USB 2.0 printer cable, 1.5 m - Reliable connection - Perfect for connecting printers, scanners and other peripherals - Gold plated contacts Connectors USB type-A (male) / USB type-B (male) Colour Black
USB Type-C 3-in-1 multi-port adapter (Hub + HDMI + PD) - 3-in-1: 3-port USB hub, 4K HDMI and USB Type-C PD - Superspeed USB 3.1 Gen 1 (5 Gbps) data transfer via USB hub - Plug & Play Product Type USB Hub 2xHDMI, 3xUSB 3.1 1xUSB-C
With the Thunderbolt 3 protocol, PCI Express, DisplayPort and host-to-host transmissions can be implemented. With this cable, you can transmit audio/video signals, data, and also provide power. The data transfer rate is 5 Gbit/s. so you can transfer large files like movies and music in just a few seconds. Video signals are transmitted with up to 4K resolution and 60Hz refresh rate. Support for USB Power Delivery technology allows you to use the charging function. With the right charger, mobile devices can be quickly charged with a maximum power of 60 W (3 A / 20 V). The USB Type-C interface ensures broad compatibility with devices with this connector. Supports data transfer rates up to 5 Gbit/s Supports USB Power Delivery with 20V, 3A and 60W Backwards compatible with Thunderbolt 3 and USB 2.0 Support for transmitting DisplayPort audio/video signals over PCi Express Supports audio/video resolutions up to 4K @ 60 Hz Aluminum housing
Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
USB Type-C 5-in-1 multi-port adapter (Hub + HDMI + PD + LAN) - 5-in-1: 2-port USB hub, 4K HDMI, LAN port and USB Type-C PD charge support - Fast networking and Superspeed USB 3.1 data transfer via USB hub - Plug & Play
Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
15cm USB-C to DisplayPort 4K adapter USB Type C male to DisplayPort female adapter cable For connecting a DisplayPort display to a USB Type-C video source (e.g. smartphone or laptop) Works on any device that supports DisplayPort Alternate Mode (Alt Mode) Supports 4K UHD resolutions at 60 Hz
Acer HP.DSCAB.013. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Kõrvaklappide ühenduvus: 3,5 mm. Toote värv: Süsinik, Hõbe, HD tüüp: 8K Ultra HD, Maksimaalne digitaalresolutsioon: 7680 x ...
HDMI M/M V2.1 CABLE 100M 8K BLACK OPTICAL AOC LANBERG HDMI optical cables allow for lossless transmission of audio-video signals over vast distances. Thanks to the use of optical fibre as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows the transmission of 8K quality video at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, the resolution can be increased up to a maximum of 10K! NOTE Due to its design, an optical HDMI cable only transmits video in one direction. Please pay attention to the markings on the connectors in order to connect the product correctly.
FPMA-D550SBLACK Neomounts by Newstar monitor desk stand Neomounts by Newstar FPMA-D550SBLACK full motion desk stand for 10-32" monitor screen, height adjustable - Black
Connect your USB-C device to the Ethernet with this easy-to-carry, Plug-and-Play Ethernet adapter. Get the fast Internet speed of a wired Ethernet connection for fast and reliable streaming and downloads.
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 5 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The Neomounts by Newstar DS70-450WH1 is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450WH1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
The Neomounts DS60-425BL2 NEXT Lite is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screens. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screens to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425BL2 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
The Savio AK-67 M.2 SSD NVMe external drive enclosure is a state-of-the-art solution that will allow you to store and transfer data in an extremely fast and secure way. Incredible capacity With a maximum installed capacity of 4TB, you can store large amounts of data and files without having to clear space frequently. High data transfer speeds allow you to transfer large files and information in no time. High compatibility The enclosure supports a variety of M.2 drive types, including M.2 2230, M.2 2242, M.2 2260 and M.2 2280, giving you the flexibility to choose the right media. Compatibility with various operating systems, such as Windows XP/Vista/7/8/10/11, macOS and Linux, makes the chassis user-friendly for all users. Sleek design The case measures 104.5 × 39.5 × 12 mm, making it compact and easy to carry. Its light weight of 44 g makes it the ideal companion for travel or work, providing mobility and convenience. Technical specification: Interface: USB 3.0 Maximum bandwidth: 10 Gbps Maximum capacity of the installed disk: 4 TB Connector: USB 3.1 Gen 2 Dimensions: 104.5 × 39.5 × 12 mm Weight: 44 g Colour: grey Supported drives: M.2 2230, M.2 2242, M.2 2260, M.2 2280 Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
Desk mounted adjustable monitor arm for 2 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 2 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 2 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 32") Durable adjustable gas-springs suitable for monitors of 2 - 8 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
Adjustable desk holder with monitor arm and notebook stand. The monitor holder with a notebook shelf is mounted on the desk. Position your screen perfectly to reduce neck and eye strain. Thanks to the holder, you will save space on your desk. The arms swivel, extend and retract, and tilt to change the reading angle. Allows displays to be rotated from landscape to portrait mode, etc. Allows easy, ergonomic positioning to reduce workload. Works with almost any LCD monitor (max. 27") and supports notebooks up to 17.3" VESA compatibility: 75 x 75, 100 x 100 mm Strong desk clamp or grommet for easy and secure attachment to your desk Built-in cable management for an organized and tidy workspace Surface finish: powder coating Fit Screen Size: 17"~32" Load capacity: 8 kg (per arm) Tilt range: +90° ~ -30° Rotation range: +90° ~ -90° Screen rotation: +180° ~ -180° Installation: Desk clamp or grommet Max. Desk Thickness: Clamp: 10 ~ 80mm, Grommet: 10 ~ 40mm Cable Management: Yes
The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
USB-A adapter AK-68, is a cable that features great quality and reliability. It will come in handy when you want to copy data from a drive and transfer it to another device, or when you want to back up your files. Thanks to the Plug&Play function, the electronic accessory does not require the installation of additional drivers. The adapter is characterized by its versatility, as it is compatible with operating systems such as Windows, MacOs and Linux. Compatibility The AK-68 has the advantage of backward compatibility, which is that it can support older, lower-speed devices using previous USB standards. These include USB 2.0 and USB 1.1, among others. Importantly, the same adapter provides support for the latest USB 3.0 and newer compatible equipment. Versatility USB-A is one of the most common connector types in consumer electronics. It is used in a wide range of devices, from personal computers and laptops to camcorders, game consoles and printers. Thanks to its Plug&Play feature, you don't need to install any additional driver to take full advantage of the adapter. Technical specifications: Data transmission: SATA III up to 5 Gbps and SATA II up to 3 Gbps Hard drive support: up to 10 TB Supported drives: 2.5" Cable length: 25 cm Plug and Play: Yes, no additional drivers required Dimensions: 45 × 42 × 11.5 mm Weight: 21 g
The Neomounts by Newstar FPMA-D550DD3BLACK is a full motion desk stand for three flat screens up to 27" with a maximum weight capacity of 7 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Additionally, the mount features height adjustment (0-43,2 cm), to create the perfect work situation. The smart cable management clips ensure orderly routing of the cables. Additionally, the mount features an Easy-release VESA, that allows you to (de)attach the monitors in a wink of an eye. The FPMA-D550DD3BLACK is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Deviant hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The DIGITUS USB extension cable DA-73111 offers reliable connectivity for your devices. With compliance to USB 3.0 and USB 3.1 standards, this cable ensures fast data transfer speeds of up to 5 Gbps. Its double shielded design helps protect against interference, ensuring a stable connection.Equipped with a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable is versatile and compatible with a wide range of devices. Whether extending the reach of your peripherals or setting up your workstation, the DIGITUS USB extension cable provides dependable performance and connectivity.
The Neomounts by Newstar AV1-825BL is a videobar & multimedia kit optional for the FL50S-825BL1 mobile floor stand. The kit enables the installation of a separate cam shelf and multimedia device shelf to the trolley. The universal cam shelf can be installed both above and below the screen and is adjustable in height and depth, to fit the screen. Additionally, the cam shelf can be mounted both on the front and back of the mount. Included to the kit is an adapter for the Bose VB1 and VB-S (also both placeable above and below the screen).
The Neomounts WL90-325BL1 is a full motion height adjustable wall mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The wall mounted workstation has a large height adjustment range of 44-95 cm. To ensure quick repositioning and the most optimal working position, the WL90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures a secure routing of the cables. The WL90-325BL1 is suitable for screens that are compatible with VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.
With the LogiLink multifunction cart, you can easily mount your TV monitor without drilling holes in the wall. The BP0163 is a classy and perfect solution for office presentations. With the four lockable heavy-duty castors, the display cart allows you to place your TV in the room comfortably and easy. You can also tilt the monitor without any tools or adjust the height with an effortless spring lock.
