Original part number CC-HDMI-DVI-10 Product name Gembird HDMI to DVI male-male cable with gold-plated connectors, 3m, bulk pack Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Video HDMI plugs 1x male HDMI A-type (19-pin, Single Link) DVI plugs 1x male DVI-D (Single Link) /18+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Neid Delocki kaablimärgistuse klambreid saab kasutada erinevate kaablite märgistamiseks ja eristamiseks. Neid saab hõlpsasti kinnitada mis tahes kaablile, mille läbimõõt on kuni 6 mm.SpetsifikatsioonKogus: 260 tükki polü koti kohta10 x 26 kaablimärgistuse klambrit tähtedega A-ZMaterjal: PVCKuni 6 mm läbimõõduga kaablileVärv: kollanePakendi sisu260 x kaablimärgistuse klambrit
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
240W POWER DELIVERY 3.1: UGREEN USB C cable supports up to 240W of power delivery, suitable for the latest high-power charging needs, such as laptops, capable of charging a MacBook Air M3 13" to 88% in 35 minutes. Backward compatible with 140W/100W/87W/65W/45W/30W/20W USB-C charger UNIVERSAL COMPATIBILITY: The USB C to UBS C charger cable is designed to work with a wide range of USB-C devices, including smartphones such as iPhone 15/15 Pro/15 Plus/15 ProMax, Galaxy S24/S23/S22/z fold 5/A35, Pixel 8/7, Moto G Play; laptops such as MacBook Pro 2023/Air, Dell XPS, Surface Laptop 13.5"; tablets such as iPad Air/Pro, Galaxy Tab S9, Surface Pro 9; and various USB-C devices such as Steam Deck ULTRA-DURABLE DESIGN: Engineered with premium nylon braiding and robust aluminum housing, this 240W type c cable is built to withstand over 30,000 bending cycles. The reinforced structure of this 240W usb-c charge cable resists tangles, frays, and everyday wear, making longevity and reliability SUPERIOR E-MARKER CHIP TECHNOLOGY: Equipped with an advanced E-marker chip, this USB C to USB C cable fast charging provides safe and efficient power transmission. It intelligently negotiates power output to match your device's needs, max up to 240W, enhancing compatibility and safety 480MBPS DATA SYNC: Transfer files, photos, and videos at breakneck speeds of up to 480Mbps. This USB-C to USB-C cable makes smooth data syncing between devices without compromising transfer quality or speed, perfect for daily using. [Note: Video output to monitor is not supported]*Function: Charging & Data Sync *USB 2.0 speed up to 480Mbps *Charging Power: 240W (Max) *Wire core: tin-plated oxygen free copper *Multiple internal shielding *Can not transmit audio and video *Aluminum case with braid
BenQ ScreenBar Pro on nutikas monitorivalgusti, mis pakub optimaalselt reguleeritud valgustust, vähendades silmade väsimust ja parandades tööefektiivsust. Selle kompaktne ja stiilne disain sobib ideaalselt igale töölauale, tagades ühtlase valgustuse ilma ekraani peegeldusteta. • Automaatne heleduse ja värvitemperatuuri reguleerimine • Lihtne paigaldus monitori ülaosale • Vähendab silmade väsimust • Kompaktne ja ruumisäästlik disain • Ei tekita ekraanil peegeldusi
Peripheral Type: Kaardilugeja Flash Types toetatud1Requires operatsioonisüsteem: Linux 2.6.0 või uuem Microsoft Windows 8 Microsoft Windows 8.10 or Later Maksimum Operating Ambient Temperature: 60 °C Minimum Operating Ambient Temperature1.7999 mm Nominal kaal: 10.9996 g Warranty Products Returnable: Jah garantii Term (month)16 mm Pack laius (mm): 1.6 mm Pack kõrgus (mm): 14.3 mm Pack kaal Brutto (kg): 0.0199 kg Pieces in pack: 1Box pikkus (mm): 222.25 mm Box laius (mm)1.92 mm Box kõrgus (mm): 16.84 mm Box kaal Brutto (kg): 0.5924 kg Retail Packaging Netokaal Carton1
Arvutiga töötades tagab õige tool ja õige laud võimalikult ergonoomilise positsiooni. Sama oluline on tegelikult ka monitorijalg, mis võimaldab ekraani tõsta täpselt õigele kõrgusele. See aitab vältida võimalikke kaela- ja seljavalusid. Sobib ekraanidele vahemikus 17 "-32"
xTool SafetyPro™ AP2 Smoke AbsorberThe xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.Powerful, three-stage filtrationThe xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.Quiet operation for complete focusWith low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.Sealed design and easy operationThe AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.Mobility and compatibilityThe xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.Create in a healthy environmentWith the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.IncludedP5010391 x1Filter set x1Pipe clamp x3Smoke exhaust pipe x1Screw set x1Power cable x1Pipe connector x2Wall connector x1Screwdrivers (Phillips and flathead) x2User manual x1 ManufacturerxToolModelP5010391Adapted machineP2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1Product size290*491*542mmProduct weight20.7 kgControl modeTouch button, four adjustable gearsPre-filtration systemCyclone separationRated power220WFilter layersSuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filterNoise55dB
Original part number PP12-1.5M/R Product name Gembird patchcord RJ45, cat.5e, UTP, 1.5m, red Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 1.5 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Boot non-snag-proof Colour Red
See Delocki korpus on väline lahendus erinevatele 9,5 või 12,7 mm kõrgusega Slot-in Slim SATA-ketastele, nt DVD-ROM, DVD±RW, Blu-ray jne. Seega muudetakse sisseehitatud ketas mobiilseks kettaks. Korpus ühendatakse arvutiga või sülearvutiga USB Type-A pistiku kaudu.Tehnilised üksikasjadÜhendused:välised:1 x USB 3.0 Type-A pesasisemine:1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesaKiibistik: Initio INIC-3639Kuni 12,7 mm kõrguste Slim SATA-ketaste jaoksToetab DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-rayHot Swap, Plug & PlayEi vaja välist toiteallikatKorpuse materjal: plastikVärv: mustKaabli pikkus: ca. 28 cmMõõtmed (LxSxK): ca. 143 x 139 x 16 mmSüsteeminõudedLinuxi tuum 2.6.38 või uuem versioonMac OS 10.9.5 või uuemWindows 7/7-64/8.1/8.1-64/10/10-64Arvuti või sülearvuti, millel on vaba USB A-tüüpi portPaketi sisuVäline korpusKasutusjuhend
Schuko võrgupistik Clover Leaf IEC C5 pistikupessa Kaabli materjal: H05 VV-F 3G 1,00 100% elektriline ja mehaaniline kontroll VDE poolt heaks kiidetud Värvus: must Täielikult vormitud 10 aastane garantii LINDY toitekaablid sobivad suurepäraselt kasutamiseks professionaalsetes ruumides (salvestusstuudiod, valgussüsteemid ja ka igasuguste ürituste toimumispaigad jne) – aga võid kasutada ka privaatsetes osades.
The USB-C to 3.5mm audio adapter connects your headphones, speakers, and other audio devices to USB-C smartphones, laptops, tablets, and car audio systems, delivering crystal-clear, rich HiFi sound quality. With its wide compatibility, this adapter is ideal for everyday use, allowing for seamless audio connections with a variety of devices. With a built-in microphone and remote control, you can conveniently take calls and control music. The braided textile cable ensures durability and flexibility, while the 130mm length makes the adapter compactly portable.
USB-C 3.1 ja RJ45 Ethernet kaabelühendab ruuteri, modemi või võrgukommutaatori sülearvuti, tahvelarvuti või nutitelefoni USB-C™ porti.Tehnoloogiauuendus, mis lihtsustab teie elu: uuenduslik adapterkaabel on kompaktne Ethernet-lahendus kõikidele USB-C™-seadmetele, millel puudub oma RJ45-port. USB-pistikusse sisseehitatud nutikas nutikiip asendab varem vajaliku, keerulise RJ45-USB-C™-adapteri. Kaabli abil on Ethernet kohe saadaval ilma täiendavate draiveriteta. Lisaboonus: USB 3.1 kaabel ühildub Apple'i Thunderbolt™ 3 pordiga.LAN-kaabel tagab stabiilse traadiga internetiühenduse USB-C™ seadmetele, millel puudub oma võrguport.USB 3.1 abil saavutab kaabel SuperSpeed andmeedastuskiiruse kuni 5 Gbit/s.CAT 6 kaabel on tänu fooliumvarjestusele (FTP) tõhusalt kaitstud häirete eestUSB-kaabli punutud, vastupidavast tekstiilist ümbris on meeldiva tunnetusega ja säästab tundlikke pinduKvaliteetsed ja vastupidavad metallpistikud koos paindumiskaitsega tagavad eriti pika kasutusaja.USB-C™ pesa ühildub populaarsete kaubamärkide, nagu Lenovo, HP või Dell, sülearvutitega, samuti Windowsi, macOSi ja Androidiga ning enamiku Thunderbolt™ 3 seadmetega, nagu Apple MacBook või iPad.Pange tähele: internetikaabel ei sobi mängukonsoolide jaoks ümberpööratavaks kaabliks
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
Product kirjeldus: D-Link DUB H7 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x USB 2.0 Compliant Standards: USB 1.1, USB 2.0 mõõtmed (WxDxH): 6.3 cm x 10.4 cm x 2.9 cm System Requirements: Apple MacOS 8.6, Apple MacOS X 10.1, Microsoft Windows 98SE/2000/ME/XP Localisation: Continental Europe Manufacturer Warranty: 2-year garantii
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 4GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
The official CORSAIR premium individually sleeved 600 W PCIe 5.0/Gen 5 12VHPWR PSU cable delivers power from your CORSAIR Type-4 PSU to the advanced PCIe 5.0 graphics cards.
Original part number A-HDMI-VGA-04 Product name Gembird adapter HDMI-A(M) ->VGA (F), on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type HDMI male Other information Other information Colour Black Additional information Output: 1 x VGA DB15 female without nuts, VESA up to WUXGA, 1920 x 1080 at 60 HzInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Cable : 15 cmChipset CH7101Dimensions: 45 x 15 mm x 200 mmNet weight: 36 g
