Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
DST-Pro USB4, USB-C Laptop Docking Station Connect an 8K display or 2 displays at 4K 60Hz and peripherals over a single cable Connects an HDMI and/or a DisplayPort display, USB peripherals and power over a single cable Supports 8K 30Hz for a single display or 4K 60Hz for two displays (MST)* Integrated 4 port USB SuperSpeed 10Gbps Hub (3 x Type A, 1 x Type C) USB Power Delivery capable up to 100W Dimensions 129x69.5x48mm Weight 0.3 kg
With the Thunderbolt 3 protocol, PCI Express, DisplayPort and host-to-host transmissions can be implemented. With this cable, you can transmit audio/video signals, data, and also provide power. The data transfer rate is 5 Gbit/s. so you can transfer large files like movies and music in just a few seconds. Video signals are transmitted with up to 4K resolution and 60Hz refresh rate. Support for USB Power Delivery technology allows you to use the charging function. With the right charger, mobile devices can be quickly charged with a maximum power of 60 W (3 A / 20 V). The USB Type-C interface ensures broad compatibility with devices with this connector. Supports data transfer rates up to 5 Gbit/s Supports USB Power Delivery with 20V, 3A and 60W Backwards compatible with Thunderbolt 3 and USB 2.0 Support for transmitting DisplayPort audio/video signals over PCi Express Supports audio/video resolutions up to 4K @ 60 Hz Aluminum housing
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 2 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Ülikiire HDMI kaabel, tekstiilist kattegaHDMI pistik (tüüp A) > HDMI pistik (tüüp A)Goobay Plus seeria on õhukese, elegantse metallist disainiga Sharkskin Grey. Tipptasemel HDMI-kaabel saavutab tippväärtused eraldusvõime ja ülekandekiiruse osas ning sobib ideaalselt ka selliste nõudlike funktsioonide jaoks nagu ARC, HDR ja 3D-sisu.HDMI™ 2.1 kaabel heli ja video edastamiseks, nt PlayStationist telerisse või telerist SoundBarisse.Sobib universaalselt paljude multimeedia rakenduste jaoks, nt mängude, mängukonsoolide (nt PlayStation 5 või Xbox), Fire TV, Apple TV, sülearvutite ja Blu-ray-mängijate projektsioonidele.HDMI™-kaabel saavutab terava UHD-resolutsiooni kuni 8K @ 60 Hz ja 4K @ 120 Hz (tagurpidiselt ühilduv)Toetab kuni 48 Gbit/s maksimaalset ülekandekiirust pakkimata 8K videote jaoks koos HDR-iga, samuti ARC (Audio Return Channel), HDCP ja 3D-sisu jaoks.Paindlik kõrgekvaliteediline kaabel õhukeste metallpistikutega, paindumiskaitsega ja värviga sobiva tekstiilkaabligaÜhenduskaabli punutud tekstiilmantel tagab meeldiva tunde ja on tundlikele pindadele õrnatoimelineKullatud pistikud hoiavad ära korrosiooni ja on eriti vastupidavad
FPMA-D750DBLACK2 Neomounts by Newstar monitor desk mount Neomounts by Newstar Full Motion Desk Mount (clamp & grommet) for 10-32" Monitor Screen, Height Adjustable (gas spring) - Black
The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting
The Gembird DD-U3M2 SSD docking station offers a streamlined way to connect M.2 drives to your computer. With its USB-C to USB-A cable and accompanying dongle, this docking station ensures compatibility with various devices while maintaining a tidy setup. Designed for hot-swap capabilities, it allows users to easily access their SSDs without needing to power down, providing flexibility in data management.Featuring a data transfer rate of 10 Gbit/s, the DD-U3M2 enhances productivity with rapid file transfers. The inclusion of UASP transfer protocol and TRIM support further optimizes performance, making this docking station a valuable addition to any workflow. With compliance to several standards including ISO 9002 and RoHS, it upholds quality and environmental safety.
The Mercusys MA530 V1 network adapter enhances connectivity and performance for your computer setup. Designed with functionality and convenience in mind, this external, nano-sized Bluetooth adapter integrates seamlessly into any USB 2.0 port without obstructing other connections. Equipped with Bluetooth 5.3 standard, it ensures faster data transfer speeds, extended range up to 20 m in open space, and reliable performance across a broad range of Bluetooth devices. Suitable for home or office use, the MA530 V1 operates efficiently in diverse environmental conditions, supporting humidity ranges from 10 - 90% (non-condensing) and temperatures from 0°C to 40°C. Experience enhanced connectivity with the Mercusys MA530 V1.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
5 in 1 USB 3.1 Type-C to HDMI + USB 3.0 + PD Docking Station > Supports USB 3.1 Type-C port to transmit data at 10 Gbps. > Supports 3 × USB 3.0 ports. > For sharing screens in high resolution, the device charges terminal devices that are uplinked with 100 W power at the same time. > Works with devices that have Type-C ports and mainstream systems. > Plug and play, it does not require any configurations and the integrated > For game console, phone, laptop and tablet.
The DIGITUS DA-73108 USB extension cable is designed to meet the data transfer demands of modern technology. With a double shielded construction, this cable ensures a stable and reliable connection, minimizing interference and maximizing speed.Featuring USB 3.0 and USB 3.1 compliance, it supports data transfer rates of up to 5 Gbps, allowing for efficient transfer of files. The cable is equipped with a male USB-C connector on one end and a female USB-C connector on the other, making it compatible with a wide range of devices, from laptops to smartphones.
USB Type-C to Triple DisplayPort™ MST Hub 4K60Hz. The CSV-1553 is a MST hub to DisplayPort™. This USB-C MST hub is designed to cater for your most versatile connectivity demands, such as Mobile Phone, Tablet, laptop, etc. with a USB Type-C output which supports DP™ Alt-Mode as Host to 3 DisplayPort ports with Ultra High Definition support. It supports DP2.1 AltMode and will allow you to output one Display with max capability of a single 8K30Hz or dual displays of 8K30Hz + 4K144Hz support or triple displays of 4K60Hz Each. It supports on all DisplayPort Alternate Mode supported USB Type-C or Thunderbolt4 compatible devices. Give your Phone, Ultrabook more displays. Phones, Ultrabooks and notebooks are increasingly becoming more powerful and smaller in the physical form factor. With a single USB Type-C DisplayPort Supported port available you can now drive up to 3x Displayport™ screen simultaneously . All it needs is a free USB Type-C with DP™ Alt-Mode on your Phone, Laptop or Ultrabook to connect to the MST hub and will provide you with unparalleled connection options for Triple 4K60Hz displays. The setup is easy and simple to do, provided your system supports this function.
This cable connects your iPhone (with a Lightning port) to the DJI OM Multifunctional Module, enabling audio recording and phone charging. When used with the DJI Mic Mini Transmitter, it enables audio recording capabilities. Additionally, it allows the gimbal to charge your phone during use. Length: 15 cm PS! This cable is only compatible with Osmo Mobile 7 and 7P for audio recording and phone charging. It is not designed for use with other power adapters and does not support data transfer.Compatibility: Osmo Mobile 7P Osmo Mobile 7
This tabletop monitor riser holds up to 20 kg, allowing space for dual monitors and laptop displays as well as small office supplies and decorations. By adding a second tier to your desk with two sturdy clamps, it creates vertical storage space to improve work comfort and organization. Bringing a whole new dimension to your workstation. The raised screen changes the viewing angle and at the same time the sitting posture.
Personal Data GuardianThe Natec Owl Privacy Filter is an unassuming overlay for your computer or laptop screen that plays a crucial role in safeguarding personal data and confidential information. It is available in a variety of sizes: 13.3", 14", 15.6", 16", 17.3", 21.5", 23.8", 24", and 27".Take care of your data securityKey FeaturesOperationThe filter is constructed with 10 layers and utilizes micro-louver technology that prevents anyone viewing the screen from the side from seeing its content. Even at a slight angle, the image becomes sufficiently darkened and distorted to hinder data readability, and from 30 degrees, the screen appears completely black.Eye ProtectionThe Natec Owl privacy filter not only safeguards confidential data but also protects your eyes. Spending hours in front of a screen exposes you to harmful radiation; the filter limits its penetration, and its anti-glare properties further reduce eye strain.Additional FeaturesSafe ScreenMade from durable material, the privacy filter also protects your screen from dirt, scratches, and minimizes smudges and fingerprints. It preserves the touch functionality of your display.Easy InstallationEquipped with clips that attach to the monitor frame, the filter can be easily and quickly applied or removed at any timeideal for moments when you want to share your screen's content. For a more discreet, invisible option, transparent adhesive strips can be applied directly to the screen.
Duracell Procell Intense batteries are the industrial standard for duracell reinforced alkaline batteries.Procell Alkaline Intense Power 9V industrial batteries are specially designed to last longer (compared to normal Duracell Procell Alkaline 9V batteries) in professional high-power devices that require high power or pulse operation, such as electronic door locks, soap dispensers or security cameras.These high-quality alkaline batteries are designed for enterprises and designed for the highest loads. They are characterized by high efficiency throughout the life period even in difficult conditions!!
STRIMER WIRELESS 24P L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
25 m aktiivne optiline USB 3.2 Gen 1 kaabel, ühildub tagurpidi USB 2.0-gaToetab ülekandekiirusi kuni 5Gbps, ühildub tagurpidi USB 2.0 seadmetegaAramiidist kiudude tugevat kaablistruktuuriMadal RFI/EMI tundlikele keskkondadele2-aastane garantiiLindy USB 3.2 Gen 1 Type A to C hübriidkaabel võimaldab USB Type C seadet kasutada kuni 25 m kaugusel arvutist, säilitades samal ajal SuperSpeed ülekandekiirused kuni 5Gbps . Seda kasutatakse tavaliselt koosolekuruumides ja videokonverentsisüsteemidega või veebikaameratega, millel on oma toiteallikas, nt Logitech Rally Camera.See kaabel on mõeldud paigaldamiseks seintesse, kaablikanalitesse ja kaablikanalite kaudu. Aramiidkiud tagavad tugeva kaablistruktuuri ja tagavad võrratu tugevuse ja vastupidavuse. Kaabel on CPR-sertifitseeritud, mis tähendab, et kaabel vastab rangetele tuleohutusnõuetele. See kaabel on kavandatud madala raadiosagedushäirete (RFI) ja elektromagnetiliste häirete (EMI) tasemega, mistõttu sobib see kaabel tundlikesse keskkondadesse, kus signaali terviklikkus on esmatähtis.Pange tähele, et see kaabel töötab ainult isevarustatud seadmetega ja USB-hubidega, millel on väline toiteallikas.Translated with DeepL.com (free version)
Original part number TA-350-10 Product name Gembird RJ45/RJ45 in-line coupler 8P8C (10 pieces) Producer Gembird Class of product Network plug | coupler | boots Type of plug, coupler RJ45/RJ45 coupler Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information bag of 10pcs Colour ivory
USB extension cable, 6 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number CCP-USB2-AMBM-6G Gembird USB 2.0 A- B 1,8m cable grey color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Grey Additional information 30u" gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number 2L-5202U Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 2m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 2 m
Original part number 2L-5205U Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 5m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 5 m
The DIGITUS USB 2.0 7-Port hub makes it simple to connect up to 7 USB devices the same time to a PC or Mac. Plug in your favorite USB devices and profit from the very fast connection. This product has a clear and elegant design with a piano-black finish on the top and bottom surface, as well as an aluminium edge.- Dimensions: 8,5cm x 4,4cm x 1,4cm.- 7x USB 2.0 ports.- Color: black, silver.- USB 2.0 compliant.- USB Mini B jack.- Supports USB High Speed 480 Mbps and Full Speed 12 Mbps.- Supports media copy and hot-swap.- Supports hot-plugging, plug and play compliant.PortsUSB 2.0 7Features support Hot-Plugging; Plug & Play fähig; support Media-Copy and Hot-Swap; support USB High-Speed 480 Mbps and Full-Speed 12 Mbps; USB Mini B SocketProduct dimensions 85 x 14 x 44 mm