Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
DisplayPort -> HDMI active cable - adapter AXAGON RVD-HI14C2 to connect HDMI monitor/TV/projector to the computer with the DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. It is an ideal solution - you don't need a HDMI cable and converter. With this active cable everything is integrated into one compact unit. The cable is only one-way, i.e. DisplayPort to HDMI, not otherwise. Input: DisplayPort v1.2 DP male connector with latch (M) connector latch control button Output: HDMI v1.4b HDMI A (M) male connector Supported resolutions:Resolution and frequency depend on monitor and graphics adapter. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection / disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 1.8 m weight only 70 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by a cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDMI cable length 1.8 m, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 5 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
Ergonomically ideal adjustment of monitor position to user height For flat and curved monitors Monitors can be tilted, swiveled and adjusted in height Integrated gas spring for easy height adjustment Easy mounting on the desk by means of a clamping device Quick-release function for fast attachment and removal of the monitor Compact design with cable management system Practical table clamp with screw attachment Two mounting options: both table clamp and grommet rod are included in the scope of supply Inclination: -45°/+45°, horizontal rotation: -180°/+180°, front panel rotation: -90°/+90° Gas spring: perfectly cushions the weight of the monitor
Desk mounted adjustable mounting arm for 3 monitors (full-motion) Position your screen perfectly Lightweight and tilting design Adjustable monitor desk mount for 3 monitors Two arms rotate, extend and retract, tilt to change reading angles, and allow to rotate displays from landscape-to-portrait mode, etc Central mount allows height adjustment, swivel, tilt and rotation Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27" ) Durable adjustable gas-springs suitable for monitors of 1 - 7 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The Neomounts DS20-425BL1 NEXT Lite is a full motion desk mount for laptops up to 17,3" with a maximum weight capacity of 5 kg. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal height and viewing angle for your laptop. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS20-425BL1 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet. The packaging of the NEXT Lite is 100% plastic free and entirely made from cardboard and paper.
Impress 100 Micron thickness - offering an everyday level of document protection, Ideal for notices, craft materials, signage and frequently handled documents, Gloss finish in A3 size, Pack size of 100, Compatible with all ...
Original part number PP6U-5M Product name Gembird patchcord RJ45, cat.6, UTP, 5m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Cross-Over No Boot non-snag-proof Colour Grey
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 type C (naissoost) 2-ühenduse tüüp: Lightning värv: must Lisaandmed: USB type-C (naissoost) to 8-pin (male) adapter plug, Enables connecting any USB-C peripherals to a 8-pin Apple device , mõõtmed
Dimensions: 7,2 x 6,7 x 2,3 cm Accessories included: HDMI video extender transmitter Receiver HDMI video extension cable Power supply: DC 5V / 2A Infrared transmitter Infrared receiver User manual Other features: HDCP 1.2a support Bandwidth: 4.95 Gbps Color depth: 8 bits It supports uncompressed audio signals, such as LPCM Metal housing Compact dimensions, simple operation and installation Power supply: DC 5V / 2A
Screen size (max): 27 Load (max): 16 Vertical adjustment: 45 Horizontal adjustment: 45 Dimensions: 480 x 130 x 150 mm Weight: 4.1 Other features: - Pivot: 360°- Integrated cable management system- Maximum weight on the frame: 8 kg
NewStar flat screen desk mount NewStar NM-D775DX3BLACK Full Motion Dual Desk Mount (clamp & grommet) with crossbar and handle for two 17-24" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775DX3BLACK is a tilt-, swivel and rotatable desk mount with crossbar and handle for three flat screens up to 24". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars unique tilt (20°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 60 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775DX3BLACK with handle has three pivot points and is suitable for most screens up to 24" (61 cm). The weight capacity of this product is 2 to 18 kg (max. 6 kg each screen). The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
The NewStar desk mount, model FPMA-D550DDVBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32”. This mount is a great choice for placement on desks using a desk stand. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount has a height of 91 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D550DDVBLACK has one pivot point and is suitable for screens up to 32". The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. Min. screen size: 10 Max. screen size: 32 Desk mount: Stand Mount: Desk Tilt (degrees): 90° Swivel (degrees): 180° Rotation (degrees): 360° Height adjustment: Manual Height: 91 cm
Data Transfer Rate: 5 Gbps võrguseadeing Type1Data Link Protocol Supports: Gigabit Ethernet/Fast Ethernet/Ethernet LAN kiibistik153 võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u võrguseadeing Features: Hot Swap USB 3.1: 1(USB Type-C) LAN: 1(RJ-45) Requires operatsioonisüsteem: Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Android, Apple Mac OS X16 External värv: must kaasastarvikud16 mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.35 kg Retail Packaging Netokaal Carton1
Superfast external AXAGON EEM2-GTR THIN RIB box koos USB 3.2 Gen 2 interface is designed NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C ühenduspesa on the box together koos the supplied USB-C -> USB-C kaabel enables a reliable connection t
Active Optical (AOC) High speed HDMI cable with Ethernet "AOC Premium Series", 20 m - HDMI Active Optical Cable (AOC) uses fiber optic technology to transport the digital HDMI signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. HDMI AOC cables also have dedicated copper power wires inside, so no external power supply is required. - HDMI AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments - Durable extra thin premium quality braided cable with stylish metal connectors - Smaller cable diameter compared to traditional copper HDMI cables - Supports 4K UHD resolutions at 60Hz Cable length 20m Connectors HDMI Type-A male, Colour Black
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
FPMA-D750DBLACK2 Neomounts by Newstar monitor desk mount Neomounts by Newstar Full Motion Desk Mount (clamp & grommet) for 10-32" Monitor Screen, Height Adjustable (gas spring) - Black
The Logitech Strong USB-C cable is a robust and reliable solution for your connectivity needs. Designed with a 3/4" conduit-friendly structure and an aramid-reinforced sheath, it offers durability and ease of installation in various environments. This cable leverages Active Optical Cable (AOC) technology to ensure high-performance data transmission, making it ideal for connecting a wide range of devices with USB 2.0, USB 3.0, and USB 3.1 compatibility. Safety is a priority, and the Logitech Strong USB-C cable meets the IEC 60332-1-2 standard, providing a flame-retardant design for added peace of mind. Whether for professional or personal use, this cable stands out for its quality and safety standards.
