• 2D IMAGE Barcode Scanner Image Sensor: 1MP (1280 x 800) • High-Resolution Imaging: Captures sharp and detailed images for accurate decoding. • Precise scanning of 1D & 2D barcodes, ( barcodes & QR code ) • Efficiently deciphers linear barcodes for retail and inventory management. • Durable Construction: Robust design to withstand daily use and potential drops. • Protected and water-resistant (IP54) • Wide Scan Range: Reads barcodes from various distances and angles. • Multiple Scanning Modes: Options for continuous, single, or presentation mode scanning. • Plug-and-play functionality for quick setup • Omnidirectional Scanning: Reads barcodes from any angle, reducing the need for precise alignment.
Extender over Cat6 HDMI 4K/60Hz via IP 1G or up to 120m/200m with PoE, max. 253 receivers, IR control - Set This device enables HDMI AV signal transmission in UHD resolution (4K/60Hz) over distances up to 200 m in a point-to-point connection using a CAT6 network cable (or higher). With PoE support, no external power supply is required. The HDMI IP Extender Set 4K/60Hz allows HDMI AV signals to be transmitted in ultra-high 4K resolution (4096x2160p at 60Hz) over long distances of up to 200 meters-thanks to an efficient point-to-point connection using a CAT6 or higher network cable. The set is fully powered via a PoE network switch; no external power adapters are needed. IP expansion allows flexible system scaling and supports up to 253 receivers (displays) for point-to-multipoint transmission. Additionally, the existing 1G network infrastructure can be used, allowing unlimited signal range by cascading through network switches. For even greater flexibility, additional receivers (RX) are available separately (model: DS-55354). Outstanding image quality is always maintained: with low latency of only 150220 ms, the transmission is smooth and razor-sharp in UHD. Another practical feature is the integrated IR interface, which enables remote control of the input source directly from the output display. The device is also suitable for wall mounting, saving space. Ideal for professional AV applications, home theater setups, or corporate use, this HDMI IP extender set combines top-quality transmission with maximum flexibility. Key Features: Long-range transmission: AV signal transmission via CAT6 (or higher) cable up to 200 m - point-to-point connection IP expansion capability: Supports up to 253 receivers (displays) - point-to-multipoint connection Flexible and efficient via IP: Uses existing 1G network infrastructure or additional 1G network switches to transmit signals over unlimited distances - cascading Expandable options: Additional receivers (RX) available separately (model: DS-55354) Flexible installation with PoE: Fully powered via PoE network switch - no external power supply required Exceptional image quality: UHD transmission up to 4K/60Hz (4096x2160p) with low latency of 150-220 ms IR interface: Allows remote control of the input source from the output display Supports CAT6 or higher network cables Wall-mountable design
HDMI 4K/60Hz Fiber Optic Extender over IP 1G or up to 40 km/300 m, HDMI Loop-Out, IR Control - Kit This kit enables UHD HDMI signal transmission (4K/60Hz) over distances of up to 40 km (single-mode) / 300 m (multi-mode) in a point-to-point configuration. The HDMI Fiber IP Extender 4K/60Hz is the perfect solution for transmitting high-quality HDMI signals over long distances. It supports UHD 4K/60Hz (3840x2160p) video with minimal latency of just 80-140 ms, delivering razor-sharp images with virtually no delay. Using modern fiber optic technology, the system achieves a maximum transmission distance of up to 40 km in single-mode or 300 m in multi-mode, making it ideal for professional AV installations. By leveraging existing 1G network infrastructure or additional 1G network switches, the extender kit allows flexible and efficient signal transmission. Range can also be extended further through cascading, enabling virtually unlimited distances. For additional flexibility, the system supports LC and SC SFP modules as well as single-mode and multi-mode fiber cables. Compatible SFP modules are sold separately (Single-mode: DN-81002, Multi-mode: DN-81000). In addition to excellent video quality, the kit provides a separate audio output via a 3.5 mm stereo jack for flexible audio transmission. HDMI Loop-Out allows a local monitor to be connected directly to the transmitter (TX), while the integrated IR interface enables remote control of the input source from the output display. With its long range, high-quality video, and versatile expansion options, the HDMI Fiber IP Extender Kit is ideal for conference rooms, control centers, digital signage, and broadcast studios. Key Features: Long-range transmission: AV signal over fiber - Single-mode up to 40 km, Multi-mode up to 300 m (point-to-point) Flexible and efficient over IP: Utilize existing 1G network infrastructure or 1G switches for virtually unlimited distance - supports cascading SFP modules sold separately: LC Single-mode (SM): DN-81002, LC Multi-mode (MM): DN-81000 Wide compatibility: Supports LC and SC SFP modules, as well as single-mode and multi-mode fiber cables Exceptional image quality: UHD 4K/60Hz (3840x2160p) transmission with low latency of 80140 ms Additional audio output: 3.5 mm stereo jack for separate audio transmission HDMI Loop-Out: Connect a local monitor to the transmitter (TX) IR interface: Remote control of the input source from the output display
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
CSV-1009 DisplayPort™ 2-in-1 Bi-directional Switch 8K The Club 3D® CSV-1009 is a versatile DisplayPort™ switch that allows you to switch between two sources on one screen or route one source to either of two screens at 8K resolution. DisplayPort™ 2-in-1 Bi-directional Switch for 8K; it can switch either of two sources to one display or switch one source to either of two displays. Supports the DP1.4 specification. Video resolution up to 7680x4320P at 60Hz. Supports HDR, DSC, and HDCP pass-through. The toggle button lets you quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides show which port is selected for operation. The longer/thinner the cable, the greater the risk of signal instability. To ensure maximum performance, use our Club 3D® cables. Power can be drawn through the DP male port from the connected device. If some devices are not compatible with power supplied via the DP male port, power can instead be supplied to the switch via the Type-C® female port.
• VESA compliant: Supports mounting patterns up to 100 × 100. • Strong load capacity: Holds monitors up to 8 kg. • Height adjustment: Move the screen to an ergonomic viewing level. • Tilt adjustment: Fine-tune the angle for comfortable viewing. • Cable management: Keeps wires organized and out of sight. • Free-standing design: Sits securely on any desk with no clamping or drilling. • Keyhole Pattern: allows for easy installation
With its slim and ergonomic design, the ICY BOX IB-MS524-T dual monitor swivel arm minimizes the space required by the monitors and promotes a more flexible and productive workplace. The Smart Torque Adjust function allows easy adjustments to different monitor weights, and the high-quality gas strut ensures smooth height adjustment. The integrated Easy Cable Management guides the cables under the arm and avoids clutter. The thoughtful design minimizes tripping hazards and improves the aesthetics of the workplace. The IB-MS524-T monitor arm features a versatile metal desk mount that can be mounted as a clamp mount or desk grommet and is suitable for most desks thanks to the adjustable clamp height. By the way, you don't have to crawl under the desk if you want to use the clamp holder, because it is attached from the top of the table. The removable VESA plates made of high-quality steel can be lifted out after a simple unlocking, so that they can first be attached to the monitor and then easily hooked back into the support arm. They support the 75 x 75mm and 100 x 100mm VESA standard. Made from a robust combination of steel, plastic and high-quality aluminum, the IB-MS524-T monitor mount securely supports two monitors up to 32" and 9 kg in weight. Monitor mount type Color gray EAN 4250078174189 Manufacturer no. 61085 Made in China For holding/attaching monitors To hold/attach to/on tables Fastening type screw fastening, clamping device Table top thickness 10 - 50 mm Max. dimensions screen size 43 - 81 cm (17 - 32 ") Material steel / aluminum VESA standards 75 x 75 mm, 100 x 100 mm Ergonomics Tilts from +90° to -45° Ergonomics Rotatable ± 90° Ergonomics Can be swiveled ± 180° Ergonomics Height adjustable from 215 mm - 495 mm Holder for 2 devices Load capacity 18 kg (2 x 9 kg) Feature High quality gas strut, removable VESA plates made of high quality steel Other functions Integrated cable management Further information Maximum arm extension 550mm Accessories available Allen key, screw set, quick assembly instructions
• Portable floor stand Maximum weight capacity: 100 kg Grey • Maximum screen size: 2.18 m (86") • Mounting type: Floor • Minimum VESA mount: 200 x 100 mm Maximum VESA mount: 800 x 600 mm • Wheels Cable management
CCF-USB2-AM5P-6 Premium quality USB 2.0 A-plug MINI 5PM 6ft cable with ferrite core USB 2.0 cable A plug/mini-USB 5PM 6ft cable 30u" gold-plated contacts suitable for USB 2.0 high-speed data transfer Ferrite core filter
USB extension cable, 15 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number UAE-30M Product name Gembird USB 2.0 active extension cable AM-LAN-AF, max. 98ft Producer Gembird Class of product Cables - USB plugs 1x male USB A-type1x female USB A-type Cable length no data Other information Other information Gold plated plugs No Cable colour Black Net weight 25 g25 g Additional information Extension set uses LAN cables to extend your USB cableExtend your USB cable up to 30 metersWorks with CAT6 or CAT5E LAN cablesconnectors: 1x USB AM, 1x USB AF, 2x RJ45Adapter cable length: 17 cmUSB 1.1 interface (USB 2.0 compatible)
Original part number CCP-USB3-AMBM-6 Gembird USB 3.0 A- B 1,8m cable Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type2x USB 3.0 Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue More info Strona producenta [EN]
Original part number 2L-5203UP Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 3m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 3 m
Key Featuress:- Flexible switching for an uninterrupted multi-platforms experience.- Control and manage four computers using a single USB keyboard and mouse and monitor.- Simultaneous and independent PC user-programmable switching.- High 2048 x 1536 pixels VGA resolution.- USB interface power supply.- Easy switching between computers with keyboard hotkeys push button and software selection.- At-a-glance LED display for easy monitoring of PC activity.- True Plug-and-Play operation without any software installation or power supply.- Windows-based switching software utility included.DesignNumber of Hosts 4Supported Maximum Resolution 2045 x 1536 pixelsDevice Switchoveron the Deviceper KeyboardCabel SetsQuantity 4Length 1.8 mLEDPort 4Terminal-Device ConnectionsUSB 2VGA 1Connections per ComputerUSB 1VGA 1Scan Intervals Auto-Scanning
Original part number 62599 Product name Delock Adapter Displayport 1.2 male > DVI female 4K Active black Producer Delock Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Audio-Video DisplayPort plugs 1x male DisplayPort DVI plugs 1x female DVI-I (Dual Link) /24+5/ Cable length 0.2 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Resolution up to 3840 x 2160 @ 30 Hz (depending on the monitor and your system)Supports HDCP 1.3Supports EyefinityDVI-D (Single Link) 24+5 port with screw nuts (VGA not wired)
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Plugs with new design- Boots with kink protections and strain reliefs- Spot length on boot- Material: CuKaabli pikkus3 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Kaabli kateS/FTP (S-STP)Toote värvPunaneSuguMale/MalePistmikukontaktide kateVaskMantli materjalMadala suitsu null halogeen (LSZH)AWG-juhtme läbimõõt26Kasutamistemperatuur (T-T)-20 - 60 °C
This compact adapter from LogiLink allows the operation of serial (COM port also called RS232 interfaces) devices to the USB 2.0 port. Ideal for operating serial end devices such as modems or ISDN adapters and older hardware to newer generations of notebooks and PCs that have no serial port. A 80cm USB extension cable is included.- Chipset: FTDI FT232RL- Connector 1: USB A male- Connector 2: RS232 (9-pin) male- Fixing with thumbscrews- According to USB 2.0 standard- incl. USB extension cable- and protection caps- With Windows 8 supportPistmik 1USBPistmik 2RS232SuguSisestatav konnektorÜhilduvad operatsioonisüsteemidWindows 98SE/ME/2000/2003/ 2008/XP/Vista/7/8Pakendi laius100 mmPakendi sügavus212 mmPakendi kõrgus30 mmPakendi kaal130 gKaablid kaasa arvatudUSB
STARTECH USB31000S USB 3.0 to Gigabit Ethernet NIC Network Adapter Product Description StarTech.com USB 3.0 to Gigabit Ethernet NIC Network Adapter - network adapter Device Type Network adapter Form Factor External Interface (Bus) Type SuperSpeed USB 3.0 Ports Gigabit Ethernet Dimensions (WxDxH) 2.6 cm 1.55 cm Length 67 cm Weight 27 g Cabling Type Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Link Protocol 10Mb LAN, 100Mb LAN, GigE Processor AX88179 - ASIX Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.1Q, IEEE 802.3ab Colour Black System Requirements Microsoft Windows Server 2008 R2, Apple MacOS X 10.6, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Apple MacOS X 10.7 Lion, Apple OS X 10.8 Mountain Lion, Windows 8 (32/64 bits), Windows 10 (32/64 bits) Manufacturer Warranty 2 years warranty
