With the iFixit Soldering Aid, you save time and keep your nerves in check when soldering delicate cables or wires together. Especially if you have unsteady hands, the iFixit Soldering Aid provides reliable support. To prevent unwanted movement, additional magnets are integrated into the base, ensuring a secure hold on magnetic surfaces. The soldering aid is suitable for cables with a diameter of up to 4 mm. This allows you to easily and conveniently solder both fine electronics and somewhat thicker wires. Even small mishaps are covered: thanks to its heat-resistant silicone, the soldering aid can withstand contact with a 350°C soldering iron for up to 30 seconds.
FNIRSI 1013D 7" portable tablet oscilloscopeThe FNIRSI 1013D portable oscilloscope with a 7" touch screen, 2 measurement channels, 100 MHz bandwidth and 1 GSa/s sampling rate allows precise signal analysis in service, workshop and electronic device design. The device is equipped with an easy-to-read 800x480 TFT screen, automatic one-button signal adjustment, and waveform recording function, allowing convenient and fast measurements anywhere. Support for analog and digital signal analysis makes it suitable for equipment service and DIY applications. The built-in 6,000 mAh lithium battery allows the device to operate for about 4 hours.Clear touchscreenThe FNIRSI 1013D features a 7-inch TFT LCD screen with 800x480 resolution, providing high brightness, contrast and accurate waveform reproduction. Touch operation of the screen allows quick zooming, panning and changing of measurement parameters, speeding up work without the need for physical buttons. The screen is made with capacitive technology, known from modern smartphones, which ensures smooth operation and no delays when changing settings. The cursor measurement function allows accurate reading of signal amplitude, period and frequency without the need to convert units from the screen's grid, which is especially useful with distorted signals or rectangular waveforms with noise.Two measurement channelsThe device is equipped with two measurement channels with an input impedance of 1 MΩ, which allow the analysis of two signals simultaneously, making it easier to compare the input and output of amplifier circuits, converters or PWM signal analysis. This makes the range of applications much wider than with single-channel models. You can also perform Lissajous pattern analysis in XY mode, which allows you to determine the frequency, amplitude and phase shift between two groups of signals.Automatic signal adjustmentThe one-button automatic adjustment function allows you to instantly adjust signal measurement parameters without manual calibration. As a result, the FNIRSI 1013D can adjust the settings for a 1 Vpp signal within 1 second, saving time and increasing work efficiency. The built-in fuzzy logic algorithm ensures high accuracy and automatically places the signal in the center of the screen, making analysis much easier.Protection against damageThe oscilloscope uses built-in surge protection modules up to 400 V to prevent accidental damage to the device when measuring high-voltage signals, even if the probe is not set to 10X mode. This allows you to safely test power and high-voltage circuits.Data storage and exportThe FNIRSI 1013D offers an internal memory of 1 GB, which allows you to store up to 1,000 images and 1,000 waveform sets. This allows you to quickly save one-touch measurement results and export them via USB to a computer for further analysis. The waveform manager function allows you to view thumbnails of stored waveforms, zoom in, delete and analyze them with a cursor directly on the device - similar to a smartphone gallery, adding to the convenience of data management.Advanced triggering functionsThe oscilloscope offers a full set of trigger modes - Auto, Single and Normal. This arrangement allows you to test sudden pulsed ignition signals, IR remote control signals or sine wave signals depending on the selected mode, making the device a versatile diagnostic tool. You can also set the trigger edge (rising/falling) and trigger channel, allowing you to precisely capture the signal fragments of interest.Included:FNIRSI 1013D portable touchscreen oscilloscopeProbe (100 MHz) x2USB chargerUser manual ManufacturerFNIRSIModel1013DNumber of channels2LCD screen size7 inchesLCD resolution800 x 480Display technologyTFTBandwidth100 MHzSampling frequency1 GSa/sHighest test voltage1X: 40V10X: 400VCursorXY positionTrigger YRoll modeSupportedAutomatic one-button settingSupportedWaveform storage1000 images + 1000 waveformsWaveform managerSupportedVoltage accuracy± 2%Rise time< 3 nsMemory depth240 KbitInput resistance1 MΩSensitivity50 mV ~ 500 VTime base50 s ~ 10 nsTrigger modeSingle / Normal / AutoTrigger edgeAscending / DescendingCouplingAC / DCFrequency accuracy±0,01%Parameters12 types in totalBatteryLithium with a capacity of 6000 mAhOperating time4 hoursExpansionUSB exportChargingUSB-C 5V 2A/3A/4ADimensions184 x 124 x 50 mm
FNIRSI SG-004A mini signal generatorThe FNIRSI SG-004A is a compact signal generator that combines functionality with precision and speed. The device provides measurement accuracy of ≤0.2% and instantaneous reading of results in as little as one second. With multi-function operation and an easy-to-read backlit screen, the SG-004A makes debugging and testing easy in a variety of conditions, whether you're working with PLC systems, DCS or calibrating instruments.A clear view of every parameterEquipped with a 2.4-inch HD display with adjustable brightness, the generator offers a clear view of parameters even in difficult lighting conditions. The various operating modes are additionally color-coded with backlighting, making operation significantly easier. Semi-transparent buttons provide convenience of use and a modernistic look.Pocket-sized format, professional capabilitiesThe SG-004A weighs just 165 grams and measures 112 x 82 x 27 mm, so it easily fits in a pocket or tool bag. It's perfect for field engineers and technicians who need a reliable and mobile diagnostic tool on hand.The versatility you needThe FNIRSI SG-004A generator supports many types of signals and modes of operation - from current and voltage input and output testing, to speed simulation and programming, to actuator position adjustment and inverter diagnostics. It's a multitasking tool ready for any challenge. What's more, with real-time curve view, you can track changes in input and output signals in real time. This facilitates analysis and ensures faster detection of potential abnormalities.Military-grade durability and convenience of useThe device is designed for intensive use. Equipped with drop protection technology, a USB-C charging port, silicone non-slip components and an easy-to-read power level indicator, it guarantees maximum convenience during every use. The whole thing is complemented by a standby mode that provides up to 24 hours of standby time.Includedmini signal generatorcrocodile clips x4USB charging cableType-C cableuser manual ManufacturerFNIRSIModelSG-004ADimensions82 x 27 x 112 mmWeight165 gColorYellow, blackScreenLCDScreen size2.4"InterfaceType-CInput5VBattery capacity3000 mAhStandby time24 hours
Fanttik X8 Apex Portable CompressorThe Fanttik X8 Apex is a portable compressor designed for precise and instant inflation of tires and other items. It can inflate a tire approximately 26.3" in diameter from 28 to 33 PSI) in just 56 seconds, and has an operating accuracy of ±1 PSI, making it a precise device.High performance and long operating timeThanks to its capacious battery and innovative cooling system, the X8 Apex can run continuously for 40 minutes in typical outdoor conditions, pumping up to 16 tires without cooling breaks. This is ideal for long trips or outdoor work.Simple one-button operationThe unit offers four pre-set pumping modes (bike, motorcycle, car, ball) and three pressure units (PSI, KPA, BAR). Simply select a mode and the compressor automatically stops when the preset pressure is reached, eliminating the need for constant monitoring.Long reach, high resistance hoseThe X8 Apex is equipped with a 5.5-meter long, heat-resistant hose that can easily handle tires up to R22 size at pressures up to 150 PSI. This allows you to inflate tires from any side of the vehicle, even in hard-to-reach places.Additional functions - powerbank and flashlightThe compressor also serves as an emergency power source - it has a USB-C port (Universal Serial Bus Type-C, universal connector for data and power; 5V/3A input) and a USB-A port (Universal Serial Bus Type-A, universal connector for data and power; 5V/2A output) for charging your phone or other mobile devices. An LED (Light Emitting Diode, light emitting diode) flashlight generating continuous and SOS light is placed on top for easy use at night and in emergency situations.Includedportable compressorUSB charging cablehosepumping needleSchrader-Presta valve adapterstorage caseuser manual ManufacturerFanttikModelX8 ApexDimensions200.5 x 63.5 x 63.5 mm (without hose)Pressure range3-150 PSI / 0.2-10.3 BAROperating temperature0°C - 45°CStorage temperature-10°C - 45°CHose length460 mmBattery capacity11.1V / 28.86 WhNoise levelless than 80 dB at a distance of 1 mInput voltage5V/3AOutput voltage5V/2AInput portUSB-COutput portUSB-ACharging time
The chassis stand for the Tower 600 Mocha Mousse includes a base cover for the case and a display stand. It allows users to position their Tower 600 Mocha Mousse horizontally, making it easy to customize the case and create a unique experience. The base plate also features a filter to protect against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material provides long-lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to offer a secure grip and prevent unwanted sliding during use.
The Thermaltake GR300 monitor mount is designed for the Thermaltake GR300 racing simulator cockpit and offers a complete monitor installation solution for ambitious racing gamers. This monitor mount is made of powder-coated steel with a load capacity of up to 35kg. It supports the installation of 32"-50" monitors and offers racing gamers the most flexible setup to create an immersive simulated racing environment. The GR300 monitor mount is height-adjustable, allowing the setup to be adapted for the perfect viewing angle and enhanced immersion. The mount supports VESA standard sizes: 75 x 75 mm, 100 x 100 mm, 200 x 200 mm, 300 x 200 mm, 400 x 200 mm.
The Thermaltake GR300 Monitor Mount is designed for the Thermaltake GR300 racing simulator cockpit and provides a complete monitor installation solution for ambitious racing gamers. This monitor mount is made of powder-coated steel with a load capacity of up to 35kg. It supports the installation of 32"-50" monitors and offers racing gamers the most flexible setup to create an immersive simulated racing environment. The GR300 Monitor Mount is height-adjustable, allowing the setup to be customized for the perfect viewing angle and enhanced immersion. The mount supports VESA standard sizes: 75 x 75 mm, 100 x 100 mm, 200 x 200 mm, 300 x 200 mm, 400 x 200 mm.
CSV-2555 7-1 USB-C® to HDMI™ Hub 4K60Hz PD3.1 140W 1m/3.28ft The Club 3D® CSV-2555 is a hub designed for users with high-power laptops who want a clean desk setup. Connect your essentials like power, Ethernet, and display behind your desk or monitor and use 1-meter USB-C® cable for all your needs. Declutter Your Desk: The extended 1m (3.28ft) cable gives you the freedom to tuck the hub out of sight for a clean, professional workspace, while keeping essential ports exactly where you need them. High-Speed Power Delivery: By supporting a Power Delivery of up to 140W, this hub can handle even the most power-hungry laptops. Compact, Travel-Ready Design: A compact design that slides easily into a laptop sleeve or pocket. Its lightweight construction makes it the perfect tool for commuters and people who need full desktop functionality without the bulk. Broad Connectivity for Your Basics: Connect your devices like a mouse, keyboard or pendrives simultaneously with ease. The dual USB-A port eliminates the frustration of constant cable swapping.
CSV-1009 DisplayPort™ 2-in-1 Bi-directional Switch 8K The Club 3D® CSV-1009 is a versatile DisplayPort™ switch that allows you to switch between two sources on one screen or route one source to either of two screens at 8K resolution. DisplayPort™ 2-in-1 Bi-directional Switch for 8K; it can switch either of two sources to one display or switch one source to either of two displays. Supports the DP1.4 specification. Video resolution up to 7680x4320P at 60Hz. Supports HDR, DSC, and HDCP pass-through. The toggle button lets you quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides show which port is selected for operation. The longer/thinner the cable, the greater the risk of signal instability. To ensure maximum performance, use our Club 3D® cables. Power can be drawn through the DP male port from the connected device. If some devices are not compatible with power supplied via the DP male port, power can instead be supplied to the switch via the Type-C® female port.
Sobib sülearvutile ja 17–32" monitorile • Monitori maksimaalne kaal kuni 9 kg • Vedruabiline kõrguse reguleerimine • Lauaplaadi servale või läbi laua kinnitatav • Kasutusohutus TÜV-sertifikaadiga
• Host interface: USB Type-C • Hub interfaces: 3.5mm, DisplayPort, HDMI, RJ-45, USB 2.0 Type-A, USB 3.2 Gen 1 (3.1 Gen 1) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-C • Ports quantity: 14 • 10000 Mbit/s HD type: 4K Ultra HD 120 Hz • USB Power Delivery (USB PD) • Card reader integrated MicroSD (TransFlash), SD • Silver Aluminium
• Heavy-Duty Mount for Extra-Large TVs: Supports displays up to 100-inch and 187.4lb (85kg) making it ideal for meeting rooms, AV walls, and digital signage; VESA compatible up to 800x500mm for broad display support • Maintain Secure Support for Oversized Screens : Television mount collapses to 4.1in (10.5cm) from the wall and extends to 21.6in (55cm) for access behind the TV; Dual-stud (16in spacing) and dual-arm design ensure safe mounting and smooth motion • Fine-Tune Viewing Angles: Tilt +2°/‑12° and swivel +/-60° for effortless post-install adjustments and perfect leveling; Dual articulating arms ensure smooth, stable motion • Supports Multiple Wall Types: TV bracket includes wall template, screws, anchors, spacers, and tools for mounting on wood studs (16in spacing), brick, or concrete; Built-in cable management keeps customer-facing setups tidy • The IT Pro's Choice: Our TV wall mounts are tested in our Innovation Lab for reliable, long-lasting performance and stability in professional environments, from conference rooms to digital signage; Backed by free lifetime 24/5 multilingual assistance
• VESA compliant: Supports mounting patterns up to 100 × 100. • Strong load capacity: Holds monitors up to 8 kg. • Height adjustment: Move the screen to an ergonomic viewing level. • Tilt adjustment: Fine-tune the angle for comfortable viewing. • Cable management: Keeps wires organized and out of sight. • Free-standing design: Sits securely on any desk with no clamping or drilling. • Keyhole Pattern: allows for easy installation
• Compatibility: 17–32″ monitors • Capacity: Max load 9 kg • VESA: Up to 100×100; standards compliant • Motion: 360° rotation with tilt/swivel/height adjust • Mechanism: Gas spring for smooth, counterbalanced movement • Mounting: Clamp or grommet • Cable Mgmt: Built-in routing for a tidy setup
• Dual display support: fits two 13–32″ monitors • Mounting options: desk clamp or grommet • Max load capacity: 10 kg • Max VESA: 100×100 (75×75 compatible) • Full motion: tilt, swivel, and 360° rotation • Height adjustment for ergonomic alignment • Integrated cable clips for tidy routing • VESA standards compliant for quick fit
• Maximum weight capacity: 15 kg • Wall • Minimum VESA mount: 75 x 75 mm Maximum VESA mount: 100 x 100 mm • Number of displays supported: 1 • Anthracite, Silver
An elegant way to display your TV The practical and stylish Maclean MC-180 floor stand for TVs ranging from 37 to 80 inches is an excellent alternative to classic wall mounts. Its minimalist design in classic white blends well with modern interiors, audio-visual equipment, and office furnishings. Its sleek form gives the stand an elegant look, while its sturdy construction ensures stability during everyday use. Wide compatibility with popular TVs The stand is designed for a wide range of TVs equipped with VESA mounting standards ranging from 200x200 to 600x400 mm. It supports, among others, popular VESA hole patterns such as 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x200, 600x300, and 600x400 mm, making it compatible with many LED, LCD, and Smart TV models. It works seamlessly with devices from the most popular manufacturers, such as Samsung, LG, Sony, Philips, Panasonic, TCL, Hisense, Sharp, Xiaomi, and JVC.
• Adjustable height and angle for optimal ergonomic positioning • 360° rotating base for flexible viewing and working positions • Anti-slip pads protect your device and prevent sliding • Aluminum construction for durability and efficient heat dissipation • Wide compatibility for tablets and smartphones
Lisage täiendavaid HDMI over IP-vastuvõtjaid, et luua suuremaid võrgustatud jaotussüsteeme. Lihtne, skaleeritav lahendus 1-st kuni paljudele paigalduste arendamiseks Toetab kuni 1920x1080@60Hz resolutsiooni Toetab saatja infrapuna laiendamist 2-aastane garantii IP laiendajad pakuvad usaldusväärset HDMI-signaalide laiendamist võrguühenduses, võimaldades punktist-punkti ja segakonfiguratsioone, kui neid kombineeritakse võrguseadmetega, näiteks kommutaatoritega. IP-ühenduse kasutamine tagab odava ja skaleeritava pikenduslahenduse, mida saab hõlpsasti seadistada mitmesuguste väikeste või suuremate stsenaariumide jaoks. Lindy HDMI & IR over IP-vastuvõtja on täiendav lahendus HDMI-signaalide laiendamiseks suuremate vahemaade taha kohaliku võrguühenduse kaudu ja skaleeritavate IP-installatsioonide loomiseks, kasutades mitut vastuvõtjat, kui neid kombineeritakse 38398 ja võrguseadmetega. Punkt-punkt ühendusena toetab laiendaja kuni 150m kaugusi, kasutades Cat.6 kaablit, või kui seda kombineerida võrgukommutaatoriga, saab seda laiendada palju suuremate jaotussüsteemide jaoks kuni 3-kihiliste võrguseadmetega. Vastuvõtjate lisamine annab täiendavat paindlikkust, et levitada sisu erinevatesse kohtadesse või kaugemal asuvatele ekraanidele, mis sobib suurepäraselt kasutamiseks jaekaubanduses, ühendatud kontoriinstallatsioonides või haridusasutustes. Toetades kuni Full HD 1920x1080@60Hz 4:4:4 8bit, pakub see laiendaja kvaliteetset sisu, mis sobib hästi silmatorkavaks digitaalseks märgistamiseks, elamute paigaldamiseks või AV jaotamiseks haiglates. Technical details Specifications AV Interface: HDMI Interface Standard: HDMI 1.3 Supported Bandwidth: 6.75 Gbps Maximum Distance: 150m (492.12ft) Maximum Resolution: 1920x1080@60Hz 4:4:4 8bit HDCP Support: 1.4 EDID Pass Through: - Supported Audio: 2 Channel PCM Separate Audio Ports: - IR Support: 20-60 kHz CEC Support: - Serial Interface: - Transmission Protocol: IP (H.265 video compression) Transmission Medium: 1 x Cat.5e/6 Laser Class (only for Fibre): - Wavelength (only for Fibre): - Chipset: SSD203D Special Features: - Connectors Transmitter Input: - Transmitter Output: - Receiver Input: RJ45 (Female), IR (Female) Receiver Ouput: HDMI (Female) Bidirectonal Ports: - Power: 5.5/2.1mm DC socket Physical Properties Dimensions WxHxD: 88x61.2x16.5mm (3.46x2.41x0.65in) Housing Material: Metal Nett Weight: 0.236kg (0.52lb) Operating Temperature: -10°C - 50°C (14°F -122°F) Storage Temperature: -20°C - 60°C (-4°F - 140°F) Humidity: 20 - 90% RH (non-condensing) Power Requirements: 5VDC 1A Colour: Black Miscellaneous Packaging Type: Carton Box Packaging Dimensions: 146x105x65mm (5.75x4.13x2.56in) Gross Weight: 0.357kg (0.79lb) Warranty (Years): 2 Product Compliance: CE, UKCA, FCC, RoHS, REACH & California Proposition 65 Package Contents Receiver unit IR receiver cable, 1.5m Multi-Country Power Supply (EU, UK, US & AUS) Lindy manual Purchasing Information No. 38399 EAN: 4002888383998
CCF-USB2-AM5P-6 Premium quality USB 2.0 A-plug MINI 5PM 6ft cable with ferrite core USB 2.0 cable A plug/mini-USB 5PM 6ft cable 30u" gold-plated contacts suitable for USB 2.0 high-speed data transfer Ferrite core filter
