Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
4-port USB 3.1 (Gen 1) Type-C hub YOUR GATEWAY TO USB WORLD USB 3.1 ultra-high data transfer speed up to 5 Gbps Powered hub: perfect for peripherals that need more power Suitable for USB Type-C OTG devices and PC Windows 11 compatible
Laadib korraga kuni 6 tahvelarvutit, nutitelefoni ja/või sülearvutit või MacbookiKuni 6 tahvelarvuti, nutitelefoni ja/või sülearvuti või Macbooki samaaegne laadimine kuni 140 W või muude USB-seadmete laadimine.Max. 5V 2,4A laadimine ühe USB A-tüüpi pordi kohta, max. 30W või 140W laadimine USB Type C pordi kohtaToetab USB Power Delivery: 2x PD 3.0 kuni 30W kumbki ja 1x PD 3.1 kuni 140WAku laadimisstandard 1.2 toetab kiirlaadimist, Apple'i laadimisprotokolli, QC 3.0/4.0 ja Samsung AFC toetabLindy 160W 6-pordiline USB-laadimisjaam võimaldab laadida kuni 3 USB-seadet A-tüüpi ja 3 C-tüüpi kaudu, nagu tahvelarvutid, nutitelefonid või sülearvuti või Macbook. Iga USB A-tüüpi port võib pakkuda kuni 5 V 2,4 A, kaks USB C-tüüpi porti võivad pakkuda kuni 30 W kumbki ja üks isegi kuni 140 W, et rahuldada kõige energiamahukamaid seadmeid. Kui kõik 6 porti on hõivatud ja/või kui koguvõimsus on suurem kui 160W, toimub koormuse tasakaalustamine.Tänu nutikale laadimisfunktsioonile ja paljude erinevate protokollide, nagu QC 3.0 ja 4.0 (ainult C-tüüpi porte), Samsung AFC ja Apple 5V 2,4A laadimisprotokolli ning BC 1.2 (ainult A-tüüpi porte) toetusele suudab see USB-laadimisjaam tuvastada ühendatud seadme, et reguleerida automaatselt laadimisvoolu kiire ja turvalise laadimise jaoks.USB Power Delivery Revision 3.1 võimaldab suuremat võimsust kuni 140 W rakendustele, sealhulgas suurematele sülearvutitele, mänguriarvutitele, Macbookidele, tööjaamadele või dokkimisjaamadele. Veel 2 Type C PD 3.0 porti, millest igaüks kuni 30 W võimaldab nutitelefonide ja tahvelarvutite kiiret, paindlikku ja turvalist laadimist.See USB-laadimisjaam pakub ka ülevoolu-, ülepinge- ja lühisekaitseid, et vältida seadme kahjustamist liigse voolu poolt.Plastikust vaheseinad saab kokku panna ja seadme ülaosas seista, mis võimaldab erineva laiusega seadmeid eri suurusega tahvelarvutite või mobiiltelefonide jaoks. See toode sobib ideaalselt kasutamiseks koolides, raamatukogudes, hotellides, restoranides või mis tahes kohas, kus kasutatakse mitut seadet. Laadimisjaama sujuvaks kasutamiseks on kaasas riigispetsiifilised toitekaablid, mis on ideaalsed ülemaailmsete ürituste või välismaal asuvatesse rajatistesse integreerimise jaoks.
The Neomounts by Newstar DS70-810BL2 is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of your screens. Additionally, the mount features gas spring height adjustment (26,5-55 cm) and depth adjustment (0-49 cm), to create the perfect working position. Additionally, the DS70-810BL2 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact. The smart cable management clips ensure orderly routing of the cables. The DS70-810BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Unused hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates. The DS70-810BL2 is equipped with an Quick-release VESA system for easy installation and comes with both desk clamp and grommet.
Desk mounted adjustable mounting arm for 3 monitors (full-motion) Position your screen perfectly Lightweight and tilting design Adjustable monitor desk mount for 3 monitors Two arms rotate, extend and retract, tilt to change reading angles, and allow to rotate displays from landscape-to-portrait mode, etc Central mount allows height adjustment, swivel, tilt and rotation Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27" ) Durable adjustable gas-springs suitable for monitors of 1 - 7 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The Neomounts DS75-450BL2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450BL2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
9 in 1 USB-C Hub: UH9120C turns a single USB-C port into 9 ports with a 4K@60Hz HDMI, 1 Gbps ethernet, SD & microSD UHS-I, 100W Power Delivery, 1× USB-C Data Ports, 3× USB-A Data Ports. Ultra High-Definition Media Display: Connect to an external monitor via the 4K@60Hz HDMI port for a stunning ultra high-definition experience. Stable Gigabit Connection: This compact gadget provides stable Gigabit Ethernet connectivity for your ultrabook, Chromebook, laptop, or desktop. SD & microSD UHS-I: Easily transfer data in SD and microSD cards (up to 104 MB/s). Experience seamless data management with simultaneous read/write capabilities on both microSD and SD cards. Powerful 100W Fast Charging: Plug the charging cable into UH9120C and continuously deliver up to 100W of power to your PC while transferring files or streaming media. 5 Gbps SuperSpeed Data Transfer: UH9120C adds multiple USB 3.0 ports to your device, enabling simultaneous use of multiple USB devices. Easy to Use with Plug & Play: Simply plug in and start using in seconds, thanks to driver-free install with Mac OS X El Capitan Version 10.11.6 and later, Windows 11/10/8.1, Linux OS, iPad OS, iOS, Android, Chrome OS, and Nintendo OS.
Neomounts CL35-440BL16L. Maksimaalne kaal (mahutavus): 50 kg, Ekraani minimaalne suurus: 94 cm (37"), Ekraani maksimaalne suurus: 177,8 cm (70"), Paigaldussüsteemi ühilduvus (min): 150 x 200 mm, Paigaldussüsteemi ...
The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.
The Mijia Tool Kit is a compact and versatile tool set for home maintenance and DIY projects. The set includes an electric screwdriver, hammer, wrench, pliers, measuring tape and multiple bits – all conveniently stored in one carrying case. Suitable for everyday repairs and smaller projects.
Logi Bolt USB-C vastuvõtja pakub turvalist ja suure jõudlusega juhtmevaba ühendust sinu Logi Boltiga ühilduva hiire, klaviatuuri või komplekti ning arvuti vahel. See sobib varuvastuvõtjaks või mitme arvuti kasutamisel ning võimaldab ühendada kuni kuus Logi Bolt seadet ühe vastuvõtjaga. Usaldusväärne ühendus töötab kuni 10 meetri kauguselt ka häiritud juhtmevabas keskkonnas ning seadmete sidumine on lihtne Logitech Options+ äpi kaudu. • Turvaline ja töökindel Logi Bolt juhtmevaba ühendus • Juhtmevaba tööulatus kuni 10 m • Ühenda kuni 6 Logi Bolt hiirt ja klaviatuuri ühe vastuvõtjaga • Lihtne sidumine Logitech Options+ rakenduse kaudu • Ühilduv Windowsi, macOS-i, Linuxi ja ChromeOS-iga
CSV-2555 7-1 USB-C® to HDMI™ Hub 4K60Hz PD3.1 140W 1m/3.28ft The Club 3D® CSV-2555 is a hub designed for users with high-power laptops who want a clean desk setup. Connect your essentials like power, Ethernet, and display behind your desk or monitor and use 1-meter USB-C® cable for all your needs. Declutter Your Desk: The extended 1m (3.28ft) cable gives you the freedom to tuck the hub out of sight for a clean, professional workspace, while keeping essential ports exactly where you need them. High-Speed Power Delivery: By supporting a Power Delivery of up to 140W, this hub can handle even the most power-hungry laptops. Compact, Travel-Ready Design: A compact design that slides easily into a laptop sleeve or pocket. Its lightweight construction makes it the perfect tool for commuters and people who need full desktop functionality without the bulk. Broad Connectivity for Your Basics: Connect your devices like a mouse, keyboard or pendrives simultaneously with ease. The dual USB-A port eliminates the frustration of constant cable swapping.
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
USB extension cable, 10 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number CCP-USB2-AMBM-15 Gembird USB 2.0 A- B 4.5m cable black color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 4.5 m Other information Other information Gold plated plugs No Cable colour Black Additional information Nickel plated
Original part number UA0125 Product name LOGILINK - 10-Port USB2.0 Hub with switch ON / OFF Producer LogiLink Class of product USB hub Number of ports 10 Supported USB standards USB 1.1USB 2.0 Additional information 10-Port USB2.0 Hub with switch ON / OFFCompliant with USB 1.1/2.0Equipped with a detector and overload protectionLED indicatorsExternal power supply included (5V/3.5A)Plug&Play deviceCompatible with Windows and MAC OS
Original part number CCP-MUSB2-AMBM-10 Gembird micro USB cable 2.0 AM-MBM5P black 3m Class of product Cables - USB plugs 1x male USB A-type1x male micro-USB Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
Original part number EE18-M2S3PCB-01 Product name Gembird adapter card M.2 (NGFF) to mini sata (1.8") Producer Gembird Class of product Others controllers/adapters Bus type SATA III Internal connectors 1 x SATA External ports 1 x M.2 NGFF Low-profile card No Length 106 mm Width 45 mm Net weight 17.5 g Additional information 1,8" Mini SATA adapter card for SSD M.2 (NGFF) driveFully compatible with SATA device interface: SATA 3/2/1M2 (NGFF) SSD supported: 3 cm, 4.2 cm, 6 cm, 8 cm
Neomounts by Newstar CPU-D200. Tüüp: Lauale paigaldatav protsessori alus, Maksimaalne kaal (mahutavus): 30 kg, Toote värv: Must. Laius: 230 mm, Laiuse reguleerimise ulatus: 130 - 230 mm, Kõrgus: 540 mm. Kartongist põhipakendi ...
This NewStar CPU mount, model CPU-D200SILVER, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor. This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount. All installation material is included with the product. Max. weight: 30 kg Width: 13-23 cm Height: 39-54 cm Silver
