DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.
Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.
The AXAGON PCES-SA4X4 PCI-Express controller extends your desktop PC with four SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Output: 4x independent Serial ATA port, SATA III 6G standard. 4x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Neomounts DS75-450BL2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450BL2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
2-Bays 2.5"/3.5" SSD/HDD Clone Station with card reader and USB-ACompatible with both 2.5"/3.5" HDDs and SSDs Supports standalone cloning without a computer Integrated card reader for CF and SD memory cards High-speed data transfer via USB connection Includes a power adapter for reliable operation.
Floor mat XL PremiumWide range of compatibilityThe Next Level Racing Premium XL floor mat is compatible with all current Next Level Racing cockpits, including Motion Plus, GTRacer Series, Go Kart Plus, Elite Series configurations and various Lite, F-GT and Flight Simulator models. The non-slip backing keeps the mat securely in place during intense racing or flying sessions. Thick premium carpet made from high quality polyester fibre for durability. Reflective logos reflect light for a striking visual effect. Universal fit for all Next Level Racing cockpits, adds a consistent and refined look to your setup.
Connectivity. Charge. StartThis USB-C travel hub lets you equip your laptop with five additional essential ports. This ultra-portable, slim, and compact hub delivers scalable power and plug-and-play connectivity with almost any brand, device, and operating system. Maximize your productivity wherever your work takes you.Small Hub. Big ConnectivityExpand a single USB-C port on your laptop to five ports (USB-C x 2, USB-A x 2, and HDMI) that support multiple devices and one external display up to 4K resolution at 60Hz. Enjoy universal plug-and-play connectivity with almost any brand or device and blazing-fast data transfer speeds of 10Gbps.Scalable PowerThis lightweight and compact hub is not only portable but also technologically advanced. Take one hub on the go to enjoy high-bandwidth connectivity and scalable power from your 65W, 90W, or high-power USB-C power adapter on your laptop, or power the hub from your device's USB-C port.Maximum Compatibility, Minimum ClutterWherever you are in the world, this highly portable, compact hub works with everything you work with. It supports multiple operating systems: Windows, macOS, Chrome OS, iOS, and Android. Connect almost any of your devices and keep your productivity charged whenever and wherever you need it.Designed for Our Shared FutureBesides powering multiple devices, this USB-C travel hub also has the power to help protect our planet. Each hub contains over 80% recycled materials and comes in FSC-certified packaging.
Universal Travel Adapter (EU), 12 W, White Lightweight and easy-to-use design: ideal for travel One-handed operation Universal travel adapter with 3 fast USB charging ports EU Schuko socket supports most EU power plug types USB Type-A charging ports support up to 12 W Includes US/UK/AU/CN power plugs, works in over 200 countries EU Schuko AC socket with child safety shutters Protected by a 10 A fuse (BS1362 compliant, spare fuse included) Note: Does not convert voltage or change mains frequency.
Full-motion TV wall mount 37-86" 60 kg UTV-04 Create a true home cinema or a professional conference space with the UTV-04 TV wall mount. This model is built for special tasks designed specifically for the largest and heaviest TVs on the market. It combines uncompromising steel durability with exceptional adjustment flexibility. By choosing the UTV-04, you gain the confidence that your large screen hangs safely while you maintain full control over the viewing angle. Screen Size: 37-86" This mount is dedicated to large displays. It has been engineered to stably support a wide range of sizes from medium 37-inch screens up to massive 86-inch panels. Whether you have a large TV in your living room or a presentation monitor in your office, the UTV-04 provides a solid foundation. Its a long-term investment that will still perform reliably even after upgrading to a newer and larger model. VESA Compatibility The UTV-04 mount offers broad compatibility with the VESA (Video Electronics Standards Association) standard an international specification defining the mounting hole pattern on the back of your TV. Thanks to its well-designed mounting plate, the mount fits most large televisions, supporting hole patterns from 200 × 200 mm up to 600 × 400 mm (commonly used in very large screens). Maximum Load Capacity: 60 kg When it comes to large televisions, safety is absolutely essential. The UTV-04 is a heavy-duty construction with an impressive maximum load capacity of 60 kg. Its exceptional strength comes from reinforced, thickened steel: 2.5 mm for the wall base (ensuring secure anchoring into the wall), 1.8 mm for both the VESA plate and the mount arms (for comparison, standard mounts often use 1.2 mm arms). The entire structure is coated with durable powder paint, providing an elegant black finish and resistance to damage. Tilt Range: +5° ~ -15° Despite its size and lifting capacity, the UTV-04 offers an impressive range of adjustments, allowing you to position the screen with precision. Tilt: Adjustable from +5° to -15°, helping eliminate glare and achieve the perfect viewing angle especially useful when the TV is mounted high on the wall. Swivel: The sturdy, extendable arm allows you to adjust the distance from the wall between 100 mm and 500 mm and rotate the screen 60°. This is ideal for open spaces where you want to watch TV from different areas (e.g., the living room and kitchen). Level Adjustment: The mount includes a 2° screen leveling function. This extremely useful feature lets you perfectly straighten the TV after installation, correcting any minor drilling imperfections. Package Contents Inside the box, youll find a complete installation kit: Reinforced UTV-04 TV mount, A set of screws and wall plugs for various wall types and TV models, A level to help with precise installation, A user manual that guides you step by step through the mounting process.
USB 2.0 A-plug to Micro B-plug 6ft cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number CCP-USB3-AMBM-10 Gembird USB 3.0 A- B 3m cable Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Standard USB 3.0
Original part number 2L-5202U Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 2m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 2 m
Original part number UA0125 Product name LOGILINK - 10-Port USB2.0 Hub with switch ON / OFF Producer LogiLink Class of product USB hub Number of ports 10 Supported USB standards USB 1.1USB 2.0 Additional information 10-Port USB2.0 Hub with switch ON / OFFCompliant with USB 1.1/2.0Equipped with a detector and overload protectionLED indicatorsExternal power supply included (5V/3.5A)Plug&Play deviceCompatible with Windows and MAC OS
Original part number PP6-7.5M Product name Gembird patchcord RJ45, cat. 6, FTP, 7.5m, gray Producer Gembird Class of product Patchcord network cable Wiring type FTP/STP - shielded 4 twisted-pair cable Length 7.5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Cross-Over No Boot non-snag-proof Colour Grey
Original part number PP12-50M Product name Gembird patchcord RJ45, cat.5e, UTP, 50m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 50 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Boot non-snag-proof Colour Grey
3M PF23.0W9 Black Privacy Filter for desktops with 58.4 cm (23") display sizeThe Privacy Filters PF23.0W9 are designed to fit 16:9 aspect ratio widescreen desktop monitors with a viewable screen size of 23.0". Using 3M microlouver technology the filter gives full 60° privacy protection on either side, protecting sensitive information from unauthorised viewing. With a simple attachment system the filter can be easily removed for screen sharing.3M microlouver privacy technology provides privacy screen protection for sensitive data.Reversible glossy or matte screen finish. Matte screen finish reduces discomfort from screen glare.Two easy on, easy off attachment systems. Filter stays in place when notebook is closed.Suggested applications:Desktop monitor user working in sensitive areas. Open plan offices, open reception areasProtecting confidential/sensitive information - customer, commercial, medical, government, e-examination Type Privacy Filter Compatible with Universal Screen Diagonal (cm) 58,4 Screen Diagonal (inch) 23 Aspect Ratio 16:9 Quantity 1 Colour Black
3M PF22.0W Black Privacy Filter for desktops with 55.9 cm (22") display sizeThe Privacy Filters PF22.0W are designed to fit widescreen desktop monitors with a viewable screen size of 22". Using 3M microlouver technology the filter gives full 60° privacy protection on either side, protecting sensitive information from unauthorised viewing. With a simple attachment system the filter can be easily removed for screen sharing.3M microlouver privacy technology provides privacy screen protection for sensitive data.Reversible glossy or matte screen finish. Matte screen finish reduces discomfort from screen glare.Two easy on, easy off attachment systems. Filter stays in place when notebook is closed.Suggested applications:Desktop monitor user working in sensitive areas. Open plan offices, open reception areasProtecting confidential/sensitive information - customer, commercial, medical, government, e-examination Type Privacy Filter Compatible with Universal Screen Diagonal (cm) 55,9 Screen Diagonal (inch) 22,0 Aspect Ratio 16:10 Quantity 1 Colour Black
Neomounts by Newstar CPU-D200. Tüüp: Lauale paigaldatav protsessori alus, Maksimaalne kaal (mahutavus): 30 kg, Toote värv: Must. Laius: 230 mm, Laiuse reguleerimise ulatus: 130 - 230 mm, Kõrgus: 540 mm. Kartongist põhipakendi ...
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 type C (naissoost) 2-ühenduse tüüp: Lightning värv: must Lisaandmed: USB type-C (naissoost) to 8-pin (male) adapter plug, Enables connecting any USB-C peripherals to a 8-pin Apple device , mõõtmed
Tootja: DIGITUS Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over ethernet splitter sisendpinge: 48 V AC väljundpinge: 5 V DC, 9 V DC, 12 V DC Real power: 24 vatti Toetatud protokollid ja standardid: IEEE 802.3at - Power over Ethernet+ Lisaandmed: Ethernet Speed kõrgus: 23 mm laius: 55 mm sügavus: 80 mm Netokaal: 80 g
Tootja: LogiLink Tootegrupp: USB hub ports: 3 Supported USB standards: USB 3.0 Lisaandmed: USB 3.0 Hub, 3x USB ports, Compliant to USB 3.0 / USB 2.0 / USB 1.1 spetsifikatsioon, toetab USB 3.0 High-Speed Kuni 5 Gbps, koos kaart Reader function for SD kaarts (Kuni 2 TB),, as well as microSD, M2, MS (Duo/Pro) ja CF kaarts, Multi-LUN R/W kaart reader, ühildub Mac OS/Windows/Chrome OS/Linux, toiteplokk through USB connection, kaabli pikkus laius: 85 mm kõrgus: 42 mm sügavus: 48 mm Lisainfo: andmeleht
