Varia lisaseadmed

Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.

GEMBIRD USB-C to HDMI-male adapter 4K 60Hz 2m black

UNITEK V1608A CABLE ADAPTER DisplayPort 1.2 - HDMI 2.0 4K 60HZ 1.8m

GEMBIRD EE2-U3S-2 HDD/SSD enclosure Gembird for 2.5 SATA - USB 3.0, Aluminium, Black

ICY BOX IB-525-U3 Enclosure for one 5.25inch SATA drive - supports CD/DVD/Blu-ray

Savio DVD AK43

ICY BOX IB-200T-C3 External 2.5inch HDD/SSD case SATA USB 3.2 Gen 1

Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

External USB audio adapter AXAGON ADA-12 easily and quickly adds missing headphones output or microphone input to your computer. It will also serve well as a replacement for the broken original integrated sound card in the notebook. The sound card is suitable for desktop computers and notebooks and allows you to connect headphones or active speakers and a microphone. Adapter metal housing is made of aluminum and thus provides perfect mechanical protection. Fixed cable guarantees sufficient flexibility. The sound card together with the headset will form an ideal accessory for online communication programs such as Skype, Zoom, MS Teams etc. The card is easy to install, just plug the sound card into the computer's USB port and the rest will be done automatically. Input: 1x USB 2.0 Full Speed USB port, backward compatible with USB 1.1. USB type A male connector located on a fixed 15 cm cable. Audio output: 2-channel analog 16-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers. Audio input: 1-channel analog 16-bit input (3.5 mm stereo jack): mono microphone input. Sampling rate, resolution and output converter (DAC) noise: analog - 44.1 / 48 kHz @ 16 bit for playback, signal-to-noise ratio (Output SNR) 93dB, harmonic distortion (Output THD+N) -70dB. Sampling rate, resolution and input converter (ADC) noise: analog - 44.1 / 48 kHz @ 16 bit for recording, signal-to-noise ratio (Input SNR) 83dB, harmonic distortion (Input THD+N) -76dB. Other features: Easy to install thanks to full Plug and Play support. Possibility to connect your device while running thanks to the Hot Plug support. Compliant with the USB Audio Device Class specification v1.0. Adapter power supply via USB (bus power) - no auxiliary power supply required. Miniature dimensions of 29 x 29 x 12 mm, cable length 15 cm. Weight 16 g. Setting up a sound card in Windows allows: adjusting volume and balance of speakers, enhanced speaker features: Bass Boost, Virtual Surround Sound, Room Correction, Loudness Equalization, setting the sampling rate and bit depth for both reproduction and recording, setting the automatic level of gain for the microphone (Automatic Gain Control), setting the manual level of gain for the microphone. Supported OSs: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Compatible with all Internet telephony programs using the sound card. Package contains: audio adapter, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM15AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1.5 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Goobay videokaabel High Speed HDMI Cable with Ethernet

CABLE USB3.1 5M/43308 LINDY

Digitus DB-340201-010-S

The Lenovo Thunderbolt 4 Workstation Dock Split Cable is dock split cable, designed for ThinkPad Thunderbolt 4 WorkStation Dock by combining slim-tip power cable and Thunderbolt 4 cable. Armed with latest tech of Thunderbolt 4 to unleash the power of your processor, matching updated docks. Lightning speed data with 40 gbps transmission rate to transfer shows, movies, and music in seconds. Fast charging supports up to 100w through USB-C or 170w/230w through DC plug.

SAVIO Adapter HDMI (M) VGA 15 pin (F) with sound (jack 3.5mm) CL-23/B Resolution up to 1080p It does not require additional power supply Has an audio output Plug & Play Audio cable jack 3,5 mm Activity range: audio video transfer HDMI direction -> VGA

Extends an HDMI signal over a distance of up to 70 m in UHD resolution (4K/60 Hz) and offers KVM/USB functionality for the connection of mouse, keyboard and touchscreen.

FPMA-D550SBLACK Neomounts by Newstar monitor desk stand Neomounts by Newstar FPMA-D550SBLACK full motion desk stand for 10-32" monitor screen, height adjustable - Black

Max. weight 10 kg | Fits screens sized 43-110" | 200 mm x 200 mm | 300 mm x 200 mm | 400 mm x 200 mm | 400 mm x 300 mm | 400 mm x 400 mm | 600 mm x 300 mm | 600 mm x 400 mm | 800 mm x 400 mm | 800 mm x 600 mm | Colour Black

Mini DisplayPort -> HDMI active adapter AXAGON RVDM-HI14N to connect HDMI monitor/TV/projector to the computer with the Mini DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. This is a convenient solution if you already own an HDMI cable - you only add a reducer. The adapter is only one-way, i.e. Mini DisplayPort to HDMI, not otherwise. Input: Mini DisplayPort v1.2 Mini DP male connector Output: HDMI v1.4b HDMI A (F) female connector Supported resolutions:Resolution and frequency depend on monitor, graphics adapter and also cable. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 18 cm weight only 17 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by the adapter chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: Mini DisplayPort > HDMI adapter, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Gembird WM-70F-03 37-80”

EDBAK Desk Mount | DMV01 | Height adjustment, Tilt | 19-49 " | Maximum weight (capacity) 20 kg | Black

EDBAK Desk Mount | DMV02 Dual Swing Arm | Height adjustment, Tilt | 19-35 " | Maximum weight (capacity) 20 kg | Black

EDBAK VWPOPS55-L Ultra Thin Video Wall Pop-Out Mount with Quick Release for 42″-55″ Screens

The Neomounts by Newstar DS70-450WH1 is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450WH1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.

The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.

The Neomounts DS75S-950BL2 NEXT One is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (19,1-52,7 cm) and depth adjustment (17,3-71 cm), to create the perfect working position. The displays can be individually adjusted in height, to guarantee perfect screen alignment. Additionally, due to the flexibility of the VESA heads, the screens can be positioned in large cockpit setup. The handle is height adjustable for maximum comfort. The DS75S-950BL2 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The black VESA plates and crossbar of the NEXT One integrate stylishly with the black back of your screens. The DS75S-950BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various optional VESA adapter plates available. The monitor arm is equipped with a Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.

A professional in every way The Unitek S1225A aluminium enclosure with USB 3.2 Gen2 interface allows the installation of any M.2 type PCIe (NVMe) or SATA (AHCI) memory. It is perfectly compatible with drives with heatsinks up to 12.5 mm in height. The slot fits M key and M+B key drives with different lengths: 42 mm, 60 mm or 80 mm. At lightning speed The enclosure provides data transfer speeds of up to 10Gbps. It works with UASP (USB Attached SCSI Protocol) technology and the TRIM (ATA Data Set Management Command) instruction. With UASP, the USB device can establish a command sequence and execute several commands simultaneously. This increases read transfers as well as write transfers by approximately 30 per cent compared to traditional USB devices. TRIM tells the SSD which data blocks are unused and allows them to be refilled with data. This improves performance and extends the life of the drive. Robust armour The case will not only protect the drive from external damage, but also conducts heat brilliantly due to the high quality of the material, the included thermal pads as well as the clever design with aluminium fins. Its compact size means that it can even be stored in a small ladies' handbag. An Autosleep mode is also included to conserve battery power, and starts after 30 minutes of inactivity. The drive slot is ejectable and includes a safety catch to prevent accidental ejection. The included flat cable is robust and will last for years. Quality guaranteed All Unitek products in Poland are covered by a three-year distributor warranty. To activate it, register your purchase via the Unitek Search app (available on iOS and Android). Key features: USB 3.2 Gen2 10Gbps standard with backward compatibility Compatible with PCIe (NVMe) or SATA (AHCI) drives UASP and TRIM Autosleep mode Heat dissipation design

B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information: HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5" and 3.5" SATA drives. With SINGLE mode, both hard drives are recognized as separate drives SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

Monitor mount 17-45 inches 16kg gas spring Maclean monitor mount, computer screen holder, double arm, with gas spring, 17"-45", 16 kg, MC-969 Universal LCD or LED monitor mount with the possibility of mounting to a desk top or in a cable hole. The mount is designed for monitors with a screen diagonal from 17" to 45" and a maximum weight of up to 16 kg. The MC-969 mount provides great working comfort, optimizes ergonomics and visibility by adjusting the angle of tilt, rotation, height, etc. This allows you to adjust the position of the monitor fully to your workstation. The mount will easily attach the screen in VESA standard: 75x75, 100x100 mm. The mount is compatible with LED, LCD, OLED monitors of such brands as Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte. The mount is equipped with a gas spring for infinite height adjustment of the monitor. This makes it easy to adjust the position of the monitor to your preference, raising or lowering it in just a few seconds. The mount is made of durable materials that guarantee the stability and safety of the monitor. The solid construction allows you to place monitors up to 45" without worrying about their safety. The modern and neat design of the mount makes it blend in well with most office or home interiors. The MC-969 mount is easy to install and can be attached to a desk top or in a cable hole. All the necessary mounting hardware is included. Cable grommets help to guide cables in an orderly manner. This reduces clutter on your desk, resulting in a neater look and a more organized workspace.

The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.

The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

HDMI 2.1 active optical cable HDMI optical cables allow for lossless transmission of audio/video signals over vast distances. Thanks to the use of optical fibres as conductors, they are extremely thin, which facilitates cable routing and additionally provides resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows the transmission of 8K quality video at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, the resolution can be increased up to a maximum of 10K!

Monitor stand (rectangle) Position your screen perfectly to reduce neck and eye strain

The Neomounts by Newstar FPMA-D550DD3BLACK is a full motion desk stand for three flat screens up to 27" with a maximum weight capacity of 7 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Additionally, the mount features height adjustment (0-43,2 cm), to create the perfect work situation. The smart cable management clips ensure orderly routing of the cables. Additionally, the mount features an Easy-release VESA, that allows you to (de)attach the monitors in a wink of an eye. The FPMA-D550DD3BLACK is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Deviant hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates.

The Neomounts DS70-450BL1 NEXT Core is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450BL wall adapter is optionally available.

The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.

The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A