The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
xTool SafetyPro™ AP2 Smoke AbsorberThe xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.Powerful, three-stage filtrationThe xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.Quiet operation for complete focusWith low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.Sealed design and easy operationThe AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.Mobility and compatibilityThe xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.Create in a healthy environmentWith the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.IncludedP5010391 x1Filter set x1Pipe clamp x3Smoke exhaust pipe x1Screw set x1Power cable x1Pipe connector x2Wall connector x1Screwdrivers (Phillips and flathead) x2User manual x1 ManufacturerxToolModelP5010391Adapted machineP2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1Product size290*491*542mmProduct weight20.7 kgControl modeTouch button, four adjustable gearsPre-filtration systemCyclone separationRated power220WFilter layersSuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filterNoise55dB
Original part number CC-HDMI-DVI-10 Product name Gembird HDMI to DVI male-male cable with gold-plated connectors, 3m, bulk pack Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Video HDMI plugs 1x male HDMI A-type (19-pin, Single Link) DVI plugs 1x male DVI-D (Single Link) /18+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
USB-C 3.1 ja RJ45 Ethernet kaabelühendab ruuteri, modemi või võrgukommutaatori sülearvuti, tahvelarvuti või nutitelefoni USB-C™ porti.Tehnoloogiauuendus, mis lihtsustab teie elu: uuenduslik adapterkaabel on kompaktne Ethernet-lahendus kõikidele USB-C™-seadmetele, millel puudub oma RJ45-port. USB-pistikusse sisseehitatud nutikas nutikiip asendab varem vajaliku, keerulise RJ45-USB-C™-adapteri. Kaabli abil on Ethernet kohe saadaval ilma täiendavate draiveriteta. Lisaboonus: USB 3.1 kaabel ühildub Apple'i Thunderbolt™ 3 pordiga.LAN-kaabel tagab stabiilse traadiga internetiühenduse USB-C™ seadmetele, millel puudub oma võrguport.USB 3.1 abil saavutab kaabel SuperSpeed andmeedastuskiiruse kuni 5 Gbit/s.CAT 6 kaabel on tänu fooliumvarjestusele (FTP) tõhusalt kaitstud häirete eestUSB-kaabli punutud, vastupidavast tekstiilist ümbris on meeldiva tunnetusega ja säästab tundlikke pinduKvaliteetsed ja vastupidavad metallpistikud koos paindumiskaitsega tagavad eriti pika kasutusaja.USB-C™ pesa ühildub populaarsete kaubamärkide, nagu Lenovo, HP või Dell, sülearvutitega, samuti Windowsi, macOSi ja Androidiga ning enamiku Thunderbolt™ 3 seadmetega, nagu Apple MacBook või iPad.Pange tähele: internetikaabel ei sobi mängukonsoolide jaoks ümberpööratavaks kaabliks
Controller Form Factor: Plug-in kaart Requires Expansion pesa Standard1Provides Data Channel: SATA III Data Transfer Rate1M.2: 2 Package Type125 mm kõrgus (mm): 20 mm laius (mm)120 mm Nominal kaal: 0.045 kg garantii Products Returnable12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1kg Pack kaal Netto (kg): 0.06 kg Pieces in pack1Box kaal Brutto (kg): 0.1kg Retail Packaging Netokaal Carton: 0.055 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 4260455640671
Original part number A-HDMI-VGA-04 Product name Gembird adapter HDMI-A(M) ->VGA (F), on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type HDMI male Other information Other information Colour Black Additional information Output: 1 x VGA DB15 female without nuts, VESA up to WUXGA, 1920 x 1080 at 60 HzInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Cable : 15 cmChipset CH7101Dimensions: 45 x 15 mm x 200 mmNet weight: 36 g
Lihtne kinnitamine otse monitorile: Mi Computer Monitor Light Bar kinnitub otse monitorile ega võta töölaual kübetki ruumi. Asümmeetriline viimistletud disain: Valgusti disain on peensusteni läbimõeldud, nii et see ei tekita ekraanil peegeldusi ning tagab mugava töötamise ka pikkade töötundide vältel. Kõrge Ra95 värviedastusindeks: Valgusti värviedastusindeks küündib kuni Ra95, tagades loomutruud värvid ja detailid. Võbelusevaba tehnoloogia vähendab ka pinget silmadele. Vähem takistusi, rohkem vabadust: Koos lambiga on komplektis mugav juhtmevaba juhtpult, millega saab muuta valguse temperatuuri ja eredust. USB-C ühendus: Monitoriga ühenduses olles läheb valgusti automaatselt tööle, kui arvuti sisse lülitad. Valguse reguleerimine: 2700K - 6500K
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
Kasutage võrratut energiat ja pulseerivaid andmevooge, mis elektrifitseerivad kõigi kasutajate südameid: 240 W võimsusega ja 40 Gbit/s andmeedastuskiirusega ületab see kaabel hõlpsasti kõik varasemad USB-ühendused. Olgu tegemist siis suure jõudlusega sülearvutite, võimsate dokkimisjaamade, graafikakaartide või Thunderbolt™ 4 pordiga emaplaatidega - selle eksklusiivne jõudlus teeb USB4™-kaablist kõigi kaasaegsete võrkude elulõnga. Lisaboonusena tagavad kvaliteetsed metallpistikud eriti pika kasutusaja ja meeldiva tunde.240 W, mis on võimalik tänu Power Delivery'ile (EPR), muudavad USB-kaabli suure jõudlusega sülearvutite, dokkimisjaamade ja muude energiamahukate multimeediaseadmete peamiseks toiteallikaks.Kuni 40 Gbit/s tagavad välkkiire andmeedastuse - see teeb USB-C™ kaabli 8 korda kiiremaks kui USB 3.0 ning sobib ideaalselt NVMe kõvaketaste, HD-filmide, seriaalide, muusika ja fotode edastamiseksKaabel toetab ülikõrgeid lahutusvõimeid kuni 8K @ 60 Hz/4K @ 120 Hz ühe monitori puhul ja 4K @ 60 Hz, kui signaal on jaotatud kahe monitori vahel jaotuskeskuse kauduToetab HDR10 ja sobib ideaalselt HD-videote striimimiseks välistele monitoridele, teleritele või projektoritele, nt nutitelefonidest, sülearvutitest, tahvelarvutitest ja muudest vastuvõtvatest seadmetest.Seni kõige paindlikum USB-kaabel: Võimaldab andmetunneldamist DisplayPort™ 2.1 ja PCIe™ 4.0 kaudu ning seda saab ühendada otse Thunderbolt™ 4 või Thunderbolt 3™ pordiga.Toetab USB-C™ porte DisplayPort™ Alt Mode'iga kõrglahutusega videoülekannete jaoks ning ühildub tagurpidi USB 3.2, 3.1 ja 3.0 (USB-C™) andmetega.USB4™ ühildub tipptasemel mängukomponentidega, nt Razer Blade 18, Corsair Voyager, Apple Studio Display või AMD Ryzeni protsessorid (Zen 3+, Zen 5).
See Delocki korpus on väline lahendus erinevatele 9,5 või 12,7 mm kõrgusega Slot-in Slim SATA-ketastele, nt DVD-ROM, DVD±RW, Blu-ray jne. Seega muudetakse sisseehitatud ketas mobiilseks kettaks. Korpus ühendatakse arvutiga või sülearvutiga USB Type-A pistiku kaudu.Tehnilised üksikasjadÜhendused:välised:1 x USB 3.0 Type-A pesasisemine:1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesaKiibistik: Initio INIC-3639Kuni 12,7 mm kõrguste Slim SATA-ketaste jaoksToetab DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-rayHot Swap, Plug & PlayEi vaja välist toiteallikatKorpuse materjal: plastikVärv: mustKaabli pikkus: ca. 28 cmMõõtmed (LxSxK): ca. 143 x 139 x 16 mmSüsteeminõudedLinuxi tuum 2.6.38 või uuem versioonMac OS 10.9.5 või uuemWindows 7/7-64/8.1/8.1-64/10/10-64Arvuti või sülearvuti, millel on vaba USB A-tüüpi portPaketi sisuVäline korpusKasutusjuhend
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 8GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
8K @ 60 HzKaks on parem kui üks: teie teleril või monitoril on ainult üks HDMI™ sisend, kuid te kasutate regulaarselt oma mängukonsooli ja sülearvutit suurel ekraanil? HDMI™ lüliti abil saate ühendada teleriga korraga kaks allikat ja nupuvajutusega nende vahel vahetada. See vabastab teid pidevast kaablite vahetamisest ja kaitseb pistikupesu ja pordid.HDMI™ lüliti edastab signaale 2 sisendseadmest, nagu mängukonsoolid, sülearvutid või Blu-ray-mängijad, 1 väljundseadmesse, nagu teler, monitor või projektor.Kõrge resolutsioon: HDMI™ lüliti 2 sisendit ja 1 väljund toetab resolutsioone kuni 8K @ 60 Hz, 3D-sisu ja HDCP.2 sisendit, 1 ekraan: ühe nupuvajutusega peegeldatakse sisend 1 või sisend 2 väljundekraanile.HDMI™ pikendaja mugav lüliti välistab vajaduse kaableid uuesti ühendada ja kaitseb ühendusi.Vähem kaablisegadust Xboxi, PlayStationi ja teleri vahel: kahe pika kaabli ühendamise asemel ekraaniga piisab ühest pikast kaablist lüliti ja teleri vahel.HDMI™ lüliti 2x1 saab toidet integreeritud USB-C™ ühenduse kaudu (kaabel ei kuulu komplekti).Märkus: HDMI™ lüliti ei tööta splitterina!
This adapter by Delock enables the connection of an HDMI monitor, projector or TV to the device with a free DisplayPort interface. Due to the small dimensions, the adapter is ideal as on the go companion. Excellent picture quality The adapter supports a resolution up to 8K Ultra HD (7680 x 4320 @ 60 Hz), which is four times the resolution of 4K and is backward compatible to 4K Ultra HD and Full-HD 1080p. Thus, the Delock adapter can be used for applications such as photo and video editing, digital video walls and gaming. Supports HDR By the support of the HDR (High Dynamic Range) function, the screen can be displayed sharper, clearer and more vivid. Active adapter The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals. Specification • Connectors: 1 x DisplayPort male 1 x HDMI-A female 1 x USB Type-C™ female (optional for power supply) • Chipset: Realtek RTD2173 • DisplayPort 1.4 specification • Resolution: with DSC: 7680 x 4320 @ 60 Hz without DSC: 7680 x 4320 @ 30 Hz (depending on the system and the connected hardware) • Transmission of audio and video signals • Supports 3D displays • Supports HDR10 • Supports HDCP 1.4 and 2.2 • Plug & Play • Housing material: aluminium • Cable length without connectors: ca. 20 cm • Colour: black / grey System requirements • A free DisplayPort female port Package content • Adapter DisplayPort to HDMI
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Tootja: Natec Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.0 seadme suurus: 2.5 tolli seadme liidesed: SATA III toetatud seadmed: Hard disk, SSD toiteplokk: USB laius: 78 mm kõrgus: 12.3 mm sügavus: 130 mm
Original part number NKZ-0448 Product name Natec RHINO External USB 3.0 enclosure for 3.5" SATA HDDs, black aluminum Producer Natec Class of product USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station interface USB 3.0 Device size 3.5 inches Device interface SATA Supported devices Hard disk Supported operation systems Windows 2000/XP/Vista/7/8 Power supply AC Adapter Width 187 mm Height 31.5 mm Depth 117 mm Net weight 660 g Additional information aluminum case provides very good heat dissipation and drive protectionoption of setting case up horizontally or standing it verticallyhigh data transfer speed (up to 5 Gbps)suitable for most 3.5" SATA hard drivesUSB cable lenght: 60 cmpowered by AC Adapter (included)
CAT 6A võrgukaabel U/UTP, hall, LSZH halogeenivaba, CU Sobilik 10 Gigabit (10/100/1000/10000 Mbit) võrgule*. unshielded LAN/network cable to connect network components with 2 x RJ45 connectors Cat 6(A) tested with gold plated PINs with length indication on the slimline strain relief suitable for Power over Ethernet (PoE/PoE+) with latch protection
Original part number CV0060 Product name LOGILINK - VGA with Audio to HDMI Converter Producer LogiLink Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA male Plug 2 type HDMI female Other information Other information Colour Black More info Data sheet
Tootja: Unitek Tootegrupp: kaablid - HDMI | DP | Component | DVI | VGA kaabli tüüp: Audio-Video DisplayPort plugs: 1x male Displayport, 1x male Mini DisplayPort kaabli pikkus: 3 m kullatud pistikud: Jah kaabli värvus: must Netokaal: 0.117 kg Brutokaal: 0.126 kg Lisaandmed: Deliver high definition digital audio ja Video signaal, koos DP1.2 standard, tugi 4K resolutsioon, 4 times the resolutsioon of Full HD
This docking station by Delock can be connected to a MacBook with two adjacent Thunderbolt™ 3 ports, e.g. the MacBook Pro. Two monitors can be operated simultaneously at the HDMI output ports. Three built-in USB Type-A ports allows the use of peripherals. With a USB-C™ power supply, laptops such as the MacBook can be charged during operation. Advanced monitor setting The Delock docking station occupies two ports on the MacBook simultaneous; therefor it is possible to display different content on both HDMI ports at the same time. Further it allows multiple monitors to be combined into one large display. Thereby the docking station supports a maximum resolution of up to 4K per monitor. USB Power Delivery (USB PD 3.0) support up to 60 watt The docking station has a USB Type-C™ Power Delivery port to connect the power supply of the laptop or tablet to charge it. The docking station can also be used without a power supply. Small sturdy helper Due to its small dimensions and its sturdy housing, this Delock docking station is particularly suitable for travelling. It can simply be packed into the bag together with the laptop and used as needed. Note Only one additional external monitor can be connected to MacBook devices with M1 chipset. Specification • Connectors: 2 x USB Type-C™ male 2 x HDMI-A female 3 x SuperSpeed USB (USB 3.2 Gen 1) Type-A female 1 x USB Type-C™ female (power supply) • Resolution: Single + Dual: HDMI port 1 up to 3840 x 2160 @ 60 Hz HDMI port 2 up to 3840 x 2160 @ 30 Hz (depending on the system and the connected hardware) • Transmission of audio and video signals • USB Power Delivery (PD) 3.0 • Input power: 1 x USB Type-C™ female max. 60 W • Metal housing • Colour: grey • Dimensions (LxWxH): ca. 116.0 x 28.0 x 9.5 mm System requirements • MacBook Pro with two adjacent Thunderbolt™ 3 ports Package content • Docking station • User manual
