub igasse kotti ning teeb USB-C-toiteploki reisil olles käepäraseks valikuks Seinalaadija ühildub selliste nutitelefonide kaubamärkidega nagu Apple, Samsung, Xiaomi, LG, Huawei ja tahvelarvutitega nagu Apple iPad või selliste populaarsete tootjate nagu Acer, HP, Fujitsu ja Razer sülearvutitega.
Tootja: LogiLink Tootegrupp: USB hub ports: 3 Supported USB standards: USB 3.1 (Type-C) maksimaalne external transmission speed: 5 Gb/s Lisaandmed: Ultra õhuke disain, 3x USB 3.0 Typ A, 1x USB-C, 1x USB-C male kaabel, Backward compatible to USB 3.0 / 2.0 / USB 1.1, toetab USB 3.1 Gen 1 standard (Thunderbolt 3 compatible) , ja high-speed data transfer rate Kuni 5 Gbps, tugi 10/100/1000Mbps Gigabit Ethernet, tugi suspend mode ja remote wake up via link-up (WOL), , magic packet või external pin, tugi automatic loading of ethernet ID, USB descriptors, ja adapter configuration from EEPROM after power-on initialization, Compatibel koos Mac OS / Windows, Dimension Lisainfo: andmeleht
Key Features ???? 8K Ultra HD Resolution – Supports up to 8K@60Hz and 4K@120Hz, delivering crisp, vibrant images for movies, gaming, and presentations. ⚡ Fiber Optic Technology – Enables long-distance signal transmission (up to 30m) with no loss or interference, outperforming standard copper HDMI cables. ???? Immersive Audio Support – Compatible with Dolby Atmos, DTS:X ???? Durable Aluminum Shell – High-quality aluminum connectors protect against corrosion and ensure long-lasting durability. ???? High-Strength Construction – Nylon braided exterior adds flexibility and prevents tangling or damage. ???? Next-Gen Gaming Compatible – Perfect for PS5, Xbox Series X/S, and gaming PCs, supporting VRR, ALLM, and Dynamic HDR. ???? Universal Compatibility – Works with 8K/4K TVs, monitors, projectors, laptops, and sound systems. Specifications Model: HD183 Length: 30 Meters Resolution Support: 8K@60Hz / 4K@120Hz Bandwidth: 48Gbps Connector Type: HDMI Male to HDMI Male (Aluminum Shell) Cable Type: Fiber Optic Audio Support: Dolby Atmos, DTS:X
Original part number AK-1201-S Product name Lanberg cable management panel type A, 19", 1U, grey Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Cable management Additional information Cable management panel 1U type ARAL7035 Height 5 cm Width 6 cm Depth 49 cm Net weight 0.544 kg Colour Grey
Kinnitage lihtsalt oma laua või töölaua alumisele küljele 360° pööratav ja laua alt väljatõmmatav kuni 140mm Sobib igale tööpinnale paksusega 15mm ja rohkem Sobib arvutitele, mille mõõtmed on: (LxPxK) umbes 160-220 x 450 x 340-490 mm See roostekindlast pulbervärvitud terasest valmistatud arvutihoidik võib kaaluda kuni 30 kg. Värvus: must
The Alzare Neo Duo isn’t just about holding two monitors; it’s about elevating your entire setup. With two independently adjustable gas spring arms, you get total control over screen positioning, landscape, portrait, or both, and a seamless look that ties everything together. The durable full-metal construction and color-matching options let you create a clean, unified aesthetic that works perfectly with Arozzi desks, PC holders, and accessories. Whether you’re setting up a productivity powerhouse or a bold dual-screen battlestation, the Neo Duo combines precision with visual harmony. Dual gas spring arms with smooth, independent motionAvailable in multiple colors to match Arozzi desks and accessoriesVESA 75x75 & 100x100 compatibility with quick-release platesSupports 17"–34" monitors up to 9 kgTilt range: +45° / -45°Swivel range: +90° / -90°360° screen rotation360° arm rotation with optional 180° lock screwsAdjustable gas spring tension for each armRemovable VESA plates for easy installationIntegrated, tool-free cable managementMounting options: Grommet or C-clamp (both included)
Creality Falcon A1 10W Laser Engraving MachineCreality Falcon A1 is an advanced 10W laser engraving machine that guarantees high quality cutting. Thanks to its integrated camera and intelligent material recognition, using it will not be a problem for you. The Falcon A1 offers a workspace of 305 × 381 mm and a maximum working speed of up to 600 mm/s . What's more, it works with a wide range of materials - from wood and acrylic, to glass and leather, to metal or jewelry.Ready to work without complicated setupThe Creality Falcon A1 comes pre-assembled and calibrated, saving up to 95% of the time needed to get the device ready for use. This is a huge convenience, especially for novice users or those who want to start working immediately after unpacking. Everything works on a plug & play basis - just plug in the power, insert the material and start engraving.Precision camera and intelligent material recognitionThe device is equipped with a full-range HD camera that gives an accurate view of the entire work area. The camera is calibrated at the factory, making material positioning and project preparation extremely easy. In addition, it automatically recognizes materials using a QR code system and independently selects the optimal laser operation settings, eliminating the need for manual configuration.10W power and one-step cuttingThanks to its dual laser beam technology, the Falcon A1 can cut as much as 9.6 mm of acrylic or 6 mm of wood in one go. This not only saves time, but also guarantees precise cutting without the need for repetition. The laser's precise spot (0.06×0.08 mm) makes it possible to make highly detailed engravings - ideal for both personalizing items and creating artistic designs.Fast and smooth operation thanks to the CoreXY systemThe high speed of operation (up to 600 mm/s) is made possible by the CoreXY motion mechanism. This system is based on two motors that ensure smooth and stable head movement, which translates into speed without sacrificing precision.Various application possibilitiesFalcon A1 can handle a variety of materials: wood, acrylic, glass, leather, metal, fabric, plastic or jewelry. As a result, it can be used for personalizing objects, creating decorations, engraving on cylindrical surfaces (with the help of an additional rotary kit), as well as for precision cutting.Additional accessories for even more convenienceYou can upgrade the Falcon A1 with a rotary kit that allows you to engrave cylindrical objects - such as glasses, bottles or cups. There's also a HEPA-filtered air purifier that removes 99.97% of pollutants, improving the comfort of working in closed rooms. Creality also offers a wide range of proprietary materials, tailored for compatibility and engraving quality.Full compatibility and intuitive operationFalcon A1 works with the popular LightBurn, LaserGRBL and Falcon Design Space software and runs under both Windows and macOS. It supports files in jpg, png, bmp, svg, dxf and many other formats, allowing you to work seamlessly with a variety of graphic designs.IncludedLaser engraving machineTubeClampAir Assist moduleSilicone tubePower supplyLime plywood (300×300×3 mm) + QR card for materialsTest calibration cardCable for connecting the rotating setMulti-level focusing blockUSB-A to USB-C cableAnti-static brushAllen wrenchUser manualMounting tools (M1.5 / M2 / M2.5 / M3 allen keys, tweezers, dust-free cloth, protective lens, adapter from USB-A to USB-C, safety keys x2) ManufacturerCrealityModelFalcon A1Laser spot0.06 × 0.08 mmPower max.120 WLaser wavelength455 ±15 nmOptical power10 WLaser classClass 1 (FDA)Device dimensions567 × 468 × 196 mmEngraving softwareLightBurn, LaserGRBL, Falcon Design SpaceWeight of the device15.5 kgOperating systemWindows / macOSInput voltage100-240 V, 50-60 HzSupported file formatsjpeg, jpg, png, bmp, svg, dxf, etc.Output voltageDC 24V/5.0ASupported materialsCardboard, wood, bamboo, rubber, leather, fabric, acrylic, glass, plastic, etc.Operating temperature5°C - 35°CEngraving platform305 × 381 mmLaser sourceLaser diode
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1x naissoost USB 3.0 A-type 2-ühenduse tüüp: USB 3.1 Type-C (male) värv: must Lisaandmed: Enables connecting any standard USB 3.0 või 2.0 device to new type-C USB ports, liides
Arvutiga töötades tagab õige tool ja õige laud võimalikult ergonoomilise positsiooni. Sama oluline on tegelikult ka monitorijalg, mis võimaldab ekraani tõsta täpselt õigele kõrgusele. See aitab vältida võimalikke kaela- ja seljavalusid. Sobib ekraanidele vahemikus 17 "-32"
The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.
DisplayPort -> HDMI active cable - adapter AXAGON RVD-HI14C2 to connect HDMI monitor/TV/projector to the computer with the DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. It is an ideal solution - you don't need a HDMI cable and converter. With this active cable everything is integrated into one compact unit. The cable is only one-way, i.e. DisplayPort to HDMI, not otherwise. Input: DisplayPort v1.2 DP male connector with latch (M) connector latch control button Output: HDMI v1.4b HDMI A (M) male connector Supported resolutions:Resolution and frequency depend on monitor and graphics adapter. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection / disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 1.8 m weight only 70 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by a cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDMI cable length 1.8 m, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The TP-Link UC430 V1 USB hub is an efficient solution for expanding connectivity options while maintaining a compact design. With a USB-C power pass-through port and three SuperSpeed USB 3.0 ports, it allows users to connect multiple devices seamlessly. The product features an optimal operating temperature range between 0°C to 40°C and ensures reliable performance in humid environments, making it suitable for various settings.Designed with practicality in mind, this desktop hub supports OTG (On-The-Go) connectivity, ideal for on-the-go users who need quick access to data transfers. Enhanced by Plug-and-Play compliance, the UC430 V1 can be easily set up without requiring additional drivers, catering to users looking for convenience and reliability in device connectivity.
Original part number 336314 Product name Manhattan Extension Cable USB 2.0 A-A M/F 1,8m Silver Producer Manhattan Class of product Cables - USB | FireWire | PS/2 | (e)SATA | ATA Basic information Basic information USB plugs 1x male USB A-type1x female USB A-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Silver Additional information Lifetime Warranty More info www.manhattan-products.com [LINK]
Allows IR equipment to be controlled up to 250m away!This extender allows IR signals to be transmitted distances of up to 250m using low cost and easy to install CAT5e/6 network cable. It‘s an ideal solution for industrial, commercial, education and home cinema installations and is suitable for use with any IR remote control. Consists of two units - and extender and receiver Supplied with 6 IR 'eyes" which can be connected to the extender and receiver for versatile installation options 5 x IR Output por
