Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Laadib korraga kuni 6 tahvelarvutit, nutitelefoni ja/või sülearvutit või MacbookiKuni 6 tahvelarvuti, nutitelefoni ja/või sülearvuti või Macbooki samaaegne laadimine kuni 140 W või muude USB-seadmete laadimine.Max. 5V 2,4A laadimine ühe USB A-tüüpi pordi kohta, max. 30W või 140W laadimine USB Type C pordi kohtaToetab USB Power Delivery: 2x PD 3.0 kuni 30W kumbki ja 1x PD 3.1 kuni 140WAku laadimisstandard 1.2 toetab kiirlaadimist, Apple'i laadimisprotokolli, QC 3.0/4.0 ja Samsung AFC toetabLindy 160W 6-pordiline USB-laadimisjaam võimaldab laadida kuni 3 USB-seadet A-tüüpi ja 3 C-tüüpi kaudu, nagu tahvelarvutid, nutitelefonid või sülearvuti või Macbook. Iga USB A-tüüpi port võib pakkuda kuni 5 V 2,4 A, kaks USB C-tüüpi porti võivad pakkuda kuni 30 W kumbki ja üks isegi kuni 140 W, et rahuldada kõige energiamahukamaid seadmeid. Kui kõik 6 porti on hõivatud ja/või kui koguvõimsus on suurem kui 160W, toimub koormuse tasakaalustamine.Tänu nutikale laadimisfunktsioonile ja paljude erinevate protokollide, nagu QC 3.0 ja 4.0 (ainult C-tüüpi porte), Samsung AFC ja Apple 5V 2,4A laadimisprotokolli ning BC 1.2 (ainult A-tüüpi porte) toetusele suudab see USB-laadimisjaam tuvastada ühendatud seadme, et reguleerida automaatselt laadimisvoolu kiire ja turvalise laadimise jaoks.USB Power Delivery Revision 3.1 võimaldab suuremat võimsust kuni 140 W rakendustele, sealhulgas suurematele sülearvutitele, mänguriarvutitele, Macbookidele, tööjaamadele või dokkimisjaamadele. Veel 2 Type C PD 3.0 porti, millest igaüks kuni 30 W võimaldab nutitelefonide ja tahvelarvutite kiiret, paindlikku ja turvalist laadimist.See USB-laadimisjaam pakub ka ülevoolu-, ülepinge- ja lühisekaitseid, et vältida seadme kahjustamist liigse voolu poolt.Plastikust vaheseinad saab kokku panna ja seadme ülaosas seista, mis võimaldab erineva laiusega seadmeid eri suurusega tahvelarvutite või mobiiltelefonide jaoks. See toode sobib ideaalselt kasutamiseks koolides, raamatukogudes, hotellides, restoranides või mis tahes kohas, kus kasutatakse mitut seadet. Laadimisjaama sujuvaks kasutamiseks on kaasas riigispetsiifilised toitekaablid, mis on ideaalsed ülemaailmsete ürituste või välismaal asuvatesse rajatistesse integreerimise jaoks.
SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The AXAGON PCES-SA4X4 PCI-Express controller extends your desktop PC with four SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Output: 4x independent Serial ATA port, SATA III 6G standard. 4x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
7-Zoll-Touch-Panel, zur Darstellung von Systemwerten oder als Shortcut-Bar, perfekt für Streaming oder Gaming, frei konfigurierbar, Auflösung von 1.024 x 600 Pixeln
USB-C-> HDMI active adapter AXAGON RVC-HI8KPD for connecting an HDMI monitor /TV/projector to a notebook, tablet or mobile phone using USB-C connector. This adapter allows you to easily use your existing HDMI cable to connect devices such as an Apple MacBook Air or Pro. This compact hardware converter requires no installation and delivers excellent image quality up to 8K/60 Hz Ultra HD resolution. 8K resolution support lets you enjoy videos in stunning quality, while high HDMI refresh rates ensure a top-notch experience when watching movies, videos, or playing games. Popular resolutions such as 4K/144 Hz Ultra HD, 2K/240 Hz Quad HD, or 1080p/240 Hz Full HD are also supported. Thanks to HDR (High Dynamic Range) support, you can enjoy a wide range of colours and contrast without any compromises. A unique feature of this video adapter is the USB-C PD connector, designed exclusively for charging phones and laptops using Power Delivery 3.0 technology with up to 100 W of power. Simply connect a compatible USB-C charger with Power Delivery support and link the video adapter to your laptop. This not only ensures charging but also frees up one USB-C port on your laptop for other uses. The Plug and Play technology make it ideal not only for professionals but also for home users who want to easily and efficiently expand their multimedia setup. Enjoy a home cinema experience with up to 8K resolution or use the adapter for conferences and presentations. Its perfect for schools and interactive spaces where computers are frequently connected to HDMI devices. Graphic designers and video creators will appreciate the detailed display. The adapter is compatible with monitors from brands like Dell, HP, Lenovo, ASUS, Samsung, LG, Sony, MSI, and more, ensuring its versatility and reliability. With HDCP 2.3 support, you can enjoy your favourite streaming services in 8K / 4K resolution without limitations, including Netflix, Disney+, HBO Max, Amazon Prime, and Apple TV+. It also supports lossless audio transmission, best enjoyed on modern TVs. HDCP support must be enabled on all connected devices as well as by the streaming service itself. The adapter is made from high-quality materials, ensuring great reliability. The cable and connectors are protected against bending, which extends their lifespan. The adapter features a 16 cm flexible silicone cable, which offers greater flexibility, durability, and more comfortable handling compared to standard cables. A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a device with Thunderbolt 3/4 port is required for the adapter to function properly. The adapter is only oneway, i.e. USB-C to HDMI, not otherwise. Input (connection to computer or mobile device): USB-C with DisplayPort Alternate Mode or Thunderbolt 3/4/5 support. USB type C (M) male connector. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Powering a laptop from a wall adapter via the USB-C connector on the video adapter. Power Delivery support is required by both the laptop (tablet, phone) and the wall charger. Output (connection to monitor / TV / projector): HDMI v2.1 HDMI (F) female connector The most widely supported resolutions: 4K/144, 60, 30 Hz Ultra HD 2K/240, 144, 120, 100, 60 Hz Quad HD 1080p/240, 144, 120, 100, 75, 60 Hz Full HD Other supported resolutions:The resolution and frequency are determined by the monitor and graphics card used, as well as the cable. max. 7680 x 4320 (16:9) @60Hz UHD 8K 4096 x 2160 (17:9) @144Hz DCI 4K 3840 x 2160 (16:9) @144Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @240Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @240Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: Supports lossless transmission of up to 8-channel audio 192kHz at 24-bit. Supports DDC (Display Data Channel) intelligent adjustment of resolution, frequency, and other parameters based on the source graphics chip. Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. Supports HDR10, HDR10+ (High Dynamic Range, 10-bit support) realistic reproduction of bright and dark details. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, TMDS (Transition Minimized Differential Signalling) support. HDCP 2.3 (8K, 4K, QHD, FullHD) support - backwards compatible with HDCP 2.2. and 1.4. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via USB-C no external power is needed. Power supply via PD charger (not included). Dimensions 16 x 79 x 26 mm (H x B x D). Weight 43 g (incl. cable). Cable 16 cm long. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C > HDMI adapter with 16 cm log cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
Full-motion desk display mounting arm, 17”-35” Position your screen perfectly Lightweight and tilting design - Monitor desk mount with single monitor arm - Full-motion arm rotates, extends and retracts, tilts to change reading angles, and allows to rotate display from landscape-to-portrait mode, etc - Enables easy ergonomic positioning for reduced strain - Works with almost any LCD monitor (max. 35") - Durable adjustable gas-spring suitable for monitors of 3 - 10 kg - VESA compatible (100 x 100 mm and 75 x 75 mm) - Strong desk clamp or grommet for easy and secure fixation on your desk
Desk mounting arm for a single monitor The arm rotates, extends and retracts, tilts to change the reading angle, and allows the display to switch from landscape to portrait mode and more. Enables easy ergonomic positioning to reduce strain Works with almost any LCD monitor (max. 32") Durable adjustable gas springs, suitable for monitors weighing up to 10 kg Sturdy desk clamp for easy and secure attachment to your desk Removable VESA plate for easy installation Built-in cable management for an organized and tidy workspace Compatible with VESA, max. 100 x 100 mm
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
Length 1.8 m Product Type Cables Length 1,8 m Shipping box quantity 200 Unit Brutto Volume 0,0001379 cubm Unit Net Weight 0,078 kg Unit Gross Weight 0,083 kg
Original part number EE18-M2S3PCB-01 Product name Gembird adapter card M.2 (NGFF) to mini sata (1.8") Producer Gembird Class of product Others controllers/adapters Bus type SATA III Internal connectors 1 x SATA External ports 1 x M.2 NGFF Low-profile card No Length 106 mm Width 45 mm Net weight 17.5 g Additional information 1,8" Mini SATA adapter card for SSD M.2 (NGFF) driveFully compatible with SATA device interface: SATA 3/2/1M2 (NGFF) SSD supported: 3 cm, 4.2 cm, 6 cm, 8 cm
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1x naissoost USB 3.0 A-type 2-ühenduse tüüp: USB 3.1 Type-C (male) värv: must Lisaandmed: Enables connecting any standard USB 3.0 või 2.0 device to new type-C USB ports, liides
Tootja: Lanberg Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: HDMI male 2-ühenduse tüüp: D-SUB 15 naissoost värv: must Lisaandmed: Supports only one connection to a VGA monitor, resolutsioon Kuni 1920 x 1200 @ 60 Hz
NewStar flat screen desk mount NewStar NM-D775WHITEPLUS Full Motion Desk Mount (clamp & grommet) for 10-49" Monitor Screens, Height Adjustable (gas spring) - White The NewStar NM-D775WHITEPLUS is a tilt-, swivel and rotatable desk mount for flat screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars' unique tilt (90°), rotate (180°) and swivel (180°/360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 59 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775WHITEPLUS has three pivot points and is suitable for screens up to 49" (124 cm). The weight capacity of this product is 1 to 18 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
Data Transfer Rate: 5 Gbps võrguseadeing Type1Data Link Protocol Supports: Gigabit Ethernet/Fast Ethernet/Ethernet LAN kiibistik153 võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u võrguseadeing Features: Hot Swap USB 3.1: 1(USB Type-C) LAN: 1(RJ-45) Requires operatsioonisüsteem: Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Android, Apple Mac OS X16 External värv: must kaasastarvikud16 mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.35 kg Retail Packaging Netokaal Carton1
