USB 3.0 - USB-C SuperSpeed adapter, must USB-C (F) > USB 3.0 (M, tüüp A) seadme hõlpsaks ühendamiseks USB-A-ühendusega USB-C kaabli abil andmeedastus kuni 5 Gbps - kümme korda kiirem kui USB 2.0 sobib USB-C-pordiga MacBookile allapoole ühilduv USB 2.0 ja 1.1 USB-C pistikut saab kasutada mõlemat pidi
CABLE HDMI M/M V2.1 40M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 8GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
3-in-1 USB cable with magnet Foneng X62 (black)Are you looking for a cable with which you can charge various devices? Foneng X62 cable will certainly meet your expectations! It is equipped with special magnetic terminals with different connectors that you can freely exchange. There is a Lightning, microUSB and USB-C connector at your disposal. It offers charging with a current of 5V / 2.4A and ensures safe use. One cable for multiple devicesNow you only need 1 cable to renew energy in different equipment - you can forget about the need to switch cables or constantly replace adapters. The Foneng cable will not only give you the convenience of your dreams, but also save you time. The magnetic connector was created so that it can be automatically attracted - you just need to bring them closer together! Safe useYou no longer have to worry about your phone being damaged while charging. The cable is equipped with a smart chip that automatically recognizes the connected device and adjusts the charging parameters to it. This effectively protects your equipment from overcharging or short circuits. ManufacturerFonengModelX62ColorBlackInput current12-24V / 5AOutput current5V / 2.4AOutput power12 WFast chargingQC 2.0MaterialPCLength1 m
Elektriline õhupuhasti arvutitarvikute ja majapidamises kasutatavate esemete kontaktivabaks puhastamiseks Mobiilne Goobay õhupuhasti on ideaalne puhastusvahend koduses majapidamises. Varustatud 3 töötamisastmega ja 5 erineva pihustiga, sobib see paljude erinevate rakenduste jaoks - isegi raskesti ligipääsetavates kohtades. Tänu laetavatele patareidele on puhur pikaajaline ja keskkonnasõbralik alternatiiv purgi õhule. Arvutipuhastuskomplekt 5 vahetatava otsikuga puhastab tõhusalt ja võimsalt klaviatuuri, arvutikastid, radiaatorid, mänguasjad, diivanid ja elektroonikaseadmed. Pehme harjaotsik ei tekita kriimustusi ega kahjustusi nt kaamera, teleri või sülearvuti puhastades. Ideaalne multifunktsionaalne kaaslane vabal ajal ja puhkusel, nt õhumadratsite täispuhumiseks või auto sisemuse puhastamine tolmust ja liivast Tolmupuhuril on 3 võimsusastet kuni 35 000 pööret minutis 2000 mAh juures ja kuni 90 min. tööaeg. Integreeritud LED-ekraan näitab valitud tööreiimi ja aku olekut Õhupuhur pakub keskkonnasõbralikku, mittetoksilist ja pikemas perspektiivis odavamat alternatiivi purgi suruõhkudele. Klaviatuuripuhasti on varustatud kvaliteetsete 18650 Li-ion akudega, mis tagavad eriti pika kasutusaja (USB-A-lt USB-C™ laadimiskaabel on kaasas).
USB-C 100W CableA long USB cable compliant with the Power Delivery standard that allows you to power devices with 100W, which allows you to quickly charge laptops. The 90-degree angled plug allows you to nicely route the cable along the laptop case.High quality workmanshipThanks to the braiding, the cable does not get tangled and looks very aesthetically pleasing. The 2-meter length means you don't have to place your laptop close to a power outlet.VersatileThe cable supports the data transfer and device charging function. Support for Quick Charge 3.0 and Power Deivery 3.0 technology allows you to quickly charge devices.
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
USB-C (M)> USB-C (M) SuperSpeed ??andmeedastus kuni 5 Gbit/s - 10x kiirem kui USB 2.0 ülikiireks sünkroonimiseks ja laadimiseks kuni 3A USB-C pesa saab kasutada mõlemast otsast
Seda Delocki kaablikanalit saab kasutada avatud kaablite koondamiseks ja varjamiseks laua all. Vastupidav plastik kaitseb kaableid mustuse ja kahjustuste eest.Lihtne paigaldusKaablikanalit saab kinnitada kaasasoleva 3M kleeplindi abil põhja ja seda saab hõlpsasti ja sujuvalt laua külge kinnitada. Valikuliselt saab kaablikanalit kinnitada ka kruvidega.Palju ruumi erinevatele kaabliteleSõltuvalt üksikute kaablite läbimõõdust ja paksusest saab mahutada nt HDMI-, heli- või toitejuhtmeid. Nii on kaablid turvaliselt ja korralikult ära paigutatud.Spetsifikatsioon- Laua alla kinnitamine- Korduvkasutatav- Keskkonnatemperatuur: -15 °C ~ 70 °C- Materjal: PVC- Värv: valge- Mõõtmed (LxSxK): ca. 400 x 63 x 28 mmPakendi sisu2 x kaablikanal3M kleeplint
Orico 6-in-1 Hub Adapter, HDMI 4K + 2x USB-A 3.0, USB-C, 100W PDThe Orico adapter is an indispensable tool for those looking for maximum functionality and performance in one compact device. With support for 4K@60Hz HD resolution, the adapter's screen casting provides exceptional clarity and a superior visual experience, making it ideal for both work and entertainment.Instant data transfer and chargingEquipped with three USB 3.0 ports, the Orico adapter can transfer large files at speeds of up to 5 Gbps, allowing them to be transferred in mere seconds. In addition, with 100W Power Delivery (PD) technology, it provides extremely fast and efficient charging, ensuring your devices are always ready to go.Wide compatibility and stable connectionThe Orico 6-in-1 adapter is compatible with a wide range of devices such as mice, keyboards, printers, microphones and other USB accessories, making it extremely versatile. In addition, it provides a fast and stable Internet connection thanks to Ethernet technology, and supports SD and TF card reading. With the ability to share a larger screen, the adapter helps increase work efficiency, making it more productive and comfortable. ManufacturerOricoModel44323ColorgreyDimensions79 x 79 x 19.3 mmPorts6w1InputType-COutputUSB 3.0, Type-C, PD100W, HDMI-comConstruction materialAluminum, ABSCable length0.2 mIndicator colorblueCompatible systemsWindows, Linux, Mac OS, Android
FEATURES • Exploring the New Era of 2.5G: supports internet speed of up to 2.5Gb and enables your devices to run at full speed. Enjoy unbelievably fast downloads with NAS, fluent 4K/8K streaming, immersive gaming.• Faster, Smoother, Cooler Realtek Chip: equipped with an updated RTL8156BG chip, ensure the network always at peak run. When running 2.5Gb at full speed, it consumes low power, reduce heat dissipation and provide stable performance.• Flexibiliy Upgrade to 2.5G: immediately upgrade your 1Gb network, just pair it with 2.5Gb-capable devices like switches and routers to give your aged devices new life! This flexibility is an advantage for you transitioning to higher-speed network.• Sleek, Strong, Stunning: this ethernet adapter for laptop adopts high-quality aluminum. The ports are resistant to plugging and unplugging and the reinforced design makes it very durable for use. Indicator lights make transmission status clear at a glance.• Widely Compatible: adapter performs as a rugged, communications bridge between the laptop, desktop, and an Ethernet network, like MacBook Air/Pro, Dell XPS, iMac, Mac Mini and more. SPECIFICATIONS Input: USB-A 3.0 Male (speed up to 5Gbps)Output: RJ45 2.5G Ethernet PortSupport: 10/100/1000 Mbps & 2.5G networkPlug and playSupported systems: Mac OS/Windows Aluminum case
Creality Falcon A1 10W Laser Engraving MachineCreality Falcon A1 is an advanced 10W laser engraving machine that guarantees high quality cutting. Thanks to its integrated camera and intelligent material recognition, using it will not be a problem for you. The Falcon A1 offers a workspace of 305 × 381 mm and a maximum working speed of up to 600 mm/s . What's more, it works with a wide range of materials - from wood and acrylic, to glass and leather, to metal or jewelry.Ready to work without complicated setupThe Creality Falcon A1 comes pre-assembled and calibrated, saving up to 95% of the time needed to get the device ready for use. This is a huge convenience, especially for novice users or those who want to start working immediately after unpacking. Everything works on a plug & play basis - just plug in the power, insert the material and start engraving.Precision camera and intelligent material recognitionThe device is equipped with a full-range HD camera that gives an accurate view of the entire work area. The camera is calibrated at the factory, making material positioning and project preparation extremely easy. In addition, it automatically recognizes materials using a QR code system and independently selects the optimal laser operation settings, eliminating the need for manual configuration.10W power and one-step cuttingThanks to its dual laser beam technology, the Falcon A1 can cut as much as 9.6 mm of acrylic or 6 mm of wood in one go. This not only saves time, but also guarantees precise cutting without the need for repetition. The laser's precise spot (0.06×0.08 mm) makes it possible to make highly detailed engravings - ideal for both personalizing items and creating artistic designs.Fast and smooth operation thanks to the CoreXY systemThe high speed of operation (up to 600 mm/s) is made possible by the CoreXY motion mechanism. This system is based on two motors that ensure smooth and stable head movement, which translates into speed without sacrificing precision.Various application possibilitiesFalcon A1 can handle a variety of materials: wood, acrylic, glass, leather, metal, fabric, plastic or jewelry. As a result, it can be used for personalizing objects, creating decorations, engraving on cylindrical surfaces (with the help of an additional rotary kit), as well as for precision cutting.Additional accessories for even more convenienceYou can upgrade the Falcon A1 with a rotary kit that allows you to engrave cylindrical objects - such as glasses, bottles or cups. There's also a HEPA-filtered air purifier that removes 99.97% of pollutants, improving the comfort of working in closed rooms. Creality also offers a wide range of proprietary materials, tailored for compatibility and engraving quality.Full compatibility and intuitive operationFalcon A1 works with the popular LightBurn, LaserGRBL and Falcon Design Space software and runs under both Windows and macOS. It supports files in jpg, png, bmp, svg, dxf and many other formats, allowing you to work seamlessly with a variety of graphic designs.IncludedLaser engraving machineTubeClampAir Assist moduleSilicone tubePower supplyLime plywood (300×300×3 mm) + QR card for materialsTest calibration cardCable for connecting the rotating setMulti-level focusing blockUSB-A to USB-C cableAnti-static brushAllen wrenchUser manualMounting tools (M1.5 / M2 / M2.5 / M3 allen keys, tweezers, dust-free cloth, protective lens, adapter from USB-A to USB-C, safety keys x2) ManufacturerCrealityModelFalcon A1Laser spot0.06 × 0.08 mmPower max.120 WLaser wavelength455 ±15 nmOptical power10 WLaser classClass 1 (FDA)Device dimensions567 × 468 × 196 mmEngraving softwareLightBurn, LaserGRBL, Falcon Design SpaceWeight of the device15.5 kgOperating systemWindows / macOSInput voltage100-240 V, 50-60 HzSupported file formatsjpeg, jpg, png, bmp, svg, dxf, etc.Output voltageDC 24V/5.0ASupported materialsCardboard, wood, bamboo, rubber, leather, fabric, acrylic, glass, plastic, etc.Operating temperature5°C - 35°CEngraving platform305 × 381 mmLaser sourceLaser diode
USB-C 3.1 ja RJ45 Ethernet kaabelühendab ruuteri, modemi või võrgukommutaatori sülearvuti, tahvelarvuti või nutitelefoni USB-C™ porti.Tehnoloogiauuendus, mis lihtsustab teie elu: uuenduslik adapterkaabel on kompaktne Ethernet-lahendus kõikidele USB-C™-seadmetele, millel puudub oma RJ45-port. USB-pistikusse sisseehitatud nutikas nutikiip asendab varem vajaliku, keerulise RJ45-USB-C™-adapteri. Kaabli abil on Ethernet kohe saadaval ilma täiendavate draiveriteta. Lisaboonus: USB 3.1 kaabel ühildub Apple'i Thunderbolt™ 3 pordiga.LAN-kaabel tagab stabiilse traadiga internetiühenduse USB-C™ seadmetele, millel puudub oma võrguport.USB 3.1 abil saavutab kaabel SuperSpeed andmeedastuskiiruse kuni 5 Gbit/s.CAT 6 kaabel on tänu fooliumvarjestusele (FTP) tõhusalt kaitstud häirete eestUSB-kaabli punutud, vastupidavast tekstiilist ümbris on meeldiva tunnetusega ja säästab tundlikke pinduKvaliteetsed ja vastupidavad metallpistikud koos paindumiskaitsega tagavad eriti pika kasutusaja.USB-C™ pesa ühildub populaarsete kaubamärkide, nagu Lenovo, HP või Dell, sülearvutitega, samuti Windowsi, macOSi ja Androidiga ning enamiku Thunderbolt™ 3 seadmetega, nagu Apple MacBook või iPad.Pange tähele: internetikaabel ei sobi mängukonsoolide jaoks ümberpööratavaks kaabliks
The HX Monitor Arm is the perfect accessory to add flexibility and superior ergonomics to your monitor or TV. The HX features a new post design, frees up space and allows positioning of your display for greater productivity.Sleek and streamlined, it accommodates large monitors weighing up to 42 lbs (19 kg). Extension/retraction motion and height adjustment capability promote user comfort.- Increases viewing comfort: Helps reduce eye, back and neck strain- Sleek new post design- Patented CF motion technology provides premium ease-of-use display adjustment- Cable management feature routes cables tightly under the arm and through the extension, out of the way- Eliminates scrolling: Rotate screen for portrait viewing of photos and documents- Rotation-stop on base limits range to 180° and prevents monitor from making contact with wall- Folding arm frees up space in constrained areas- Upgrade this arm with the HX Triple Bow Kit to create a triple monitor arm- Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free height adjustmentMaksimaalne kaal (mahutavus)19 kgMaksimaalne ekraanisuuruse sobivus106,7 cm (42")SobilikTVPaigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)400 x 400 mmToetatud ekraanide arv1PaigaldusBolt-throughVESA-paigaldusliidesed75 x 75,100 x 100,200 x 100,200 x 200,400 x 200,400 x 400,400 x 300 mmKaldenurk-75 - 75°Liikumisulatus-180 - 180°Rotatsiooni nurk360°Toote värvValgePakendi laius305 mmPakendi sügavus488 mmPakendi kõrgus178 mmPakendi kaal8,3 kg
MAX Ottocast CA361-C4 car TV adapterThe Ottocast CA361-C4 car adapter is an innovative device that, with support for CarPlay Android Auto and HDMI devices, allows convenient access to a wide range of content - from navigation to mobile apps to movies and games. It's an indispensable solution for people who value comfort, functionality and top-notch entertainment.Universal compatibilityOttocast CA361-C4 supports up to 99% of CarPlay-equipped vehicles, regardless of their type. Whether you have an SUV, sedan, minivan or sports car, the adapter will be the perfect addition to your multimedia system. Thanks to the HDMI port, you can also connect various devices such as TV Sticks, game consoles and projectors, allowing for almost unlimited entertainment possibilities on the go.Various connectors for full functionalityThe device has an HDMI port that allows you to connect devices such as Google TV, Fire TV, Apple TV or media players. An additional USB 2.0 port is used to charge devices while providing constant access to power. Thanks to a cable with a USB connector, the adapter connects to cars equipped with CarPlay, allowing for easy content transfer and seamless integration into the vehicle's system. What's more, you'll find an adapter included that allows you to connect devices with a USB-C port.Entertainment at your fingertipsThe Ottocast CA361-C4 is a device that turns your car into a real entertainment center. Watch movies, play your favorite games or use apps such as Spotify, Netflix or YouTube on a screen built into your dashboard. With HDMI support, you can use the device as you would in a home theater, all without the need for complicated installation.Compact design and ease of useThe adapter features intuitive operation. Its installation is quick and easy - just plug the device into the car's USB port and connect it to the screen. The compact size makes the adapter fit perfectly into the car space without taking up much space.Includedadapter with USB-A cableUSB-A (female) to USB-C (male) adapteruser manual ManufacturerOttocastModelCA361-C4ColorblackCPUDual-core 1.0 GHz ARM Cortex A7SystemLinuxWi-Fi2.4 GHz + 5 GHzBluetooth5.0Operating temperature-20 ~ 75°CInput voltage5V (USB)InterfaceUSB-A 2.0, HDMIDimensions58 x 58 x 14 mm
Data Transfer Rate: 5 Gbps võrguseadeing Type1Data Link Protocol Supports: Gigabit Ethernet/Fast Ethernet/Ethernet LAN kiibistik153 võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u võrguseadeing Features: Hot Swap USB 3.1: 1(USB Type-C) LAN: 1(RJ-45) Requires operatsioonisüsteem: Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Android, Apple Mac OS X16 External värv: must kaasastarvikud16 mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.35 kg Retail Packaging Netokaal Carton1
Desk mounted adjustable monitor arm for 3 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 3 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 3 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27") Durable adjustable gas-springs suitable for monitors of 1 - 6 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
VGA male (15-pin) > VGA male (15-pin)high quality cable with separate shielded RGB video linesfull connected 3 coax (RGB) + 8 sync linesmax. resolution Full HD 1920x1080pwith 2 ferritesgold plated
With MicroConnect you get:- Great products at a great value- Short delivery time- Easy access to the part you want through our cable guidePistmik 1mini HDMIPistmik 2HDMISuguSisestatav konnektor/sisekonnektorToote värvMustKorpuse materjalPlastMuunduri tüüpPassiivneIsehäälestuvJah
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Bluetooth types: A2DP Frequency: 2,402GHz- 2,480GHz Interface: Toslink connector, Micro USB port Bluetooth version: 5.0 Dimensions: 68 mm x 13 mm x 13 mm Supported codecs: AAC, SBC, aptX Power supply: Micro USB port, 5V
2-in-1 xTool F2 laser engraving machineThe 2-in-1 xTool F2 laser engraving machine is equipped with a 15 W diode laser and a 5 W infrared laser, enabling fast and accurate engraving on more than 300 types of materials. It offers speeds of up to 6,000 mm/sec and a movement precision of 0.00199 mm, allowing detailed designs with high repeatability. The standard work area is 115 × 115 mm, and the built-in 50 MP camera enables positioning with 0.1 mm accuracy, minimizing material waste and reducing makeready time.Dual laser system - wide range of materialsThe use of two types of laser significantly expands material processing capabilities. The 15 W diode laser allows cutting wood or plastics, while the 5 W infrared laser is designed for precision engraving of metals, providing clear, darker results.High speed and detail qualityThe F2 model achieves speeds of up to 6,000 mm/s, allowing it to complete various types of projects in a very short time. For example, you can engrave a 13 × 13 mm pendant in just about 49 seconds, and a 71 × 95 mm Christmas card in about 3 seconds. In addition, the small size of the laser spot (0.08 × 0.06 mm for the diode laser and 0.03 × 0.03 mm for the infrared laser) allows you to achieve ultra-thin, even lines, clean edges and high resolution engravings. The device excels at reproducing fine details, high-contrast graphics and photos.Portable design and expandable working areaThe compact design (only 175 × 237 × 334 mm) and weight of 4.6 kg make the xTool F2 engraving machine very easy to transport and convenient to use in various places such as studios, stores and trade shows. The standard 115 × 115 mm working area works well for most projects and working with small items, and if needed, you can expand it to 400 × 115 mm with an optional expansion module ( sold separately). This allows you to realize larger projects and increase the efficiency of batch production.Intelligent 50 MP camera - full visualization of the work areaThe built-in 50 MP camera allows full visualization of the working area and precise alignment of projects with an accuracy of 0.1 mm. This ensures that the design is perfectly aligned the first time, reducing errors and minimizing material waste. The visualization system also includes an enlarged workspace when a dedicated expansion module is used, combining the standard field and the secondary space into one consistent preview. This solution makes it easier to create more complex designs!Engraving of round objectsA rotary attachment is also available for sale separately, which allows engraving cylindrical and spherical objects, such as cups, thermoses, baubles or rings. This solution enables full, even engraving around the entire surface of the object and expands the range of possible implementations.Safe operation and enclosed designThe xTool F2's fully enclosed housing reduces smoke and laser radiation emissions, allowing safe indoor use. So you can use the engraving machine at home, in the store or in the office without worry.Multiple applicationsThe xTool F2 engraving machine will be great wherever speed and repeatability are important. You will successfully use it for engraving jewelry, personalizing small products and creating decorations or utility accessories - both individually and in short series. Thanks to its mobile design, high working speed and high precision, the device allows you to carry out orders efficiently - also during fairs, events or directly at the point of sale. ManufacturerxToolModelF2Laser typeDiode laser 15 W + infrared laser 5 W 1064 nmOperation modeLaser engraving, laser cuttingSupported materialsPaper, wood, leather, dark opaque acrylic, plastic, gold, silver, platinum, brass, stainless steel, etc.Working area115 mm × 115 mm / 400 mm × 115 mm (with extension - sold separately)Maximum working speed6000 mm/sMaximum laser cutting capacityLime wood up to 15 mm (multi-pass cutting) / Acrylic up to 12 mm (multi-pass cutting)Built-in camera50 MP intelligent cameraPositioning methodPositioning by camera / Positioning by frameFocusing modeAutofocus / Manual focus (two point alignment)Viewing methodSmart camera preview / Quick live previewSupported softwarexTool StudioSupported operating systemsWindows, macOSConnection methodWi-Fi, USB, IPSupported file formatsSVG, DXF, JPG, JPEG, PNG, BMP, etc.Laser spot sizeDiode laser 15 W: 0.08 mm × 0.06 mm / Infrared laser 5 W: 0.03 mm × 0.03 mmMotion accuracy0.00199 mmMax input current24 V, 6 A, 150 WWeight of the device4.6 kgDevice dimensions175 mm × 237 mm × 334 mmSafety certificationClass 4 laser
Kaablispiraal 4-20 mm, läbipaistev 25 m Spiraalne polüetüleenlint juhtmestiku ja juhtmete kaitsmiseks ning paigalduse korrastamiseks. Suurus: Ø 4-20 mm Maksimaalne töötemperatuur: +85 ºC Värv: läbipaistev Müügipakett: 1 rull = 25 m
Neutrino Photo Trimmer - Encapsulated SafeCut™ blade for enhanced user safety - Trims up to 5 sheets of paper (A5, 80gsm) at a time - Extendable arm to support or measure A4 documents - Paper clamp minimises paper movement when trimming - Cutting guides for different size photos Model name NEUTRINO Binding type Plastic comb, Colour Black
Producer: HOCO Product Code: X20TYPEC3MBK Length: 3 m Color: Black Connection: Type-C to USB Hoco X1 Durable - Cable series has made from durable and Soft materials wich makes this cable series speciall adn very comfortable to use. Thanks to Durable and soft cable surface it has protection from tangle. COMPATIBILITY: UNIVERSAL - Compatible with all mobile phones and devices witch use Type-C data connection and charge standard! HOCO is a modern and high quality premium brand from Korea which is covering a wide range of the most important accessories for mobile phones and mobile devices . All Hoco products combines the reliability and durability, which managed to get through attention to the selection of the highest quality materials and components. HOCO products has bright and original design and technical solutions, which makes these products unique, and it will surprise You and will be usefull for use. Packed in HOCO Blister Package Designed in Hong Kong. Made in China. Manufacturer warranty: 12 months.
