Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1x naissoost USB 3.0 A-type 2-ühenduse tüüp: USB 3.1 Type-C (male) värv: must Lisaandmed: Enables connecting any standard USB 3.0 või 2.0 device to new type-C USB ports, liides
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 type C (naissoost) 2-ühenduse tüüp: Lightning värv: must Lisaandmed: USB type-C (naissoost) to 8-pin (male) adapter plug, Enables connecting any USB-C peripherals to a 8-pin Apple device , mõõtmed
Tootja: Lanberg Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1 x Male USB-A, 1x naissoost USB A-type kaabli pikkus: 1.8 m kullatud pistikud: Ei kaabli värvus: sinine
RaidSonic USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.1 Type-C seadme suurus: 12.5 mm seadme liidesed: M.2 NVMe toetatud seadmed: SSD toiteplokk: Bus powered laius: 40 mm kõrgus: 15 mm sügavus: 105 mm Netokaal: 0.1 kg
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Abbreviated kirjeldus: HDD External Adapter Incl. Case Drive Cabinet Type 1 Cabinet Material: plastik Mounting Capability 1 (micro-USB (type B)); External värv: must Drive Cabinet Features 122 mm kõrgus (mm): 78 mm sügavus (mm) 19 mm
võrguseadeing Type: võrguseade Adapter Local Area võrguseade arhitektuur10Base-T liides: USB 3.0 võrguseadeing Form Factor1Data Link Protocol Supports: Gigabit Ethernet LAN kiibistik153 Data Bit Rate: 1000 Mbps võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u USB 3.0: 1(USB 3.0 (type A)) LAN: 1(RJ-45) Requires operatsioonisüsteem: Apple Mac OS, Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows XP 64-bit, Microsoft Windows 8, Microsoft Windows Server 2010 External värv: must Package Type1mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.55 kg Retail Packaging Netokaal Carton1
DisplayPortiga varustatud seadme ühendamine 4K HDMI kuvariga või projektoriga Toetab kõrgekvaliteedilisi resolutsioone kuni 4K@60hz Kõrge dünaamilise ulatuse tugi tagab sügavamad mustad, heledamad valged ja laiema värvigamma. Aktiivne kiibistik täiustatud ühilduvuse tagamiseks erinevate graafikakaartidega 2-aastane garantii Lindy aktiivsete DisplayPort-HDMI-kaablite tootesari ühendab suurepärase jõudluse ja stiilse disaini, et tagada DisplayPort 4K@60Hz signaalide kvaliteetne muundamine HDMI kuvarile või projektorile väljastamiseks. See aktiivkaablite valik on varustatud sisseehitatud kiibistikuga, mis mitte ainult ei taga usaldusväärset ühendust, vaid parandab ka ühilduvust nii kaherežiimiliste kui ka mitte-duaalrežiimiliste graafikakaartide ja allikaseadmetega, mis sobib ideaalselt DP-graafikakaartide, sülearvutite ja arvutitega kasutamiseks, vältides samal ajal vajadust täiendavate adapterite järele. Tänu kuni 4096x2160@60 Hz resolutsioonide toetusele ja täiendavale High Dynamic Range'i toetusele saab 4K-sisu vaadata kristallselge selguse, parema kontrasti ja elutruumate värvidega. Need kaablid sobivad suurepäraselt pilkupüüdvate jaemüügiekraanide, innovaatiliste töökeskkondade või kaasahaarava videomängu loomiseks spordibaarides ja kodukinos, samas kui pakkimata mitmekanalilise heli toetus võimaldab muljetavaldavat kolmemõõtmelist ruumilist heli, mis täiendab üksikasjalikku ja selget videot. AMD Eyefinity-tehnoloogia toetus annab kasutajale ka kulutõhusa võimaluse luua kuni 3 või enamast monitorist koosnev mittestandardse kuvasuhtega või ülikõrge resolutsiooniga kuvar. See funktsioon võimaldab kasutajal käivitada samaaegselt mitut rakendust eraldi ekraanidel, parandades tootlikkust töökohal või luues laiekraanilise mängukogemuse. Pange tähele: Heliväljund üle HDMI on toetatud ainult siis, kui sülearvuti või lauaarvuti graafikakaart toetab heliväljundit üle DisplayPort. Mitmed sülearvutite pardagraafikaadrid, näiteks Mobile Intel 4 Series Express Chipset sülearvutites EI toeta heliväljundit üle DisplayPort, isegi kui helikontrollerite jaoks on paigaldatud HDMI-tugi (Intel High Definition Audio HDMI Service). Sellistel juhtudel tuleb luua eraldi audioühendus. Pange tähele: Mõned Nvidia uusimad draiverid ei tööta korrektselt 4k@60Hz 4:4:4:4 puhul, kui nad konverteerivad DP/mDP-st HDMI-sse, ja töötavad ainult 4k@60Hz 4:2:2 puhul.
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
The robust ROG Herculx Graphics Card Holder securely fortifies even the most powerful cards, plus offers an easy-to-use design and extensive compatibility. Stand design is compatible with a variety of chassis and doesn’t occupy PCIe slots. Offers a support height of 72-128 mm, delivering a strong, adaptable design. An adjustable wheel and release button enable easy, toolless setup and removal. Included spirit level simplifies setup. Embedded 3D ARGB element is compatible with Aura Sync.
The AXAGON ADS-1PSN active USB converter easily extends your computer with a RS 232 standard serial port. The seamless compatibility of the USB - serial RS232 adapter is due to the use of an original chip from the Taiwanese company Prolific. The fixed 1.5 m long USB-A cable is suitable for use with both a desktop computer and a laptop. The cable is equipped with gold-plated connectors and contacts, the very durable body of the adapter is also suitable for industrial applications. Double shielding protects transmitted signals from adverse interference. An ideal accessory for your computer to connect barcode readers, cash register printers, scanners, microcontroller programmers, CNC machines, modems, and to upgrade or configure set-top boxes, security devices, switches, transmitters and other devices. Input: USB 480Mbps interface (USB 2.0), backward compatible with USB 1.1. Connecting USB type A male connector located on a fixed 1.5 m cable. Output: 1x serial RS-232 port with a DB9 male connector integrated in the adapters body. Transmission rate adjustable in range 75 bit/s - 1000 kbit/s. Compatible with 16C950 UART, backward compatible with 16C550, 16C650, 16C750 and 16C850. Other features: Plug and Play support. FIFO buffer sending 768B and receiving 256B. Adjustable flow control Xon/Xoff, hardware or none. Adjustable word length 4, 5, 6, 7 or 8 bits. Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits. Adjustable usage of the FIFO buffer: receiving (1 - 14b) and sending (1 - 16b). Adjustable number of the port COM1 to COM256. Power Management support. Adapter power supply via USB (bus power) - no auxiliary power supply required. Gold-plated connectors and contacts ensure a reliable connection and, by preventing oxidation, ensure a long life of the converter. Outer cable diameter 5 mm, double shielding. Original Prolific PL2303GT chipset with integrated serial line driver is used. Adapter body dimensions 35 x 56 x 17 mm, cable length 1.5 m. Adapter weight 83 g (including cable). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. Package contains: USB - serial adapter with a 1.5 m long permanently attached USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Cable adapter USB-C USB-A AXAGON RUCM-AFAC connects existing devices with a USB-A connector to any new device with a modern USB-C interface. Adapter is designed for quick connection of a USB hub or external drive to notebooks equipped with only USB-C connectors. It is also great for connecting a flash drive to a mobile phone with a USB-C connector. It supports data transfer speeds of up to 5 Gb/s and power supplies of up to 3A. The reduction is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference. Connectors: vstup USB-C (M) male. výstup USB-A (F) female. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Cable includes power wires 22AWG, data wires 30AWG.Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Pulldown resistor 5 k. Suitable for notebooks, mobile phones and smartphones, powerbanks, tablets and other mobile devices with USB-C connector. Other data: cable length 0.2 m, 4.2 mm outer diameter. Package contains: USB-C M USB-A F cable adapter, packed in a printed and sealed foil package with hanging hole.
The Axagon CRE-SM3N ID card reader is a secure helper, for example, when logging in to the internet bank and digitally signing documents. It supports ATM/CAC/ID/IC/SIS cards. The ID card reader supports Windows, Linux, macOS and Android operating systems.You can communicate with government agencies, banks, and e-service providers at home or at work without leaving your computer. You can also use an ID card to enter almost all major e-service environments in Estonia, which is the safest and most convenient way to log in. It is no longer necessary to remember different passwords and usernames for different services, an ID card, a card reader, and an ID card PIN code are sufficient.
Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Twisted connection USB-C USB-A Data and Charging AXAGON BUCM-AM10TB TWISTER USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 480 Mb/s data transfer and charging with current up to 3A. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Thanks to the twisted and winding design, the cable takes up a minimum of space and is an ideal accessory for the car. In the shortened state, the cable is only 35 cm long and does not obstruct anywhere. When stretched, it comfortably reaches 60 cm away from the socket. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Durable cable gland reduces dangerous cable bending. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0, compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0 / 3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 60 cm in stretched state, 35 cm in shortened state, 4.2 mm outer diameter. Package contains: USB-C M USB-A M twisted black cable, packed in a printed and sealed foil package with hanging hole.
Product Features: 18Gbps high-speed bandwidth. Backward compatible. Design for transmitting the 4K@60Hz Ultra HD display signal in a long distance, as specified in HDMI 2.0. With HDR, greater detail and contrast in both the dark and bright parts in the same image as well as an extended color space. With ARC, you are able to let an HDMI-connected TV send audio data upstream to a soundbar or audio receiver. Support lossless HDMI audio formats like Dolby True HD and DTS-HD etc. Supports EDID incl. self-detecting function. Made with corrosion-resistant gold-plated connector and 7-layer shielding structure. High resistance against surrounding electromagnetic interference. Safe for everyone via the nil-radiation environment. Hardware & Dimension: Material: Gold-plated connector Color: Black Cable Length: 5M (C11041BK)/ 10M (C11043BK)/ 15M (C11045BK)/ 20M (C11046BK) Cable OD: 8mm (5M 10M) / 9.5mm (15M) / 9mm (20M) Package Contents:1 x 4K 60Hz Extra Long HDMI Cable 1 x User Manual
The Lenovo Thunderbolt 4 Workstation Dock Split Cable is dock split cable, designed for ThinkPad Thunderbolt 4 WorkStation Dock by combining slim-tip power cable and Thunderbolt 4 cable. Armed with latest tech of Thunderbolt 4 to unleash the power of your processor, matching updated docks. Lightning speed data with 40 gbps transmission rate to transfer shows, movies, and music in seconds. Fast charging supports up to 100w through USB-C or 170w/230w through DC plug.
