StarTech.com USB2CC1MR. Kaabli pikkus: 1 m, Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: 2.0, Konnektori sugu: Meessoost/meessoost, Maximum data transfer rate: 480 Mbit/s, Pistmikukontaktide kate: Nikkel, Toote värv: Must
MRCS157 | 3 m | HDMI Type A (Standard) | Male | HDMI Type A (Standard) | Male | Product colour Black | HDMI Ethernet channel Yes | Connector contacts plating Gold
MRCS155 | 3 m | HDMI Type A (Standard) | Male | HDMI Type A (Standard) | Male | Product colour Black | HDMI Ethernet channel Yes | Connector contacts plating Gold
Kirjeldus Ühendab ühe 4K HDMI allika kahe 4K Ultra HD HDMI kuvariga Toetab kuni 4K 3840x2160 @30Hz resolutsiooni Toetab HDMI audio läbipääsu USB toiteallikas lihtsaks ja diskreetseks paigaldamiseks 2-aastane garantii Lindy 2 Port HDMI 10.2G Splitter on kompaktne ja soodne lahendus ühe 4K HDMI allikaseadme hõlpsaks jagamiseks kahele 4K HDMI ekraanile. Toetades kuni 4K 3840x2160 @30Hz resolutsioonide, saab sisu vaadata suurepärase selgusega kahel ekraanil. Jaoturi kompaktne disain ja võimalus saada toide USB-st võimaldab lihtsat ja diskreetset paigaldamist erinevatesse keskkondadesse, alates kodusest meelelahutusseadmestikust kuni kontorikasutuseni.
Philips HDMI kaabel tagab Ultra HD 4K resolutsiooni 60 fps juures. See toetab täielikku 32-kanalilist helisüsteemi kuni 1536 KHz proovisagedusega ning pakub kullatud ühendusi usaldusväärseks ühenduseks. • UHD 2160p (4K) • 60 Hz kaadrit sekundis • Kullatud ühendused • 30 AWG puhtast vasest traat • 3D kogemus
Ühendab 4 A-tüüpi USB-perifeeriaseadet C-tüüpi porti Toetab kuni 5 Gbit/s ülikiiret andmeedastuskiirust Käepärane ja stiilne disain koos integreeritud kaabliga Ühildub kõigi C-tüüpi USB-ga varustatud arvutitega 2-aastane garantii Lindy 4 Port USB 3.2 Hub pakub 4 USB Type A SuperSpeed porti USB-perifeerseadmete ühendamiseks USB Type C-ga varustatud arvutiga. Hub on võimeline edastama andmeid kiirusega kuni 5 Gbit/s ning ühildub ka tagurpidi USB 2.0 ja 1.1 versioonidega. Rummu saab toite USB-bussist, samas kui selle funktsionaalne ja stiilne disain koos integreeritud kaabliga teeb sellest täiusliku kaaslase mobiilsete seadmete jaoks. C-tüüpi pistikute pööratav disain on välja töötatud nii, et ühendus leitakse sõltumata sellest, kummal viisil kaabel porti sisestatakse, ning tänu "Plug and Play" paigaldusele ei ole vaja draivereid, seega saab seda hubi paigaldada minimaalsete raskustega, mis on ideaalne nii professionaalsetele kui ka esmakasutajatele. Teave USB 3.0, 3.1 ja 3.2 kohta USB 3.0, USB 3.1 ja USB 3.2 arvutid, kaablid ja seadmed ühilduvad omavahel, kui kasutatakse kas USB Type A või USB Type C host-liidest. USB 3.0, USB 3.1 Gen 1 ja USB 3.2 Gen 1 toetavad kõik andmeedastuskiirust kuni 5 Gbps. USB 3.1 Gen 2 ja USB 3.2 Gen 2 toetavad mõlemad andmeedastuskiirust kuni 10 Gbit/s.
This USB-C to HDMI cable allows you to connect your laptop, tablet or computer equipped with a USB-C interface to a monitor or projector with HDMI interface. The cable supports video resolutions up to Ultra HD 4K (3840 x 2160). Perfect for MacBook, Chromebook and other USB-C devices.
Vention AAIBH 2m HDMI cable (black)Watch movies in high quality with Vention. The cable provides HD video in 4K and supports 3840 x 2160@60Hz. What's more, you can enjoy Hi-Fi sound and perfect audio and video synchronization. In addition, dynamic HDR is responsible for the richness of colors, and thanks to the use of durable materials and gold-plated connectors, the product is wear-resistant and efficient. In addition, you can successfully connect it to your laptop, TV, projector, PS3/4, etc. ManufacturerVentionModelAAIBHColorblackLength2 mVersion2.0InterfaceHDMI to HDMIResolution4K 60 HzMaterialaluminum, metal, PVC
Pocket for the second drive | 2.5 HDD 9,5mmAn aluminum pocket will allow you to install a second HDD on your laptop. The pocket is standard, compatible with most laptops available on the market (height 9.5 mm).
The Neomounts Select desk mount, model NM-D335BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 30?. This mount is a great choice for space saving placement on desks using a desk clamp, desk stand or desk grommet. Neomounts Select's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 46 centimetres. Depth adjustable to 8 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Neomounts Select NM-D335BLACK has one pivot point and is suitable for screens up to 30" (76 cm). The weight capacity of this product is 10 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts Select VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 30" - Desk mount: Clamp, grommet and stand - Depth: 8 cm - Height: 0 - 46 cm - Tilt: 90° - Rotation: 360° - Swivel: 180°
We create solutions that count every dayDiscover a new quality of data storage with our aluminium enclosure for M.2 SATA/ NGFF, which combines reliability, speed and wide compatibility. An ideal solution for those looking for mobile and easy-to-use data storage options, it is an interesting alternative, not only for those with documents or private files on disk, but also for small businesses wishing to archive their computer data without investing in other costly solutions.It's not just about 6Gb/s speed, it's also about convenience - one device, one USB cable, 2TB capacityWith a data transfer rate of 6 GB/s, you can access your files in no time. Whether you're working or enjoying multimedia, this enclosure enables the smooth transfer of information, enhancing the performance of your system.- Suitable for M.2 SSD SATA NGFF sizes: 2230, 2242, 2260, 2280,- UASP support, allows multiple commands to be executed at the same time,- OTG support, works with laptops and smartphones,- USB 3.0 interface supports data transfer rates of up to 6 Gb/s,- a single M.2 drive supports up to 2TB,- useful when there is no other way to connect an SSD,- USB cable included,- no need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function.Maximum mobility in an elegant aluminium housingThe sleek and handy enclosure for your drive M.2 SSD is a stylish protection for your valuable data. The case is made of high-quality aluminium, which further helps to dissipate heat. The compact size of the enclosure will allow you to take it with you to work or wine places, the pocket fits easily into a backpack. The durable enclosure provides effective protection against crushing and prevents any damage to the drive.Convenient and Universal Solution for M.2 SSD SATA NGFFNo special tools are needed to mount the SSD, simply slide out the case, insert the drive accordingly and slide it back into the case and screw it on. Once you have connected the bay to the device of your choice, you are good to go, the device is ready to go. Plug&Play function - no drivers to install, just plug and play!
High-Quality HDMI 1.4: The HDMI cable 1.4 supports both high resolution 4K 30Hz and Full HD 1080P, so also higher bandwidth up to 18Gbps. This allows you to enjoy clearer and more fluid images like in the cinema. The HDMI 4K cable supports HDR for a new visual experience that can intelligently adjust brightness, color and contrast to current lighting conditions. It also supports ARC (Audio Return Channel), 32 audio channels, 3D content, ECE, Ethernet, HDCP 2.2, 48Bit Deep Color and DTS sound.Flexible as well as durable: The cotton jacket gives the HDMI cable 1.4 both the necessary wear resistance and sufficient flexibility. Reinforced kink protection protects the HDMI cable 1.4 at the connector end against bending stress. The standard HDMI plug can fit well with sockets without appearing loose contact.Broad compatibility: TV, computer, Blu Ray Player, AV Receiver, Sat Receiver, Play Stations, Xbox, Set-Top -Box, soundbar, laptop, monitor, projector, etc Specifications: HDMI version: 1.4Cable lenght: 10mMax resolution support: 4K @30HzCable diameter: 8.5mm
FNIRSI SG-003A mini signal generatorThe FNIRSI SG-003A is a compact signal generator that combines functionality with precision and speed. The device provides measurement accuracy of ≤0.2% and instantaneous reading of results in as little as one second. With multi-function operation and an easy-to-read backlit screen, the SG-003A makes debugging and testing easy in a variety of conditions, whether you're working with PLC systems, DCS or calibrating instruments.A clear view of every parameterEquipped with a 2.4-inch HD display with adjustable brightness, the generator offers a clear view of parameters even in difficult lighting conditions. The various operating modes are additionally color-coded with backlighting, making operation significantly easier. Semi-transparent buttons provide convenience of use and a modernistic look.Pocket-sized format, professional capabilitiesThe SG-003A weighs just 165 grams and measures 112 x 82 x 27 mm, so it easily fits in a pocket or tool bag. It's perfect for field engineers and technicians who need a reliable and mobile diagnostic tool on hand.The versatility you needThe FNIRSI SG-003A generator supports many types of signals and modes of operation - from current and voltage input and output testing, to speed simulation and programming, to actuator position adjustment and inverter diagnostics. It's a multitasking tool ready for any challenge. What's more, with real-time curve view, you can track changes in input and output signals in real time. This facilitates analysis and ensures faster detection of potential abnormalities.Military-grade durability and convenience of useThe device is designed for intensive use. Equipped with drop protection technology, a USB-C charging port, silicone non-slip components and an easy-to-read power level indicator, it guarantees maximum convenience during every use. The whole thing is complemented by a standby mode that provides up to 24 hours of standby time.Includedmini signal generatorcrocodile clips x4USB charging cableType-C cableuser manual ManufacturerFNIRSIModelSG-003ADimensions82 x 27 x 112 mmWeight165 gColorBlue, blackScreenLCDScreen size2.4"InterfaceType-CInput5VBattery capacity3000 mAhStandby time24 hours
Fanttik S1 Apex Deluxe Electric ScrewdriverThe Fanttik Fold S1 APEX Deluxe is a versatile electric screwdriver with an intuitive LED display, torque adjustment and four-angle handle adjustment. With 20 S2 bits, a magnetic case and a capacious battery, it is a tool suitable for a variety of assembly and repair tasks.Precise torque adjustmentThe device allows you to set the torque from 0.5 to 7 Nm, selectable in 8 levels via an adjustment ring. The LED (Light Emitting Diode, light emitting diode) display shows the current torque and the battery charge level, providing full control over the working parameters.Foldable handleThe articulating mechanism allows you to set the handle at 0°, 24°, 48° or 72°, which makes it easier to access hard-to-reach places and increases the ergonomics of work. Such a solution reduces hand fatigue during prolonged use.Two speed modesThe screwdriver offers two speed modes - 100 rpm and 250 rpm - selectable by a button on the housing. This makes it possible to adjust the speed to suit the type of screws and materials, preventing damage.Magnetic case and bit setThe set includes 20 of the most commonly used bits made of hardened S2 steel (S2 alloy steel), placed in dedicated locations. The magnetic case protects the tools from getting lost and makes it easy to stay organized.Powerful battery and lightingThe built-in 2,500 mAh lithium-ion rechargeable battery allows for long operation without frequent charging. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port is compatible with popular chargers. The integrated LED (Light Emitting Diode, a light-emitting diode) light turns on automatically, making it easier to work in low-light areas.Includedelectric screwdrivermagnetic caseS2 x20 bitsUSB-A to USB-C cableinstruction manual ManufacturerFanttikModelA1 Apex DeluxeDimensions of the screwdriver275 x 50.5 x 48.5 mmTorque0.5-7.0 NmMaximum torque8 NmWeight (with case)1245 gCharging voltage5V/2ARated voltage3.7VBattery capacity2500 mAhSpeed (no load)100 rpm (low), 250 rpm (high)Charging time2-3 h
The chassis stand for the Tower 600 Mocha Mousse includes a base cover for the case and a display stand. It allows users to position their Tower 600 Mocha Mousse horizontally, making it easy to customize the case and create a unique experience. The base plate also features a filter to protect against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material provides long-lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to offer a secure grip and prevent unwanted sliding during use.
Short summary: The 3.5 mm Audio + Charge RockStar allows you to use your headphones while charging your iPhone. Just connect your 3.5 mm headphones, speakers, or AUX cable (aka AUX cord) to enjoy music or talk hands free, while you charge. Use the 3.5 mm RockStar at home, at work, in the car, or on the go. värv of product: White
Swissten Textile MD818ZM/A USB cable is an accessory enabling fast data transfer and safe charging of smartphones and other Apple devices with connector type Lightning. Use it to connect your phone or tablet to your laptop, PC or other device with a USB port. The cable is made of flexible, durable silicone, and the flattened construction prevents tangling. Apple certified cable (MFI).
